Its hard to get rid of stuff especially when it has tons of emotional value.
Yeah it is. We picked up the engine today. We need to put new valve covers on it and possibly a new rear main seal. The engine ran strong previously, it would light up the tires in the previous truck it was in up to third gear.
Well not as bad as the “fix” gm had for my grand prix it’s known to have issues with valve covers leaking the front valve cover the worst as its transversely mounted V6. It was bad enough that they were having engine fires so gm had a recall the fix was to change the way the spark plug wires ran and not fix the problem of the oil leak on the non GTP supercharged cars the supercharged cars did get new gaskets.One of the things that drive you nuts about automakers!!! It’s sad to see her slowly die the heart is in good shape but the body is failing it needs a new front wheel bearing bad, and the shocks on the back replaced, I don’t have a “shop” to work in during the winter so repairs are more expensive.
This one was as close to burning as one could get. The exhaust manifold wan cherry red and then it blew spewing oil everywhere. My uncle thought he was going to have to watch it burn. The front fenders have holes rusted in them big enough to fit your arm into. The rocker panels are gone. The truck used to belong to a local drilling company and it spent most of its life behind the drill rig going to Arkansas back and forth. It has been behind the rig so much that the chrome is gone off of the bumper.
Dealership=Stealership
We have the brakes ready now, the front end is painted and ready to go except we need new bearing races for the wheel bearings. The interior guy has started on the interior, so far he has the door panels and headliner done. We should have the emergency brake ready by tomorrow, we need it to get the truck registered for the NSRA.
The seats are done now. Here is what they look like.
Wow those seats are hot. Good stuff Nicholas
Thanks Javier. The interior is almost ready for the carpet. I will probably be out more this week since we are supposed to get more snow and ice tomorrow. I think we have missed one month of school due to the weather already.
Looking great.
Its got that milwaukee fuel color scheme going on, I bet theres a lightning bolt somewhere on there
looking good keep the pictures coming.
Black and red is a great scheme for a 30’s piece. Looks great so far.
I never realized that Javier! Maybe we can get sponsored. Thanks guys.
We finally have dads truck running now. It smokes like a freight train due to the oil everywhere. It was one thing after another with it. The fuel pump went out on it, the new pump wouldn’t fit so we had to get yet another one. The starter went out this evening as we were almost done. It should be good now though. Next for that is to see why the old engine puffed.
The head liner is installed and the rest of the interior should be in by the end of the week. Next week is supposed to be in the 50s so we will paint the frame and rear end hopefully. We are starting to see the light at the end of the tunnel. After that all that is left will be the window cranks and door handles which we will pick up Sunday, the engine, transmission, wiring and, plumbing the fuel and brakes.
That’s great to hear. I don’t know about restoring old cars but can you wire the doors to have “modern” tech like electric windows, door locks and even motorized mirrors?
You can do the power windows and possibly locks but I don’t think we will have side mirrors. They make kits for the windows but I’m not sure about the locks. We aren’t interested in that.
Javier wrote:
That’s great to hear. I don’t know about restoring old cars but can you wire the doors to have “modern” tech like electric windows, door locks and even motorized mirrors?
You could do it, but if you ever plan to show the car you’re sunk. Shows are all about being true to original. Plus, it’s not going to be a daily driver. Lack of modern convenience is all part of the experience.
Umm… You haven’t seen an original compared to this one yet. Mag wheels weren’t original, nor the small block or the 3 inch chop of the cab. If it was an original it would be a big no on the power windows. For the sake of keeping it simple we are keeping manual windows.
The more mechanical things are, the less of a chance for electrical screw ups haha
Well one regulator is stripping out but we have a new one ordered. Oddly enough it was the passenger one.
The interior is almost done. All that is left is to put the door panels in and the seats and that is it for the interior. It looks great so far. It was the upholstery guys last car that he was doing. All that is left is to paint the frame and rear end and put new gaskets and the cam and valve train in the engine and put the new heads on and then wire it up (aftermarket wiring harness) and that will be all of the big items done.
Sound great. Can’t wait to see some pics
I would have took some today but we took the door panels to the guy to get them covered. I will try to take some Friday.
Cool, I bet your just itching to test drive it
We finally have the frame and rear end painted. We painted the door trim and dash as well, we were going to wood grain the dash but we decided it wouldn’t be worth it. The glass is being cut for everything this week. Now everything should fall into place. My grandpa thinks that the engine has a cracked head on it, but he has a fairly potent set of aftermarket ones ready to go. We still need a wiring harness but we might have found one today.
It’ll start going quick now. Looking good Nick
Thanks conductor. Everything should fall into place now. Here is what the rolling chassis looks like.
Can’t wait to see the finished product!
looks like it is coming together.
That’s a nice hot red color, looks nice
I like the color of it. Ignore the way the tires look in the front. They don’t look like that at all in person.
We finally have the glass in except the windshield. It is going in tomorrow since I’m off for “spring” break. We might be putting the bed on tomorrow as well. My dad and I should be starting on the engine soon. So far the only bad thing is since the cab is chopped there is a large lack of headroom, being 6′ 2″ doesn’t help either. The pictures are of the finished rear end and the interior. If the carpet looks wavy it is because it isn’t fully glued down yet.
Awesome. Can’t wait to see the finished car.
That’s awesome!!!!!
Thanks, we should be putting the cab on tonight.
Looks great, wish I could help, looks like fun to work on
It is fun. The only thing that wasn’t was all of the sanding.
Sanding is usually the shittiest part of any project.
Looks great
We put the cab on today and bolted up the front end. Here is what it looks like now
Looking awesome Nick! The chop is going to make the whole project.
The top of the cab barely comes up to the bottom of my rib cage lol. Everyone who comes out to visit falls in love with it.
Nice!
The new cam is in. The engine needs painted and then put back together then it will be done. We are trying to decide a color. We are either going to paint it black or red, what to you guys think?
I personally think red looks really good with all the chrome work on the engine, but black is probably easier to keep clean and will look nice longer.
I should mention it will have a chrome timing gear cover and corvette valve covers.
Red will be a nice contrast to the black body
Well the engine is painted. We went with the same red as the frame. I didn’t take any pictures as the engine is still drying.
