Archived from the Tools In Action forum (Tool Deals). This thread is read-only.
Thought I shared this before but didn’t see it. The 3/8″ set comes with the 84-tooth ratchets, the 1/4″ set comes with the 120xp ratchet and the thumb ratchet. Each set normally sells for $90-120, get both sets for $104. Includes standard and deep sockets, metric and SAE, all sockets are 6-point. Made in Taiwan, very high quality sets.
http://www.ntxtools.com/network-tool-warehouse/KDT-80550F.html
Wish I needed them.
Millerz
Millerzconstruction wrote:
8 minutes ago, Millerzconstruction said:Wish I needed them.
Millerz
I’m sort of in the same boat. I don’t need the ratchets but could use the 1/4″(more complete set than I have at home), the 3/8″ are lesser quality than the set I have. I also need a 1/2″ set. I’m actually going to wait for the Toptul sockets to come back in stock, his sets are 1/4″, 3/8″ and 1/2″ on rails with no ratchets. That makes it easier for me to store and the quality seems to be better than Gearwrench. $46 for the standard sockets(39 piece metric, haven’t received a quote for SAE yet) is rather good considering it has 1/2″…not quite the same low price so I’m still tempted.
BTW, if any of you want pics of either the Gearwrench or Toptul, I don’t mind stealing other’s pics haha(I will share their screen name). Also can give you the Toptul distributor.
Pretty tempting deal Bmack if I didn’t just by all that proto and knipex
Jimbo
Sent from my iPhone using Tapatalk
haha, oops
If I had gotten paid with direct deposit I would have bought this already, but I only have cash so, luckily, I can let this one pass. There is always next time.
Stercorarius wrote:
1 hour ago, Stercorarius said:If I had gotten paid with direct deposit I would have bought this already, but I only have cash so, luckily, I can let this one pass. There is always next time.
It’s available from a few sites for a little bit more, I recall seeing it last year…so maybe it will still be around when, if you decide you want to bite, later down the road.
There are also other Gearwrench promo sets, none are even close to this. They’re buy a sockets + rail and get a sockets + rail deal, it’s not buy SAE and get Metric, it’s buy a SAE get a different style of SAE sockets for free.
This is still available btw 🙂
Forgot about these. Been looking for a portable set and these look like they’ll fit the bill.
Stopped in my local Sears today, was eying up the Gear Wrench Sets but could not pull the trigger…..
I think I’ll wait for Fathers Day to grab them on sale…
MikeyB wrote:
2 hours ago, MikeyB said:Stopped in my local Sears today, was eying up the Gear Wrench Sets but could not pull the trigger…..
I think I’ll wait for Fathers Day to grab them on sale…
Which sets were you looking at?
They had a couple there BMack, ranging from $60-$150.
i will definitly head back around Fathers Day. The $60 dollar set of metric and sae looked good,
I’ve never seen Sears stock the socket sets in-store, my stores only sell Craftsman socket sets. They have Gearwrench combination wrenches and some roto ratchets only. 🙁
Use code N05 at checkout for five dollars off.
Socket promo set is still available, code still works and I found this:
Gearwrench KDT-81907 6pc Flare Nut Wrench Set SAE + KDT-81906 6pc Flare Nut Wrench Set Metric for $39.55
http://www.ntxtools.com/network-tool-warehouse/KDT-81907D.html
If you have a Geardriver or are considering one, buy this. It’s a 1/4″ square female on both ends, this allows you to use your Geardriver extensions with a regular ratchet(You’ll also need a regular ratchet extension, preferably 2″). Everywhere else this is going to cost about $8: http://www.ntxtools.com/network-tool-warehouse/KDT-890007GD.html
Man if I didn’t already have a full arsenal of proto flare wrenches I’d be all over that. #humblebrag
Stercorarius wrote:
1 hour ago, Stercorarius said:Man if I didn’t already have a full arsenal of proto flare wrenches I’d be all over that. #humblebrag
#Jealous
Deal is still live plus a ten dollar price drop. Best set out there for this price.