My new box and router. Oh and I got a particular Sawzall from a member. I have to take a quick pic but thank you Regopit and Mike!
Outside of having a disturbing amount of yellow and not enough red and blue, very nice, Chris!
Signed Kurt, the Milwaukee/Bosch fanboy…
Nice “toys” Chris!! I see you have the little OmniSquare too. That’s a handy little square.
I get excited over new flat washers, cause I know I will use some kind of tool with them…..
@chris: great stuff you got there…thats a powerful router 😛
I’m really liking that square a lot and not a bad price. Love the positive locks on it and the fact that it’s made here in the USAoveranalyze wrote:
Nice “toys” Chris!! I see you have the little OmniSquare too. That’s a handy little square.
ChrisK1970 wrote:
I’m really liking that square a lot and not a bad price. Love the positive locks on it and the fact that it’s made here in the USA
Yeah I found it by accident one day on the web and ordered one. I did a thread about it on BTP and a bunch of guys ordered one. It seems well built and accurate enough for what I use it for.
Well Andrew that is why I bought it 🙂 it was a great review!
the omnisquare looks pretty cool, i just watched it on youtube and i have to say – i need one now….
how much you guys paid for it?
I think it was $25 with shipping if I remember correctly.
$24.95 via PayPal and the guy shipped super quick. And the posi stops on the angles are freakin’ awesome.
Here’s the link Madman
Damn you guys my wish list cannot keep up with all this stuff!
overanalyze wrote:
Yeah I found it by accident one day on the web and ordered one. I did a thread about it on BTP and a bunch of guys ordered one. It seems well built and accurate enough for what I use it for.
BTP?
regopit wrote:
Not as exciting as new tools but I did pick up a new Milwaukee tool pouch for my electrical tools and some storage boxes.
[External image (i856.photobucket.com), not copied]
Love those Dewalt boxes…
ChrisK1970 wrote:
Here’s the link Madman
thanks 😀
i’ll order one next month…going to put a huge order on my credit card from KMS tools 😀
Nice Madman, what’re you getting?madman_us wrote:
thanks 😀
i’ll order one next month…going to put a huge order on my credit card from KMS tools 😀
way to much stuff haha – 4 new tools 😛
its half price from the price here in the states….
BK13 wrote:
BTP?
Bethepro.com it’s another forum.
Stopped by a local tool supply yesterday and picked up the Makita multi tool, was actually a little cheaper than the depot sells it for. Wanted to buy Makitas new cut out tool as well but they didn’t have it I stock. On the way home stopped at the Depot and grabbed Dewalts multi level workshop.
overanalyze wrote:
Bethepro.com it’s another forum.
Thanks.
NICE MIKEY!! Let us know how U like dewalt storage unit I’ve seen these at HD awhile back.MikeyB wrote:
Stopped by a local tool supply yesterday and picked up the Makita multi tool, was actually a little cheaper than the depot sells it for. Wanted to buy Makitas new cut out tool as well but they didn’t have it I stock. On the way home stopped at the Depot and grabbed Dewalts multi level workshop.
MikeyB wrote:
Stopped by a local tool supply yesterday and picked up the Makita multi tool, was actually a little cheaper than the depot sells it for. Wanted to buy Makitas new cut out tool as well but they didn’t have it I stock. On the way home stopped at the Depot and grabbed Dewalts multi level workshop.
great stuff you bought. support the local stores 😛
grabbed that kit the other day from lowes. i thought i’ll give it a try, since im going to hand sand the dining room.
[External image (img.photobucket.com), not copied]
MM, let us know how that sander works, I saw it at Lowes also and was tempted to pick it up as well
Nice! I remeber you telling me bout this, how much u spend on it?
Its just 35 bucks. Not much more as a regular hand sander
Madman, does that take half sheets of paper? Am I correct I assuming it’s non powered so basically you hand sand with the vac attached?
MM those work pretty well. We use these for hospital work. We attach them to a 5 gal bucket dust separator with water in it. I think we got the separators from HD.
ChrisK1970 wrote:
Madman, does that take half sheets of paper? Am I correct I assuming it’s non powered so basically you hand sand with the vac attached?
1/3 sheet sand paper, but to me it looks like the normal size for every hand sander…
right its not powered buy electric – just pure man power 😛 the vacuum attachment helps with the dust…that was my most important concern. because when i did the rest of the house 2y ago….i sanded the ceiling with a normal hand sander and the dust was all over me.
i really wanna see how that thing works out.
Poisonfangs85 wrote:
MM those work pretty well. We use these for hospital work. We attach them to a 5 gal bucket dust separator with water in it. I think we got the separators from HD.
oh thats interesting with the water filled separators
madman_us wrote:
1/3 sheet sand paper, but to me it looks like the normal size for every hand sander…
right its not powered buy electric – just pure man power 😛 the vacuum attachment helps with the dust…that was my most important concern. because when i did the rest of the house 2y ago….i sanded the ceiling with a normal hand sander and the dust was all over me.
i really wanna see how that thing works out.
Thanks Madman! Looks like a really cool unit that’s going to keep you clean! Not to mention the lack of dust everywhere, your wife will love you!
oh thats interesting with the water filled separators
All look like good buys! Really like the clamps, somehow they are something that I don’t own much of.
Nothing major, another adjustable wrench, and a Milwaukee locking pliers:
[External image (i59.photobucket.com), not copied]
great BK – i have the same Milwaukee locking pliers
Nice buys BK!BK13 wrote:
Nothing major, another adjustable wrench, and a Milwaukee locking pliers:
[External image (i59.photobucket.com), not copied]
How do you like those Milwaukee locking pliers?
Yeah Mike first impressions of the pliers? I have been meaning to get some of the c clamp style for metal framing.
I have no experience with the C-clamp style (but me 5 year old REALLY wants some every time we go in HD) but I probably have 6-9 of the regular models in various sizes. Compared to new, PRC-made Irwins, they are much better made, without the seemingly automatic unlocking that I sometimes get from new Irwins, better finished with kind of a matte surface finish, and a lot less slop in the pivots. I haven’t really beaten on them much, but I have no fear they will hold up well. The adjusting screw with the screwdriver hole seems like a cool feature, but as of now I haven’t needed to make use of it.
I like ’em.
Wow. “Me 5 year old”. Talk like a pirate day is Sept. 19th, idiot. Doh!
Those Torque Locks look real nice
i really like the milwaukee torque pliers…they come in handy for all kinda applications
Some new demo chisels….to go with my new SDS Max rotary hammer drill!
great tool you got there man.
i have the smaller version – the RH228VC
[External image (ecx.images-amazon.com), not copied]
overanalyze wrote:
Some new demo chisels….to go with my new SDS Max rotary hammer drill!
Hey Andrew are your gonna do that comparison? You should post that unboxing video too! Good stuff dude!!
Here ya go.
Yes I will be doing some sort of video of it in use. I don’t have a similar tool to do a comparison but maybe I can do some misc. test with it.
great little video 😛
Nice unboxing video bro!!
Got a special delivery tomorrow. I’ll post some pics then. Stoked.
My Milwaukee backpack should arrive tomorrow.
Nice, are you going to post some pics Jason?