Running List for Dewalt Tool @ TOUGHINSOUTH Event

Title says it all… I’m working on the list and links to everyones post, if I’m missing some stuff I probably haven’t gotten to it yet just let me know

https://thejimbosliceworkshop.com/2017/08/18/getting-touger-in-the-south-dewalt-releases-its-next-batch/

Log in to see what? 

What username?

oh

framer wrote:

45 minutes ago, framer said:

Log in to see what? 

Framer joe wrote:

43 minutes ago, Framer joe said:

What username?

sorry let me change the link thats my log in to edit try it now

Miters saws have a rafter hook????

Thank you jimbo …your the best

I think you forgot  the new metal snips

Pouet wrote:

2 minutes ago, Pouet said:

I think you forgot  the new metal snips

Thanks, still sifting through everything some stuff thats has been out a little while i havent included like the track saw

@JimboS1ice Gen 3 framing nailers and 4 lb hammer

Gen 3  framing nailer ?

Framer joe wrote:

1 minute ago, Framer joe said:

Gen 3  framing nailer ?

yeah dewalt canada said they are coming out in September

also does the new 2 in sds have a hollow core chisel???

also there is now a van specific tough system rack. looks like it has metal horizontal bracing now.

looks like the total new grinders is 15

Hey @Jronman if you get any info on the new framing nailers let me know please, …

I wonder what the tool behind the sds is? a comment thought maybe a 2k caulking gun? I wonder if the power station is connected to the vac.

Framer joe wrote:

2 minutes ago, Framer joe said:

Hey @Jronman if you get any info on the new framing nailers let me know please, …

I’m just trying to catch up on my instagram feed after coming home from work haha. I will see if I find anything else. I’m not even sure if they are 20v or air. Seen no pictures or any other info so far. Also looks like the new osha compliant sds with vac has a filter cleaning feature.

That looks like a 2 part epoxy driver to me, which is really sweet considering how viscous epoxy is…pumping that shit out for a few hours on end have you feeling like Arnold Schwarzenegger. 

the new mid torque has 350 foot pounds. Also appears as though the 20v drain snake has the 3 mode 60 lumen light.

appears to be a new dust shroud thingy that suctions to the concrete.

cordless heater? top shelf picture 4

That’s actually not new 

Jronman wrote:

4 minutes ago, Jronman said:

appears to be a new dust shroud thingy that suctions to the concrete.

 

 

Nah that’s been out for a while now. http://www.dewalt.com/products/power-tools/dust-management/dust-extractors-and-vacs/large-hammer-dust-extraction–hole-cleaning/dwh050k

Jronman wrote:

4 minutes ago, Jronman said:

cordless heater? top shelf picture 4

 

 

Clearly flexvolt designed by the gaping hole underneath, could be. I have a hard time understanding why they have all these other tools that they didn’t even mention in the event? They just prototypes to future working tools or what? 

not sure @Hugh Jass

Also sounds like it might be an epoxy gun to go with the 1-7/8 sds which also has bind control. new under lid storage and powertool trays for toughbox

The 3 drawer does look nice. Also like the small LDM and the quick setup work table.

Sent from my SM-G920V using Tapatalk

huh. really branching out!! Storage racking, and coolers…. hmm, should be interesting.

As they say, with all this competition, we all win! Except for my wallet …:(

need more info on the gen3 nailer!

Gen3 nailer so we are admitting Gen2 just isn’t up to Par.

I will sell my Gen2 for 100 bucks any takers lol?

Nobody has said anything about it being cordless. What would have been the Gen 1 framing nailer? 

That mid torque impact has my name all over it. Good job @JimboS1ice

Hugh Jass wrote:

51 minutes ago, Hugh Jass said:

Nobody has said anything about it being cordless. What would have been the Gen 1 framing nailer? 

The single speed one I am guessing, I have the 2 and still love it.

We’ll see how improved it is before I decide whether I’m interested or not. 

Dewalt DCN690 gen one perhaps and DCN692 gen two?  I would give you 100 for a dcn692 not trashed

maybe gen 1 is the nicd cordless nailer and the gen 2 the 20v max?

Jronman wrote:

2 hours ago, Jronman said:

maybe gen 1 is the nicd cordless nailer and the gen 2 the 20v max?

They’re both 20v, one is single two is double.

690 Single Speed Framing Nailer

692 Dual Speed Framing Nailer

693 Framing nailer that Works

I didn’t even know there was a 690, lol. 

JakeDewalt wrote:

2 hours ago, JakeDewalt said:

690 Single Speed Framing Nailer

692 Dual Speed Framing Nailer

693 Framing nailer that Works

so the metal connector nailer and framing are the same nailer?

Jronman wrote:

19 minutes ago, Jronman said:

so the metal connector nailer and framing are the same nailer?

No

the metal connector nailer is a separate gun and you can tell it by the narrow extended black tip used for placing the nail.

I think the mid torque will be in my truck also…….and yes 690 was first then 692 two speed , ,and the 693 is a metal connector. (Hanger gun)……dewal pneumatic guns are highly rated,  the roofing gun is the fastest around,,the precision point nailers are excellent…the siding gun is fast and durable,,,never used there framing gun.( we use bostich and hatachi framing guns,,wire ) 

Framer joe wrote:

I think the mid torque will be in my truck also…….and yes 690 was first then 692 two speed , ,and the 693 is a metal connector. (Hanger gun)……dewal pneumatic guns are highly rated,  the roofing gun is the fastest around,,the precision point nailers are excellent…the siding gun is fast and durable,,,never used there framing gun.( we use bostich and hatachi framing guns,,wire ) 

Ya,  @JimboS1ice I think it will do the job setting lags for the deck ledger …my 899 is overkill…..I hope so ,never used a mid torque……..also do you own the Milwaukee 1/4,3/8,1/2″ wrenches , they have like 40 lbs torque ….Dewalt doesn’t have those and I m thinking about getting the newer ones 

Framer joe wrote:

Ya,  [mention=51951]JimboS1ice[/mention] I think it will do the job setting lags for the deck ledger …my 899 is overkill…..I hope so ,never used a mid torque……..also do you own the Milwaukee 1/4,3/8,1/2″ wrenches , they have like 40 lbs torque ….Dewalt doesn’t have those and I m thinking about getting the newer ones 

I just don’t think you can beat Hitachi when it comes to Coil guns

Thanks @JimboS1ice…ya I think the Dewalt mid will do it….and I like those new Fuel ratchets too……cmon Dewalt………btw nice show

They have some cool stuff, can tell their direction is with the perform and protect tools, I was hoping to see some new flex volt stuff but all they really showed was the compressor, track saw and framing saw? What happened to the massive FV release?

Ya….the guys on here warned me that the Dewalt shows can be lame….I had high hopes because my first show was last years…….I thought the event didn’t look professional…the set up, the stations, …last years event looked and felt PRO …seems like Dewalt rested when they should have gone for the jugular….ya some guns ,blah blah….they should have had Big ticket items …massive Flexvolt unavailing….10″ mitre,  vacuums,, table saw, adapters, etc..

     I’m very disappointed….the fan won’t help, now that summer is over, same for the cooler…the heater on the shelf ,can’t heat me by sitting on the shelf…….nothing there’ to help my company make money, work more efficiently, save time……..makes you wanna go Red…..NO!  Joking…but I wish it was much bettter

JakeDewalt wrote:

4 hours ago, JakeDewalt said:

No

the metal connector nailer is a separate gun and you can tell it by the narrow extended black tip used for placing the nail.

 

 

I was just wondering because the metal nailer’s model number is dcn693

Framer joe wrote:

3 hours ago, Framer joe said:

Thanks @JimboS1ice…ya I think the Dewalt mid will do it….and I like those new Fuel ratchets too……cmon Dewalt………btw nice show

they had rachets….required hand power though haha

JimboS1ice wrote:

2 hours ago, JimboS1ice said:

They have some cool stuff, can tell their direction is with the perform and protect tools, I was hoping to see some new flex volt stuff but all they really showed was the compressor, track saw and framing saw? What happened to the massive FV release?

the flex mixer was neat. I suspect more of a flexvolt emphasis at the GIE expo if that is still a thing and if DeWALT is going or whatever events DeWALT will be going to later this year if any.