My recent project

Conductor562Member since Nov 2011

No pics???

Blasphemy!

NicholasShetleyMember since Nov 2013

Tonight we put the oil pan and chrome timing cover on with new gaskets and seals. The lifters are in as well. The engine sounds like it makes great compression. There isn’t a whole lot left to do but wire everything up and hook up the lines and finish the interior and then it should be done. We are starting to see the light at the end of the tunnel.

NicholasShetleyMember since Nov 2013

Here is the engine now. It is as far as we can get it done here. We haven’t fired it up yet though as we need to break in the cam. That consists of running it at 2000-2500 rpms while fluctuating. Our shop is a mess right now but since the engine is done we can start on our many other projects at home.

1R954Baker-hvacMember since Mar 2014

That’s gonna be awsome… I love classics…

JavierMember since Aug 2013

Looks great, I can’t remember if you already said so but did you guys paint it yourselves?

Harold WrayMember since Jun 2013

Looking F’ing awesome!

NicholasShetleyMember since Nov 2013

Javier wrote:

Looks great, I can’t remember if you already said so but did you guys paint it yourselves?

We did paint it ourselves.

NicholasShetleyMember since Nov 2013

We took out the engine to my grandpas place yesterday evening. I doubt it will be done in time for prom now. It is on the 26th and we still need to wire everything up and put the accessories on the engine and run the brake lines on the front end. I will probably wind up taking his 64 Corvette instead.

regopitMember since Feb 2013

Just the 64 vette? I guess it beats walking.

NicholasShetleyMember since Nov 2013

Lol yeah. We will need to wake it up from hibernation though. It is way faster than walking.

NicholasShetleyMember since Nov 2013

The transmission is now done other than painting the bottom of it. I put a new pan gasket and filter on it as well as new front and rear seals on it. It should be a good transmission as it had a very, very small amount of metal shavings in it. We also took the corvette out today for lunch and on a parts run today and it ran like a champ. It has a rebuilt 350 bored 30 over and has a small cam along with headers.

JavierMember since Aug 2013

That corvette looks great. My step dad had one i think an early 80’s and it had some muscle to it. Engine needed work and he was going to work on it but ended up getting rid of it

Conductor562Member since Nov 2011

I went to prom in my buddy’s 91 Lincoln Continental with plastic over the back glass.

I had a 5.0 Mustang, but the Lincoln provided much more room for my intended activities. Good thing to. On they way to the after prom we got stuck behind an accident where some dude got hit by a semi on the interstate. We sat there almost 3 hours.

By the time the road was re-opened I was to drunk to drive away.

NicholasShetleyMember since Nov 2013

The corvette made it home safe and sound. The only issue with it is that there is a loose connection on the temperature gauge but other than that it drove perfectly. Everyone loved the car but sadly the truck wasn’t done. We have the dash pretty well wired up and are about ready to put the engine in soon. What’s bad is my grandpa is already looking at another project car. He is wanting a mid 70’s El Camino or a 40 or 41 chevy convertible.

NicholasShetleyMember since Nov 2013

We now have the dash and lights wired up with the exception on the water temp gauge. We have all of the lights wired up and we tested them today and they all worked great. The headlights don’t look the greatest in my opinion but they will work for now. We should be putting the engine and transmission in early next week. We will be burning rubber in no time.

NicholasShetleyMember since Nov 2013

Whoops I forgot the pictures. Here they are.

NicholasShetleyMember since Nov 2013

We now have the engine and transmission in now. We still need a driveshaft but we can’t find one short enough so we will probably have to get one made. We will also have to make a grill for the radiator but we found some aluminum that will work. I polished that up and for the aluminum being scrap, it turned out fairly good. Overall it is starting to look like a hot rod now.

Conductor562Member since Nov 2011

Motor looks good. What kind of paint did you use?

NicholasShetleyMember since Nov 2013

Thanks conductor! It is the same paint as the frame just in a rattle can. It is rust oleum sunrise red. I just thought I would let you guys know I have been working on this for almost a year now. I came in when my grandpa was working on getting the body ready for primer and we were working on boxing in the frame and beefing it up. My grandpa has been working on this for a whopping five years. If I remember correctly he traded an arc welder for it. It was just bits and pieces and what was there needed new metal. The top rounded portion if the cab just above the doors needed new metal along with the rocker panels and the entire floor of the bed and cab. This thing has made a complete turnaround. No one can believe what it looks like now compared to what it used to. Sadly I don’t have any pictures of when he picked it up, I never did see it either though.

DR99Member since Nov 2012

That Rustolium paint is durable stuff. I don’t know how they can still make it that good with all the environmental rules they have now, but that paint will take a beating!! Looks really good Nicholas I would love to take on a project car or truck one of these days just for the fun of it. You never do any of these things to make money in the end. You always end up spending way more cash than you ever planned on spending because you decide to “upgrade” things while its easy to do now.

NicholasShetleyMember since Nov 2013

Don’t expect it to be like it is on TV DR. One of my friends dad was offered a job at a local custom shop. They wanted him to build a total of five rat rods in a total of fifteen weeks in his home garage. There is no way in hell he could have one built in fifteen weeks. Look at how long we have been building this.

DR99Member since Nov 2012

I can take a lifetime or more for some projects. Look at how many uncompleted projects get sold at estate sales, or moving sales. The amount of time it takes is a commitment. Once kids and other responisbilties fit it in it’s hard to justfity the Mustang or Chevelle or any restoration you might be working on. I think Family life shuts most of them down for a long time or, forever.

Conductor562Member since Nov 2011

He couldn’t build 5 cars in 15 weeks? It only takes an hour on TV 😆

It’s just another example of TV downplaying reality.

NicholasShetleyMember since Nov 2013

Well the thing is on tv that they buy everything new, they get their tools furnished for them and they have 15-20 guys on one car. The only show that I feel is realistic is counting cars. They never tell how long it takes to do a vehicle.

JavierMember since Aug 2013

Looks great Nicholas! Cant wait to see it finished, maybe you can shoot a video making donuts

NicholasShetleyMember since Nov 2013

That might go bad since it doesn’t have power steering. Burnouts will happen. We need to break in the cam soon so I might film a portion of that or I will do a walk through of it when it is done.

Matthew WiswellMember since Apr 2014

Man, this looks like a really cool project!

NicholasShetleyMember since Nov 2013

Thanks!

NicholasShetleyMember since Nov 2013

I would say we are almost 90% done with the truck now. We need to hook up the transmission cooler tomorrow and pick up the driveshaft soon. We are going to have to make a lower radiator hose because we can’t find one at any local parts store. We did get the alternator brackets made and installed. I would have thought that out of 100 million small block Chevys out there one would have had brackets that would have fit but no. We just copied the brackets off of the Corvette. We finally got the brakes bled after two different master cylinders and three proportions valves and we had to modify the pedal so it would go on the other side of the column and be much easier to drive. Although this thing will be hard enough to drive since I am 6’3″. I will keep you guys updated as we get more done.

DR99Member since Nov 2012

Cool news that the truck is nearly done. I bet you can’t wait to get it going on the road!

NicholasShetleyMember since Nov 2013

We now have the radiator and hoses hooked up. We had to make the lower radiator hose since you can’t just run to the parts store and get one. We welded a couple of bent pieces of exhaust tubing together and I polished it up. We also have the driveshaft cut down and balanced. We are getting closer every day.

NicholasShetleyMember since Nov 2013

Here are more pictures of the truck.

JavierMember since Aug 2013

Looking great. I’m digging the black with red accents

firefighter4187Member since Mar 2013

i love the black and red combo, looks great on trucks. 

DR99Member since Nov 2012

I think you might need to cut some Milwaukee Electric Power tool cCmpany vinyl and put it on the sides of the truck 🙂 Just kidding, but part of me thinks it would be a pretty cool photo opportunity!

NicholasShetleyMember since Nov 2013

Someone said we should get a sponsorship when it was first painted.

NicholasShetleyMember since Nov 2013

We now have the engine primed and it runs 45 pounds of oil pressure with a slow speed drill so the bearings are in great shape. The engine seems to run good compression as well for a stock small block. Right now we are just trying to get it running since a lot of the stuff can be done anytime. My grandpa wants to get it certified by the NSRA and there are certian things you need for that such as emergency brakes and wipers and other small things. We also have the grill shell painted and have the grill installed in it. I tried to buff it out to a mirror finish but that would have took it a while but it turned out much better than the both of us expected. I think it looks pretty good.

JavierMember since Aug 2013

Nice! good job Nicholas

regopitMember since Feb 2013

Looking good!

NicholasShetleyMember since Nov 2013

We finally got it running today and started to break in the camshaft. That involves running the engine at 2000-2500 rpms for about 30 minutes to harden the cam. You also need to use break in oil or you will wipe out the cam in seconds. We had painted the headers with ceramic paint hoping that it wouldn’t burn off in no time at all but it lasted maybe 30 seconds before it started flaking off. The paint on the engine held up well though. Overall I am extremely pleased with the Rustoleum paint. I didn’t record any of it unfortunately but we aren’t finished breaking it in either. It can only run 10 minutes at a time before it goes above 220 degrees. We will need to get a shroud and electric fan for it before we can drive it. The engine ran strong the whole time though. It also ran great oil pressure the entire time as well, it never dropped below 45 psi. The engine sounded great as well.

DR99Member since Nov 2012

That’s great to hear that engine is running good Nicolas. Too bad the paint didn’t last on the headers you would have though ceramic paint would have held up better.

BigmikezMember since Jun 2013

Very cool Nicholas!! I work at a body shop and we’ve been workin on a 55 chevy truck and man is it time consuming but the out come will be well worth it especially working with your gramps, enjoy every moment man and wait to c the big finish!!

NicholasShetleyMember since Nov 2013

Thanks Mike! We now have the engine fully broke in and we now have about two hours of runtime on it. It hasn’t burned any oil or leaked a drop. We did put another carberautor on it because the quadrajet that was on it flooded the engine at idle. My dad had a 600 cfm Holley at our house that was a good one and it worked like a charm. We also fixed the cooling issue as well by putting a fairly large electric fan on it. It puts out 2700 cfm of air. We have it mounted behind the grill. It now runs 180 degrees and for it being in a fully enclosed garage that is great.

BigmikezMember since Jun 2013

Lookin awesome!!

JavierMember since Aug 2013

Cool picture can’t wait to see the finished product

NicholasShetleyMember since Nov 2013

I now have the carberautor on the truck tuned and it runs and starts great. We also had exhaust installed on it last week and that really toned it down. Before you couldn’t talk with each other with open headers on the engine. We also finished up the interior other than install the seats. The seats might nor work though, I can’t use the current ones. My knee gets caught between the steering wheel and the window crank. For me there isn’t much room at all, but I am also about 6′ 3″ so that is understandable. From the floor to the top of the cab is 55-56 inches. I also took a couple videos of the engine running but they are too big to be uploaded here. They might have to be uploaded to YouTube. The pictures aren’t wanting to upload either.

BigmikezMember since Jun 2013

Nice!!

NicholasShetleyMember since Nov 2013

Here is one video of it running. I will try to have the other video up this evening.

Conductor562Member since Nov 2011

It’s getting there.

NicholasShetleyMember since Nov 2013

Well, today I finally made it back out to my grandpas today. I live in a dorm in the campus of my tech school since I live 150 miles away. I do come back on weekends though. We went though the front end and tightened up everything and greased it as well. We also took it out on the road for a test run and it drove great for what it is. We did forget to hook up a vacuum line to the transmission so it didn’t shift right. It definitely is not a slouch. All of the local car shows are starting next week and will go until about the end of October. We will try to take it to every show we can make it to.

You are the influencer. Post it to 4.4 million followers.

Hit record. We’ll handle the rest.

Upload your review