My recent project

Archived from the Tools In Action forum (Around The House). This thread is read-only.

NicholasShetleyMember since Nov 2013

I figured I would share the project I am working on(it is my grandpas though). We are hoping to have it done by late April in time for me to drive it to prom. We are about ready to paint it. We are wanting to paint the body flat black and the frame and firewall red. The engine will be a regular chevy 350 with a cam. That should be more than enough power considering it weighs around 2600-2700 pounds. I will try to keep this updated on the progress.

JavierMember since Aug 2013

That will turn out great. Not sure how power full a 350 Chevy engine is but it sounds tough. I forgot what the numbers stood for, cubic inches? Horsepower? Either way it will make a high power to weight ratio because that truck is light. My car is considered light at about 2800-3000 lbs.

NicholasShetleyMember since Nov 2013

There are so many different variations of the 350 who knows what they make. It will probably be around 350-375 horsepower which will be plenty for it. We are hoping to paint it next week. We are sanding it with 400 grit paper to smooth it out.

Harold WrayMember since Jun 2013

Wow looks great. No rust. Complete pan off restoration. That’s going to look really cool with flat black with the frame and firewall red.

Also I’m sure later on you’ll remember the fun time you had with your grandpa.

NicholasShetleyMember since Nov 2013

It has been fun. He fixed the rust already. It has some new sheet metal on the doors and the bottom of the cab. We saw another one with the red frame and firewall and that made us choose it. Also the bed has been made 10 inches shorter and the cab has been chopped some.

JavierMember since Aug 2013

That’s a lot of power, it will make for a good hot rod truck

NicholasShetleyMember since Nov 2013

Look for black marks on the school parking lot on prom night 🙂

NicholasShetleyMember since Nov 2013

We are painting it today. I will have pictures on Monday hopefully. It is turning out pretty good so far.

Eric – TIAMember since Jan 2010

I can’t wait to see it.  That is one thing I am lost on.  I wish I could do stuff like that, but I would be so lost.

NicholasShetleyMember since Nov 2013

Don’t worry it isn’t us that are lost it is just some if the parts. We have lost a few of the smaller things so far. We haven’t tooled too hard though.

Eric – TIAMember since Jan 2010

No I didn’t mean lose parts.  I meant if I tried to tackle a project like that I would have no idea where to start, what to do or how to get things back together.  

NicholasShetleyMember since Nov 2013

Oh I see. You just need to get the wheels turning.

DR99Member since Nov 2012

I took all sorts of welding and metal working classes in High School plus computer classes. I was a huge gamer nerd even back then.The class that’s probably saved me the most money out of all of them is one semester of small engine repair its fucking crazy how much they want for a basic service on a lawnmower or snow blower its over 100 bucks just to clean the carb replace the sparkplug and lube a few things.

NicholasShetleyMember since Nov 2013

I am as well. I took all of the ag classes as well. I took the tractor restoration one and the ag structures (we would build round bale feeders and troughs). I have improved on my welding skills a lot. The teacher said I am a better welder than him on a mig welder. One of the hardest welding methods to get used to is tig welding. The one we use has a foot pedal to control the amount of heat.

Eric – TIAMember since Jan 2010

I took an automotive class in high school, which they don’t offer anymore.  Just wish at that time I took things serious.  I was to busy goofing off.  I guess now I am paying the price.

NicholasShetleyMember since Nov 2013

They don’t have one here.

regopitMember since Feb 2013

Very nice. It good to see a steel body and not fiberglass.

 

It’s good to have welding skills because if you ever need a job you will always have something to fall back on. 

NicholasShetleyMember since Nov 2013

There is one spot where the paint ran ( I did not do that ). We had a kid catch his pant leg on fire today but he was ok it just singed the pants a little.

NicholasShetleyMember since Nov 2013

Here is what it looks like now. I guess next is to start on the interior.

Harold WrayMember since Jun 2013

Cool.  I’m sure your just inching to finish it and drive it. 

NicholasShetleyMember since Nov 2013

I am but it is still a good ways off. I still needs the firewall and frame painted, the interior, engine and transmission, and the front and rear end need work done on both but that won’t take too long, and we still need to put the tonneau cover on the bed. My dad and I are going to rebuild the engine and transmission (turbo 400, for those who don’t know what that is it is a gm 3 speed auto used in their trucks and bigger cars.) I bet we will have it done by prom (late April I think). Last year I drove his 64 Corvette to prom and we had a few issues with it but we got it done one hour before it started. That was the first time it had been driven since the previous October so a few hiccups were expected.

Conductor562Member since Nov 2011

Great looking project. Can’t wait to see the progress!

NicholasShetleyMember since Nov 2013

We are working on putting the cover on the bed and straightening the tailgate now.

NicholasShetleyMember since Nov 2013

Today we drilled the holes in the bed for the snaps to put the cover on. The guy doing the cover is supposed to bring it by Saturday (weather permitting. They are calling for 6 or so inches of snow by Friday.).

DR99Member since Nov 2012

Ughh that evil 4 letter word snow :/ I have a bad ass snow blower but I still don’t like dealing with it.

Harold WrayMember since Jun 2013

6 inches. Ugh

Conductor562Member since Nov 2011

I’m ready for a good snow.

NicholasShetleyMember since Nov 2013

I can handle the snow so long as there is no ice. That ice is mean stuff.

NicholasShetleyMember since Nov 2013

Well we got out of school at 11 and there is already an inch of sleet.

JavierMember since Aug 2013

Man I wish I had those skills to take on a project like this

NicholasShetleyMember since Nov 2013

I am a huge perfectionist as well so that is both good and bad.

NicholasShetleyMember since Nov 2013

The bodywork takes a lot of time. It took him a good two years to get it to where it was before we primed it. Also over the years I have realized how much construction and automotive work have in common. There is wiring, plumbing (fuel, brakes, ect.) and more (that is all I can think of now).

NicholasShetleyMember since Nov 2013

We finally got the cover and the tailgate is now painted.

Harold WrayMember since Jun 2013

Cool. Looking forward to seeing it all together.

Conductor562Member since Nov 2011

Harold Wray wrote:

Cool. Looking forward to seeing it all together.

+1

NicholasShetleyMember since Nov 2013

You guys aren’t the only one.

JavierMember since Aug 2013

Can’t wait to see some pics

NicholasShetleyMember since Nov 2013

I forgot to take any last time I was out there. I will probably be out there tomorrow since there is no school again (we have had the whole week off and we are supposed to get 3 or so inches of snow Saturday). My grandpa finally got the red paint the other day. I think we are going to put down the aluminum insulation in the cab next.

NicholasShetleyMember since Nov 2013

Here is the bed now

regopitMember since Feb 2013

Looking good. Keep us posted

NicholasShetleyMember since Nov 2013

I will try. I left early today because the weather was getting a little icy.

JavierMember since Aug 2013

It’s coming along nicely

NicholasShetleyMember since Nov 2013

Other than the one corner on the cover it fit perfectly. We have started on the interior now. That reminds me does anyone know of a good jigsaw blade for aluminum under 1/8 inch.

NicholasShetleyMember since Nov 2013

We didn’t get much done on it today because we had to get a transfer case for his truck. We got back around 1:30. We are finally having school after the big snowstorm. It is supposed to be around 50 all this week.

JavierMember since Aug 2013

I’m glad it doesn’t snow here but it would be nice if I could experience snow just to see it.

NicholasShetleyMember since Nov 2013

It gets really old really quick.

Conductor562Member since Nov 2011

I’m always excited about the first 2 or 3 snowfalls of the year. After that, it just gets tiring. 

NicholasShetleyMember since Nov 2013

This was the first one. I don’t mind it if there is just a couple inches which is what we usually get but after that is is just a hassle.

firefighter4187Member since Mar 2013

Im ready for a 70 degree winter hahaha! Damn thats a nice project you got going, I will have to start one, i bought the power stroke, hoping to repaint it bye the end of january, doing it all my self. I have always likes the 75-78 ford f250 ranger “high Boys” as they called them, make a great 4 wheel drive.

NicholasShetleyMember since Nov 2013

I wouldn’t get your hopes up on the end of January thing because it takes a good while to do all of it. If it is a rust free truck it could be done but I would say by the end of February since it is just you and since you have school and such. The paint brand I would go with would be DuPont. Yes it is expensive but it will be worth it in the end. It will last 20+ years if you take care of it. I would definitely price the paint before you get started. I’m not trying to talk you out of it, I’m just saying it is more time consuming than most people think.

You are the influencer. Post it to 4.4 million followers.

Hit record. We’ll handle the rest.

Upload your review