M12 3/8″ Ratchet

Archived from the Tools In Action forum (Milwaukee). This thread is read-only.

JimboS1iceMember since Sep 2015

 

 

This ones for mondo!

Enjoy

JimboS1iceMember since Sep 2015

PROTOOLNUT wrote:

3/4 drive ratchet, I didn’t even know they made one with such a huge anvil! And you actually got 3/4 drive sockets, who knew! Well I guess you knew, we just didn’t haha. Looks like its working real nicely. Question, whats with all the lights in your vehicle?

 

Don’t strip your screw Jimbo, its not as fun as it looks. And impact wrenches and ratchets are always rated in 35 foot pounds, otherwise you wouldn’t get anything done lol. Nice video Jimbo, thanks for sharing a little awesomeness with the crew on a Sunday morning.

Did I say 3/4 on video?

krutonMember since Jun 2015

Nice video as always bro. This ratchet is the one M12 tool I would really like to have.

Sent from my SM-N900V using Tapatalk

JimboS1iceMember since Sep 2015

PROTOOLNUT wrote:

3/4 drive ratchet, I didn’t even know they made one with such a huge anvil! And you actually got 3/4 drive sockets, who knew! Well I guess you knew, we just didn’t haha. Looks like its working real nicely. Question, whats with all the lights in your vehicle?

 

Don’t strip your screw Jimbo, its not as fun as it looks. And impact wrenches and ratchets are always rated in 35 foot pounds, otherwise you wouldn’t get anything done lol. Nice video Jimbo, thanks for sharing a little awesomeness with the crew on a Sunday morning.

Ha ha whoops!!!

unclebudMember since Dec 2015

Nice video Jimbo. I have had my M12 ratchet for a couple of months now, it gets used everyday at work. I like it.

Mondo1310Member since Jun 2015

Great video Jimbo!!! I noticed if you put the xc pack on it get a bit more power. Is that GearWrench kit all 1/4 drive? 

John GlasseyMember since Jan 2014

Haha good catch Protool. He is very attentive. It’s ok Jimbo, we all know it’s a 3/8″ still a great video on a great tool!  

JimboS1iceMember since Sep 2015

Mondo1310 wrote:

Great video Jimbo!!! I noticed if you put the xc pack on it get a bit more power. Is that GearWrench kit all 1/4 drive? 

No it’s about half and half, but the more common stuff is in 1/4″ that’s a 2.0 pack, usually for videos whatever I grab first is what I use lol

JimboS1iceMember since Sep 2015

PROTOOLNUT wrote:

I am a good listener and I listen to what people say to me. And yes I caught you in a mistake but I rather laugh about it with you then be negative over it. I am thinking that is going to be a rare tool for you, like the one you grab maybe once per year, but then again you never know.

 

As long as you enjoy it, thats what matters. [emoji6]

Having the Gearwrench bits makes it far more versitile

KnarlyCarlMember since Jan 2016

JimboS1ice wrote:

7 hours ago, JimboS1ice said:

Did I say 3/4 on video?

Yeah, we knew what you meant. You have a lot of things to keep track of, making sure the tool is in the camera view, holding it so we can see it, all that.. You have said things before like this, then caught yourself and corrected, but this time you didn’t catch it! Oh well, maybe go back and edit in some text so you don’t have to go to extra work of patching in a new scene?

Also, those gearwrench sockets are looking real attractive, Kato really did a good job with that, but you coupling them with the m12 ratchet must have been the final touch, because they just…. spoke to me lol

My m12 ratchet gets used a lot, and it’s filthy LOL but i have some good wipes i like using on it to shine it back up

Mondo1310Member since Jun 2015

Why did you take down red lights for?

KnarlyCarlMember since Jan 2016

Mondo1310 wrote:

11 minutes ago, Mondo1310 said:

Why did you take down red lights for?

??

I had blue lights in my car for firefighter response but I don’t really use them too much

 

Was there red lights too?

JimboS1iceMember since Sep 2015

KnarlyCarl wrote:

??

Jimbos1ice

I had blue lights in my car for firefighter response but I don’t really use them too much  

Was there red lights too?

No Illinois for personal vehicles is blue and white only

Mondo1310Member since Jun 2015

JimboS1ice wrote:

12 minutes ago, JimboS1ice said:

No Illinois for personal vehicles is blue and white only

Oh ok. Here in Texas it’s red and white. 

JimboS1iceMember since Sep 2015

Mondo1310 wrote:

Oh ok. Here in Texas it’s red and white. 

Yea each state usually has its own laws, some states you can even run sirens, Illinois is blue blue or blue white for personal fire, to run read you have to have a special letter in your vehicle at all times.

BigmikezMember since Jun 2013

Great video Jimbo! I seen it earlier on utube bro great job!

JimboS1iceMember since Sep 2015

PROTOOLNUT wrote:

Or you could follow my law, which actually makes fu*** sense! Blue for police and RED for fire, and yellow for utility, and let ambulances use white.

 

Use GREEN of you want to be seen. Use ORANGE if you want to let the world know that you were glad you weren’t born a banana. Use BROWN if you work for sanitation and your flushing it down.

 

Use PINK if your a panther on the prowl, use Purple if you love to give nirples. Use a mix of GREEN and BLUE if your making your runs for OSHA’s safety police.

 

 

If only life were that simple

Mattias BlomqvistMember since Apr 2015

JimboS1ice wrote:

 

 

This ones for mondo!

Enjoy

Aah another hole in the wallet, found it on sale yesterday and couldn’t resist. So far it looks like a damned good tool. I was happy that I could fit a set of short sockets as well as a set of deep sockets in the soft case along with the tool and charger [emoji106]

Skickat från min SGP511 via Tapatalk

Mattias BlomqvistMember since Apr 2015

PROTOOLNUT wrote:

I see that Jimbo helped you to save, I mean, spend your money, he tends to do that. [emoji6][emoji6]

Something like that protoolnut [emoji12]

Skickat från min LG-H815 via Tapatalk

KnarlyCarlMember since Jan 2016

Mattias Blomqvist wrote:

4 hours ago, Mattias Blomqvist said:

Aah another hole in the wallet, found it on sale yesterday and couldn’t resist. So far it looks like a damned good tool. I was happy that I could fit a set of short sockets as well as a set of deep sockets in the soft case along with the tool and charger emoji106.png

Skickat från min SGP511 via Tapatalk

Yah funny how that works. Lately i’ve noticed I haven’t been buying as much… then I realized I’ve not really been keeping up with the forums as much ahaha

You are the influencer. Post it to 4.4 million followers.

Hit record. We’ll handle the rest.

Upload your review