Archived from the Tools In Action forum (Around The House). This thread is read-only.
I figured I would share the project I am working on(it is my grandpas though). We are hoping to have it done by late April in time for me to drive it to prom. We are about ready to paint it. We are wanting to paint the body flat black and the frame and firewall red. The engine will be a regular chevy 350 with a cam. That should be more than enough power considering it weighs around 2600-2700 pounds. I will try to keep this updated on the progress.
That will turn out great. Not sure how power full a 350 Chevy engine is but it sounds tough. I forgot what the numbers stood for, cubic inches? Horsepower? Either way it will make a high power to weight ratio because that truck is light. My car is considered light at about 2800-3000 lbs.
There are so many different variations of the 350 who knows what they make. It will probably be around 350-375 horsepower which will be plenty for it. We are hoping to paint it next week. We are sanding it with 400 grit paper to smooth it out.
Wow looks great. No rust. Complete pan off restoration. That’s going to look really cool with flat black with the frame and firewall red.
Also I’m sure later on you’ll remember the fun time you had with your grandpa.
It has been fun. He fixed the rust already. It has some new sheet metal on the doors and the bottom of the cab. We saw another one with the red frame and firewall and that made us choose it. Also the bed has been made 10 inches shorter and the cab has been chopped some.
That’s a lot of power, it will make for a good hot rod truck
Look for black marks on the school parking lot on prom night 🙂
We are painting it today. I will have pictures on Monday hopefully. It is turning out pretty good so far.
I can’t wait to see it. That is one thing I am lost on. I wish I could do stuff like that, but I would be so lost.
Don’t worry it isn’t us that are lost it is just some if the parts. We have lost a few of the smaller things so far. We haven’t tooled too hard though.
No I didn’t mean lose parts. I meant if I tried to tackle a project like that I would have no idea where to start, what to do or how to get things back together.
Oh I see. You just need to get the wheels turning.
I took all sorts of welding and metal working classes in High School plus computer classes. I was a huge gamer nerd even back then.The class that’s probably saved me the most money out of all of them is one semester of small engine repair its fucking crazy how much they want for a basic service on a lawnmower or snow blower its over 100 bucks just to clean the carb replace the sparkplug and lube a few things.
I am as well. I took all of the ag classes as well. I took the tractor restoration one and the ag structures (we would build round bale feeders and troughs). I have improved on my welding skills a lot. The teacher said I am a better welder than him on a mig welder. One of the hardest welding methods to get used to is tig welding. The one we use has a foot pedal to control the amount of heat.
I took an automotive class in high school, which they don’t offer anymore. Just wish at that time I took things serious. I was to busy goofing off. I guess now I am paying the price.
They don’t have one here.
Very nice. It good to see a steel body and not fiberglass.
It’s good to have welding skills because if you ever need a job you will always have something to fall back on.
There is one spot where the paint ran ( I did not do that ). We had a kid catch his pant leg on fire today but he was ok it just singed the pants a little.
Here is what it looks like now. I guess next is to start on the interior.
Cool. I’m sure your just inching to finish it and drive it.
I am but it is still a good ways off. I still needs the firewall and frame painted, the interior, engine and transmission, and the front and rear end need work done on both but that won’t take too long, and we still need to put the tonneau cover on the bed. My dad and I are going to rebuild the engine and transmission (turbo 400, for those who don’t know what that is it is a gm 3 speed auto used in their trucks and bigger cars.) I bet we will have it done by prom (late April I think). Last year I drove his 64 Corvette to prom and we had a few issues with it but we got it done one hour before it started. That was the first time it had been driven since the previous October so a few hiccups were expected.
Great looking project. Can’t wait to see the progress!
We are working on putting the cover on the bed and straightening the tailgate now.
Today we drilled the holes in the bed for the snaps to put the cover on. The guy doing the cover is supposed to bring it by Saturday (weather permitting. They are calling for 6 or so inches of snow by Friday.).
Ughh that evil 4 letter word snow :/ I have a bad ass snow blower but I still don’t like dealing with it.
6 inches. Ugh
I’m ready for a good snow.
I can handle the snow so long as there is no ice. That ice is mean stuff.
Well we got out of school at 11 and there is already an inch of sleet.
Man I wish I had those skills to take on a project like this
I am a huge perfectionist as well so that is both good and bad.
The bodywork takes a lot of time. It took him a good two years to get it to where it was before we primed it. Also over the years I have realized how much construction and automotive work have in common. There is wiring, plumbing (fuel, brakes, ect.) and more (that is all I can think of now).
We finally got the cover and the tailgate is now painted.
Cool. Looking forward to seeing it all together.
Harold Wray wrote:
Cool. Looking forward to seeing it all together.
+1
You guys aren’t the only one.
Can’t wait to see some pics
I forgot to take any last time I was out there. I will probably be out there tomorrow since there is no school again (we have had the whole week off and we are supposed to get 3 or so inches of snow Saturday). My grandpa finally got the red paint the other day. I think we are going to put down the aluminum insulation in the cab next.
Here is the bed now
Looking good. Keep us posted
I will try. I left early today because the weather was getting a little icy.
It’s coming along nicely
Other than the one corner on the cover it fit perfectly. We have started on the interior now. That reminds me does anyone know of a good jigsaw blade for aluminum under 1/8 inch.
We didn’t get much done on it today because we had to get a transfer case for his truck. We got back around 1:30. We are finally having school after the big snowstorm. It is supposed to be around 50 all this week.
I’m glad it doesn’t snow here but it would be nice if I could experience snow just to see it.
It gets really old really quick.
I’m always excited about the first 2 or 3 snowfalls of the year. After that, it just gets tiring.
This was the first one. I don’t mind it if there is just a couple inches which is what we usually get but after that is is just a hassle.
Im ready for a 70 degree winter hahaha! Damn thats a nice project you got going, I will have to start one, i bought the power stroke, hoping to repaint it bye the end of january, doing it all my self. I have always likes the 75-78 ford f250 ranger “high Boys” as they called them, make a great 4 wheel drive.
I wouldn’t get your hopes up on the end of January thing because it takes a good while to do all of it. If it is a rust free truck it could be done but I would say by the end of February since it is just you and since you have school and such. The paint brand I would go with would be DuPont. Yes it is expensive but it will be worth it in the end. It will last 20+ years if you take care of it. I would definitely price the paint before you get started. I’m not trying to talk you out of it, I’m just saying it is more time consuming than most people think.
