kc tool co deal of the day

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPhone using Tapatalk

BMack37 wrote:

12 hours ago, BMack37 said:

 

That’s crazy, they don’t mind being sold by one of your much smaller competitors but wouldn’t work with you.

 

For the record, I like Knipex more.

C’est la vie. Ball is in their court.

JimboS1ice wrote:

1 hour ago, JimboS1ice said:

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPhone using Tapatalk

I have this little ratchet, it’s fantastic. You can get the ratchet to…ratchet just by pushing on the black spot on the head so the backdrag is virtually zero. Keep in mind this is probably smaller than you’d imagine, this is for tight spots, it’s smaller than a stubby ratchet.

BMack37 wrote:

11 minutes ago, BMack37 said:

 

I have this little ratchet, it’s fantastic. You can get the ratchet to…ratchet just by pushing on the black spot on the head so the backdrag is virtually zero. Keep in mind this is probably smaller than you’d imagine, this is for tight spots, it’s smaller than a stubby ratchet.

I have the Wiha variant of this ratchet, that one isn’t bad either, I’d pick this up but don’t really need two

JimboS1ice wrote:

3 minutes ago, JimboS1ice said:

 

I have the Wiha variant of this ratchet, that one isn’t bad either, I’d pick this up but don’t really need two

This is probably what @JimboS1ice is referring to. It is actually the one I have. I do prefer the Felo because of the angled head. As @BMack37 said it is very small. I almost forget how small they are until we have a special on one.

https://www.kctoolco.com/wiha-38060-mini-bit-ratchet-and-clicfix-set-with-phillips-2/

BMack37 wrote:

11 hours ago, BMack37 said:

 

I have this little ratchet, it’s fantastic. You can get the ratchet to…ratchet just by pushing on the black spot on the head so the backdrag is virtually zero. Keep in mind this is probably smaller than you’d imagine, this is for tight spots, it’s smaller than a stubby ratchet.

How’s it hold up to torque?  Just had my el cheapo husky slip on a tough bolt today so I think it’s a sign.

jeffmcmillan wrote:

2 hours ago, jeffmcmillan said:

How’s it hold up to torque?  Just had my el cheapo husky slip on a tough bolt today so I think it’s a sign.

 

It’s really small, so I don’t imagine you can get more than a lbs of torque on it.

[External image (i.imgur.com), not copied]

[External image (i.imgur.com), not copied]

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

ChrisK wrote:

And here is one of them![External image (uploads.tapatalk-cdn.com), not copied][External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPhone using Tapatalk

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

jeffmcmillan wrote:

On 11/11/2016 at 10:29 PM, jeffmcmillan said:

How’s it hold up to torque?  Just had my el cheapo husky slip on a tough bolt today so I think it’s a sign.

 

It is a beast. 575 inch lbs or approximately 47 foot lbs of torque. 

[External image (uploads.tapatalk-cdn.com), not copied] Made my first of what I’m sure is to be many KC Tool orders today. Grabbed these guys and a couple other random things. I realized I’m just a sucker for a sets of bits.

Sent from my SM-N900V using Tapatalk

KC_Tool wrote:

19 hours ago, KC_Tool said:

It is a beast. 575 inch lbs or approximately 47 foot lbs of torque. 

I knew better and I knew you had to be right but I really couldn’t believe this number so I broke out the Felo catalog and damned it wasn’t a typo or mistake, holy hell. 65Nm!

kruton wrote:

2 hours ago, kruton said:

[External image (uploads.tapatalk-cdn.com), not copied] Made my first of what I’m sure is to be many KC Tool orders today. Grabbed these guys and a couple other random things. I realized I’m just a sucker for a sets of bits.

Sent from my SM-N900V using Tapatalk
 

 

It’s worth it for the bit holder itself. If it’s the same one I have, it’s a beast. Mine will magnetize a 3″ bit…most barely can magnetize a 1″ bit. 

BMack37 wrote:

51 minutes ago, BMack37 said:

 

I knew better and I knew you had to be right but I really couldn’t believe this number so I broke out the Felo catalog and damned it wasn’t a typo or mistake, holy hell. 65Nm!

It is ridiculous. I couldn’t believe it when i looked it up. I have the wiha myself but the felo is flat better.

BMack37 wrote:

50 minutes ago, BMack37 said:

 

It’s worth it for the bit holder itself. If it’s the same one I have, it’s a beast. Mine will magnetize a 3″ bit…most barely can magnetize a 1″ bit. 

Heck yeah it is. It is a sweet little set. I bought it myself.

Little off topic…but a kick ass wera mug is up for give away on our IG account. kc_tool check us out.

KC_Tool wrote:

Little off topic…but a kick ass wera mug is up for give away on our IG account. kc_tool check us out.

 

 

Dude…I’m there!

Sent from my SM-N900V using Tapatalk

@KC_Tool I just remembered that Felo’s pliers are/were made by NWS, that might be a way to side step the NWS thing…though I’m not sure how well they would sell because not a lot would know the OEM and there’s limited options.

[External image (uploads.tapatalk-cdn.com), not copied]

I have this set I love these keys


Sent from my iPad using Tapatalk

BMack37 wrote:

7 hours ago, BMack37 said:

@KC_Tool I just remembered that Felo’s pliers are/were made by NWS, that might be a way to side step the NWS thing…though I’m not sure how well they would sell because not a lot would know the OEM and there’s limited options.

Yeah that does sound right. I think Orbis also used to make them for Felo. The problem is Felo has discontinued their pliers division. They are still on their website and maybe even in the print catalog but they aren’t selling them going forward. We have tried to get their remaining stock exported out of Germany but they are holding on to them. Maybe trying to turn them into collectors items like beanie babies, furbys, pokemon cards… 

KC_Tool wrote:

Yeah that does sound right. I think Orbis also used to make them for Felo. The problem is Felo has discontinued their pliers division. They are still on their website and maybe even in the print catalog but they aren’t selling them going forward. We have tried to get their remaining stock exported out of Germany but they are holding on to them. Maybe trying to turn them into collectors items like beanie babies, furbys, pokemon cards… 

KC_Tool wrote:

10 hours ago, KC_Tool said:

Yeah that does sound right. I think Orbis also used to make them for Felo. The problem is Felo has discontinued their pliers division. They are still on their website and maybe even in the print catalog but they aren’t selling them going forward. We have tried to get their remaining stock exported out of Germany but they are holding on to them. Maybe trying to turn them into collectors items like beanie babies, furbys, pokemon cards… 

Weird, I thought it was odd that the pliers catalog was separate from the main catalog. I liked the look of their pliers over the crazy NWS grips.

Just in case anyone doubts KC’s great prices, Snap-on attempted to sell me a pair of knipex pliers for $130 today.

In case you didn’t see

Does the TIA code stack?

Nope

KnarlyCarl wrote:

1 hour ago, KnarlyCarl said:

Does the TIA code stack?

Like where your head is at but the 20% off plus the 10% would make my kids go hungry on the holidays. 🙂

Besides the promotion for the Wera, Felo, Wiha, and Gedore items are probably the best you will find anywhere…ever.

The Gedore item is freaking ridiculous. The deal they shot us on them was amazing (70% off). This is actually what Im giving as a Christmas present to my dad.

https://www.kctoolco.com/black-friday/

Call me a sucker for a 20% off deal. Just placed my first order with KC. Get to relegate all my old smelly craftsman screwdrivers to some dark corner now.

JMG wrote:

17 minutes ago, JMG said:

Call me a sucker for a 20% off deal. Just placed my first order with KC. Get to relegate all my old smelly craftsman screwdrivers to some dark corner now.

You won’t be disappointed!

Crikey, @KC_Tool Have to leave your website before I start replacing all my hand tools. Found several items I missed on the first order and…

You can combine the two orders if it saves you on shipping.

JMG wrote:

25 minutes ago, JMG said:

Crikey, @KC_Tool Have to leave your website before I start replacing all my hand tools. Found several items I missed on the first order and…

 

You can combine the two orders if it saves you on shipping.

You got it. Do you mind PM’ing me to let me know your order #s? It would saving me digging through the pile. Ill swag you out too for your trouble.

I’m torn between these two diagonal cutters;

https://www.kctoolco.com/knipex-73-72-180-7-twinforce-diagonal-super-cutter-comfort-grip/

https://www.kctoolco.com/knipex-73-06-160-6-3-x-cut-diagonal-cutter-insulated/

Any thoughts/opinions? Aside from “Both!” ; )

@KC_Tool?

wildroamer wrote:

7 minutes ago, wildroamer said:

I’m torn between these two diagonal cutters;

 

https://www.kctoolco.com/knipex-73-72-180-7-twinforce-diagonal-super-cutter-comfort-grip/

 

https://www.kctoolco.com/knipex-73-06-160-6-3-x-cut-diagonal-cutter-insulated/

 

Any thoughts/opinions? Aside from “Both!” ; )

 

@KC_Tool?

Vote for the twinforce…. unless you really need the insulation.. i just find that gets in the way sometimes…..

Foneguy wrote:

1 minute ago, Foneguy said:

Vote for the twinforce…. unless you really need the insulation.. i just find that gets in the way sometimes…..

I agree. It really comes down to the difference if you need the insulation. If you need it…you need it. But if you don’t the twinforce hinge is fantastic and is a superior tool because of it.

JMG wrote:

22 hours ago, JMG said:

Call me a sucker for a 20% off deal. Just placed my first order with KC. Get to relegate all my old smelly craftsman screwdrivers to some dark corner now.

HAH !! …. i have been doing the same thing !!!!! Just havent decided which set to get

wildroamer wrote:

7 hours ago, wildroamer said:

I’m torn between these two diagonal cutters;

 

https://www.kctoolco.com/knipex-73-72-180-7-twinforce-diagonal-super-cutter-comfort-grip/

 

https://www.kctoolco.com/knipex-73-06-160-6-3-x-cut-diagonal-cutter-insulated/

 

Any thoughts/opinions? Aside from “Both!” ; )

 

@KC_Tool?

Agreed with the other two. Honestly, I think the box joint cutters aren’t necessary and thus not worth the premium. Twin force has a mechanical advantage over the high leverage cutters so the premium has value.

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

Son of a bitch!

I Just bought those exact knipex crimpers AND those wera torx L keys last week and paid WAY more than that

I think i need these keys

plumbfitter wrote:

15 hours ago, plumbfitter said:

Son of a bitch!

 

I Just bought those exact knipex crimpers AND those wera torx L keys last week and paid WAY more than that

PM me @plumbfitter. We can probably do something.

[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

if I didn’t have my witte/napa drivers id pick up the wiha set. became a wiha  whore with my last order. really liking the handles..

rrich1 wrote:

if I didn’t have my witte/napa drivers id pick up the wiha set. became a wiha  whore with my last order. really liking the handles..

JimboS1ice wrote:

1 minute ago, JimboS1ice said:

Yea dude they are nice drivers, in the least you should pick up the 2 PC set that has the measuring lines laser etched on


Sent from my iPhone using Tapatalk

link? haven’t seen those

rrich1 wrote:

link? haven’t seen those

JimboS1ice wrote:

11 minutes ago, JimboS1ice said:

https://www.kctoolco.com/wiha-31194-2-5-5mm-2-piece-measureup-slotted-phillips-screwdriver-set/


Sent from my iPhone using Tapatalk

Suddenly I’m sitting her wondering why all screwdrivers don’t have measurements stamped on.  It would be really useful.

jeffmcmillan wrote:

Suddenly I’m sitting her wondering why all screwdrivers don’t have measurements stamped on.  It would be really useful.