I clicked on it and it says out of stock 🙁
Bigmikez wrote:
20 minutes ago, Bigmikez said:I clicked on it and it says out of stock 🙁
that went quick! someone jumped on it, hopefully a crew member
Lol yeh definitely gone. Hopefully a TIA owns it now
3m worktunes head phones on sale today only $27.95
Sent from my XT1585 using Tapatalk
Kreg SML-C2B-250 Blue-Kote Weather Resistant Pocket Hole Screws – 2″, #8 Coarse, Washer Head, 250 count $9.25! That’s about a dollar more than the 50 count package of the same screws.
DEWALT DWST17804 TSTAK IV Double Shallow Drawers – $22.13
Metabo W9-115 8.5 Amp 10,500 rpm Angle Grinder with Lock-On Sliding Switch, 4-1/2″ – $93.96
Bosch PS21-2A 12-Volt Max Lithium-Ion 2-Speed Pocket Driver Kit with 2 Batteries, Charger and Case – $77.97
Klein Tools 11053 Klein Tools-Kurve Wire Stripper/Cutter, 6 – 12 ga, Blue – $9.94
IRWIN Tools VISE-GRIP Pliers, Bent Nose, 6 3/4-inch (1902420) – NWS Rebrand – $25.94
Festool 571817 ETS 125 EQ Random Orbital Sander – $159.90
Bosch Bare-Tool PS10BN 12-Volt Max 1/4-Inch Hex i-Driver with Exact-Fit L-BOXX Tool Insert Tray – $62.64
Bosch IWBH182BL Bare-Tool 18-volt Brushless 1/2-Inch Pin Detent Impact Wrench with L-Boxx-2 and Exact-Fit Tool Insert Tray – $88.30
DEWALT DCF898B 20V MAX XR Brushless High Torque Impact Wrench with QR Chuck (Bare), 7/16″ – $193.14
Knipex 26-26-200 bent needle nose insulated pliers $16.70, normal price is between $30-$50
BMack37 wrote:
On 6/20/2016 at 0:47 PM, BMack37 said:Kreg SML-C2B-250 Blue-Kote Weather Resistant Pocket Hole Screws – 2″, #8 Coarse, Washer Head, 250 count $9.25! That’s about a dollar more than the 50 count package of the same screws.
Great deal, just ordered, thanks!
BMack37 wrote:
10 hours ago, BMack37 said:Knipex 26-26-200 bent needle nose insulated pliers $16.70, normal price is between $30-$50
Bah, missed out.
wildroamer wrote:
4 hours ago, wildroamer said:Great deal, just ordered, thanks!
I looked at these screws, but I just don’t know what I’d use them for. The chart says that you’d use 2″ screws for joining 1 1/4″ or 1 3/8″ boards together. These are odd dimensions. The Blue-Coat means they’re outdoor rated, but I don’t know that I’d use pocket holes to join deck boards together and they’re too small for 2x4s and too large for 1x?s.
What are you planning on using them for?
[External image (uploads.tapatalk-cdn.com), not copied]
https://www.amazon.com/gp/aw/ol/B009K1H3WI/ref=mw_dp_olp?ie=UTF8&condition=used&m=A2L77EE7U53NWQ
Jimbo
Sent from my iPhone using Tapatalk
Knipex 37-33-125 Short Round Nose Pliers, 5 Inch down to $9.99, only one in stock.
khariV wrote:
On 6/29/2016 at 0:49 PM, khariV said:I looked at these screws, but I just don’t know what I’d use them for. The chart says that you’d use 2″ screws for joining 1 1/4″ or 1 3/8″ boards together. These are odd dimensions. The Blue-Coat means they’re outdoor rated, but I don’t know that I’d use pocket holes to join deck boards together and they’re too small for 2x4s and too large for 1x?s.
What are you planning on using them for?
Hey @khariV, sorry I missed this.
I don’t have a specific use in mind at this time, this is just a size I was lacking. I occasionally join different thicknesses, which is where the odd sizes come in handy.
Metabo SSW 18 LT BARE 18V 1/2-Inch Impact Wrench Bare tool: $76
Makita XRF02Z 18V LXT Lithium-Ion Cordless Autofeed Screwdriver, Tool Only – 157.22 + 20% off with code wdearly20
Killer deal GearWrench 3886 Tap and Die 40 Piece Set Metric for a little more than half off. $35.63 with free shipping from CPO.
Awesome deal. My Irwin tap holders cost that much by themselves.
Awesome deal. My Irwin tap holders cost that much by themselves.
I think the Gearwrench holder set is more expensive too.
Metabo 8.5 Amp grinder for $85 https://www.amazon.com/dp/B00TQEUVUA
Decent price on some 1/2″ impact sockets for Prime Day
TEKTON 4880 1/2-Inch Drive Deep Impact Socket Set, 3/8-Inch – 1-1/4-Inch, Inch, Cr-V, 6-Point, 14 Sockets
[External image (images-na.ssl-images-amazon.com), not copied]
https://www.amazon.com/gp/product/B000NPR34S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
khariV wrote:
19 hours ago, khariV said:Decent price on some 1/2″ impact sockets for Prime Day
TEKTON 4880 1/2-Inch Drive Deep Impact Socket Set, 3/8-Inch – 1-1/4-Inch, Inch, Cr-V, 6-Point, 14 Sockets
[External image (images-na.ssl-images-amazon.com), not copied]
https://www.amazon.com/gp/product/B000NPR34S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
love my Tekton impact socket sets!! very worth the money!
khariV wrote:
On 7/12/2016 at 1:14 PM, khariV said:Decent price on some 1/2″ impact sockets for Prime Day
TEKTON 4880 1/2-Inch Drive Deep Impact Socket Set, 3/8-Inch – 1-1/4-Inch, Inch, Cr-V, 6-Point, 14 Sockets
[External image (images-na.ssl-images-amazon.com), not copied]
https://www.amazon.com/gp/product/B000NPR34S/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Not sure if there was a better deal during prime day, but that set and the inch equivalent go down to $30 for a few weeks sometimes.
jeffmcmillan wrote:
11 hours ago, jeffmcmillan said:Not sure if there was a better deal during prime day, but that set and the inch equivalent go down to $30 for a few weeks sometimes.
According to camelcamelcamel, it’s only ever been down to $30 once, but has dipped down into the $35 range a couple of times last year. The Prime Day deal was $34.
6-piece SK flare nut wrenches, metric for $66(Used, very good). Regular price is $98.
https://www.amazon.com/gp/offer-listing/B0002STULU/ref=dp_olp_used?ie=UTF8&condition=used
I’ve been waiting for a good deal to kick off for the new DCF887 3 speed Dewalt impact. Got a gift card from my credit card points in the mail for Amazon and low and behold, cheapest price I’ve seen it yet is live so I placed my order! Seller Industrial tools.
$103.35 and like $5 for shipping. Normally it’s about $130 so pretty good deal.
Couple of Felo deals.
Felo 0715752041 Set of 13 Torque Screwdrivers $39, next closest is $97:
https://www.amazon.com/gp/offer-listing/B000E60PJG/ref=dp_olp_used?ie=UTF8&condition=used
Felo 07157 22155 Slotted and Phillips Wood Handle Screwdriver set, $16 retail is $25:
Makita DCM500Z 18V LXT Lithium-Ion Cordless Coffee Maker – 33.05
DEWALT DCF898B 20V MAX XR Brushless High Torque Impact Wrench with QR Chuck (Bare), 7/16″ – 190.36
Bosch SKC181-101 18-Volt Lithium-Ion Starter Kit with (1) 4.0 Ah Battery and Charger – 76.42
Knipex 7402200 8-Inch High Leverage Diagonal Cutters – Comfort Grip – 29.89
Makita GA6020 6-Inch Angle Grinder with Super Joint System – 104.41
Bosch DH507 12-Pound 10-Amp Variable Speed SDS-Max Demolition Hammer – 244.84
JimboS1ice wrote:
4 hours ago, JimboS1ice said:
Well thanks Jimbo I just bought this!! I don’t know if I should be angry or happy right now going down the festool road could be expensive.
DR99 wrote:
5 hours ago, DR99 said:Well thanks Jimbo I just bought this!! I don’t know if I should be angry or happy right now going down the festool road could be expensive.
Hahahaha well well well……oh how the mighty have fallen 😉
Let me know when you get it DR! Also you might want to look into some DC or an adapter for your shop vac! Your going to love the saw. Wait till oh splurge on the base kit. Wow.
I need to find a good deal on a DC next or we can start the get DR a Festool dust collector gofundme. J/K please don’t I was hoping to win a Festool contest a few times.
ChrisK wrote:
9 hours ago, ChrisK said:Hahahaha well well well……oh how the mighty have fallen 😉
Let me know when you get it DR! Also you might want to look into some DC or an adapter for your shop vac! Your going to love the saw. Wait till oh splurge on the base kit. Wow.
What blades are you using Chris? The Festool blades are not horribly priced but they don’t come in a variety pack. There have always been tools I wanted in Festool but could never justify. Next on the wish list is a TS55REQ and some sort of dust extractor. Kapex while cool I just can’t justify though. I would also like some of their sanders eventually also.
DR99 wrote:
12 minutes ago, DR99 said:What blades are you using Chris? The Festool blades are not horribly priced but they don’t come in a variety pack. There have always been tools I wanted in Festool but could never justify. Next on the wish list is a TS55REQ and some sort of dust extractor. Kapex while cool I just can’t justify though. I would also like some of their sanders eventually also.
Actually I do use the Festoo blades. They are really fantastic and well constructed. They ain’t expensive either. I also have a bunch of Bosch blades that I use and between the two, I don’t think there is a better manufacturer of blades, in my humble opinion.