Table of Contents

• Introduction
• First Impressions and Build Quality
• Power and Performance - The Nuron Battery Does the Heavy Lifting
• The Stand Is a Game Changer
• All the Controls You Need, Right Where You Need Them
• Blade, Bevel and Making Cuts
• Everything Stores Underneath
• Hilti's Own Blade and Accessories
• Dust Management
• The Fence
• FAQ
• Final Thoughts

Introduction

When Hilti comes out with a new tool, I already know the quality is going to be there. That's just what they do. Hilti and I are working together on this one, and I'll be straight with you, that's an easy call when you've got the kind of history with a brand that I do. I actually got a chance to try the SCT 60-22 when it first came out at an event, but there's always something different about getting a tool in your own space and really working with it on your own terms.

I cut a lot of wood with this thing. Mostly pine and plywood, which is what I had laying around, but I also had some leftover oak from when I remodeled my house and threw that at it too. Spoiler, it didn't care. I have a video at the bottom of this article showing the saw in action and some of the cuts I made. I would have put it at the top but my technology skills are about as sharp as a dull blade, so scroll down and check it out when you get there.

First Impressions and Build Quality

The first thing you notice when you walk up to the SCT 60-22 is that it just feels right. Everything about it has that Hilti quality feel, nothing rattles, nothing feels cheap, and the overall fit and finish is exactly what you'd expect from a tool at this level. It's built to do serious work and it feels that way in person.

The controls are all where you'd expect them to be. The on/off switch, the bevel adjustment, the blade height control, all right there on the front of the saw where you can get to them without having to reach around or dig for anything. Yes, all saw are but still good to note.

Power and Performance

This is where I was really paying attention. Cordless saws have a reputation for bogging down when you push them, and that's a legitimate concern if you're doing real work with one. I wanted to know if this saw could handle sustained cutting without dropping off, and the answer is yes, it can.

I ran it through pine, plywood, and that leftover oak and it just kept going. The oak is where I was really watching for any signs of struggle and there weren't any. Clean cuts, consistent power, no hesitation. The 10 inch blade with 3.54 inches of cutting depth has plenty of capacity for anything you'd realistically be cutting on a job site, and the Nuron battery is a huge part of why it performs the way it does. If you've read our full Nuron platform breakdown [Nuron Platform], you already know what these batteries bring to the table. They deliver sustained power in a way that makes cordless tools feel like corded tools, and that's exactly what's happening here. This isn't a saw that feels like it's running on a battery. It feels like a saw that happens to not need a cord.  Plus the run time is like no other saw we have used.

The Stand Is a Game Changer

I want to spend some real time on the stand because I think it's one of the most underrated parts of this whole setup. A portable table saw is only as useful as how easy it is to move around and set up, and the stand Hilti designed for the SCT 60-22 gets that right in every way.

It has large wheels on it so you can roll it wherever you need it, and getting the saw on and off the stand is genuinely simple. I'm showing it here loaded into my truck, which is kind of the point. You break it down, throw it in, drive to the next spot, set it back up, and you're cutting. The whole process doesn't feel like a production. No screws to loosen, just a bar to pull down, it unlocks and slides off the stand.  The stand also does a great job supporting larger material.

The wheels are solid too, not the cheap plastic kind that crack the first time you roll over something on a job site. The whole stand has that same quality feel as the saw itself, which tells you Hilti thought about this as a complete system and not just an afterthought accessory.  The stand is extremely easy to set up and fold away when not in use.

All the Controls You Need

The top of the saw is clean and easy to navigate. The blade cover pops off without any drama when you need to clean things up or swap a blade, and getting a new blade in is straightforward. No fighting with it, no special tools beyond what comes in the box. I've dealt with saws that turn a simple blade change into a fifteen minute ordeal and this is not that. Hilti designed it to be accessible and it shows.  Some saws are hard to get your hand by the arbor to hold the blade when changing.

The bevel goes all the way to 47 degrees which covers everything you'd need for standard job site cuts. Adjusting it is smooth, locking it down is solid, and it stays exactly where you put it through the cut. Same story with the blade height. Everything on this saw has a precision feel to it that you don't always get even on corded saws at this price point.

Blade, Bevel and Making Cuts

The bevel goes up to 47 degrees which covers everything you'd need for standard cuts. Adjusting it is smooth, locking it in is solid, and it stays where you put it. Same with the blade height. You're not fighting sloppy adjustments or wondering if something shifted mid-cut. The saw also comes with a miter gauge, rip fence, stop block and anti-kickback so you have what you need to make a wide variety of cuts right out of the box without having to go buy a bunch of accessories separately.

Everything Stores Underneath

This is one of those details that seems small until you've lost a push stick or a blade guard on a job site and had to stop working to hunt it down. Hilti built storage for all the accessories directly into the bottom of the saw. The push stick, blade guard, riving knife, miter gauge, all of it has a designated spot right there on the tool. You pack up the saw and everything comes with it automatically. Nothing gets left behind, nothing gets thrown loose in a bag. It's all where it's supposed to be every single time.

It also comes with a stop block and rip fence right out of the box, so you have what you need to make a wide variety of cuts without having to go spend more money on accessories before you can actually use it. Hilti set this up so you can pull it out of the box and start working, which is the way it should be.

Hilti's Own Blade and Accessories

Hilti makes their own blade for the SCT 60-22 and I think it's worth using. They test the saw with their own accessories and optimize the combination, so you know it's dialed in right out of the gate.

Dust Management

Nobody loves talking about dust management but on a job site, especially interior work, it matters more than people give it credit for. The SCT 60-22 gives you a couple of options on the back. You can hook up a vacuum for full dust extraction, which is the cleanest way to operate, or you can adjust the chute to aim debris in a different direction if you just want to keep it away from your work area and your material. It's a simple system but it works well and having the flexibility to do it either way depending on the situation is a nice touch.

The Fence

I saved this for last because it genuinely impressed me. The rip fence on the SCT 60-22 has a wheel on the front that you use to adjust it and it is smooth. Like really smooth. I wasn't expecting that level of feel from a portable cordless table saw and it caught me off guard in the best way. A good fence makes accurate rip cuts so much easier because you're not fighting it to get it where you want and you're not worried about it shifting mid-cut. This one locks down solid and stays put. It's another example of Hilti sweating the details that actually matter when you're using the tool in the real world.

FAQ

Final Thoughts

The SCT 60-22 is the best cordless table saw I've used. I'll just say it. The power is there, the cuts are clean, it handles hardwood without breaking a sweat, and the whole package from the stand to the fence to the storage underneath is just well thought out. Hilti didn't rush this to market. They built a saw that competes with corded options and in some ways is more practical because you can take it anywhere without hunting for an outlet.

The stand alone changes how you think about a portable saw. The fence is smoother than it has any right to be on a cordless tool. The Nuron battery keeps it running like a corded saw without the cord. And the fact that everything stores right in the tool means you show up to a job with everything you need and nothing gets left behind.

If you're in the market for a table saw and you're not locked into needing a corded option, this is the one I'd point you to. It's a serious investment at $999 but it's the kind of tool you buy once and use for a long time.