It looks like I will have to work some overtime to get these.
Next question is do these come with the small parts organizers as a hard case? Or do they even fit?
JerryNY wrote:
Makes me happy if true, and smart of Milwaukee if it’s a pin. You figure lots of peeps have brad, finish nailers from Ryobi and Dewalt so coming out with a pin nailed might be smart as only Makita is making a cordless one I think. I’d be happy to add a fuel pin nailer to my ryobi Brad nailer.
Porter Cable also has a cordless pin nailer.
I haven’t come across a porter cable pin nailer. I’ve seen their Brad and crown nailers but not the pin.
Link?
Wow I cant wait till they are in America. I will be getting them.
New guy! What’s up Travis?
Sent from my SCH-I535 using Tapatalk
More teaser pics of m18 FUEL Nailers!!!
[External image (i64.tinypic.com), not copied]
[External image (i65.tinypic.com), not copied]
Sources say these photos are from a Milwaukee tool release in Prauge
Let’s hope US sooner than later!!!
Who else on here literally needs these???
Look at that angled finishing nailer
Jimbo
Sent from my iPhone using Tapatalk
The nailers are due for release in Europe around August. Not sure about the US release date but no doubt they will be announced at the usual symposium around June/July.
Those are some seriously sick liking nailers.
Sent from my iPhone using Tapatalk
Excuse my while I go change my boxers! Seriously though, some Russian needs to post a video!
Saves space maybe, makes it look quite a bit smallerJimbos1ice wrote:
Look at that angled finishing nailer
Jimbo
Sent from my iPhone using Tapatalk
KnarlyCarl wrote:
Saves space maybe, makes it look quite a bit smaller
Very small body
Jimbo
Sent from my iPhone using Tapatalk
Assuming they work well, who do i give my money to?
Nice of u to let them photograph your nailer.
Wow, we looking at an18g Brad and 16g angled finisher? Both look more compact than any other battery powered nailer and getting close to pneumatics external dimensions…
JerryNY wrote:
Wow, we looking at an18g Brad and 16g angled finisher? Both look more compact than any other battery powered nailer and getting close to pneumatics external dimensions…
Probably 15g, never seen 16g angled
Jimbo
Sent from my iPhone using Tapatalk
Very good point jimbo, but Milwaukee could be the first. They are always changing things up.
Leave it to milwaukee to up the game again! Thanks for posting more pics!
I’d sure like to try one….
comp56 wrote:
I’d sure like to try one….
Just one?
Jimbo
Sent from my iPhone using Tapatalk
Jimbos1ice wrote:
Probably 15g, never seen 16g angled
Jimbo
Sent from my iPhone using Tapatalk
Oh yeah I meant 15g. Probably wouldn’t make sense being the only 16g angled, nails would be hard to come by.
JerryNY wrote:
Oh yeah I meant 15g. Probably wouldn’t make sense being the only 16g angled, nails would be hard to come by.
Paslode has an angled 16g nailer as well, so 16g is a possibility
why so secretive Milwaukee????
Taylors Tools wrote:
Paslode has an angled 16g nailer as well, so 16g is a possibility
Nails would be hard to come by
Jimbo
Sent from my iPhone using Tapatalk
Isn’t the new dewalt angle finish nailer a 16ga?
Sent from my iPhone using Tapatalk
Jimbos1ice wrote:
Nails would be hard to come by
Jimbo
Sent from my iPhone using Tapatalk
DarynH wrote:
Isn’t the new dewalt angle finish nailer a 16ga?
Sent from my iPhone using Tapatalk
Yea I think it is…
Jimbo
Sent from my iPhone using Tapatalk
Jimbos1ice wrote:
Nails would be hard to come by
Jimbo
Sent from my iPhone using Tapatalk
16 gauge angled is pretty common now I never had a problem getting them because the paslode nailers used that size
[External image (pbs.twimg.com), not copied]
[emoji857]
Jimbo
Sent from my iPhone using Tapatalk
My porta cable is 16g
Millerz
Dewalt DC618 is 16ga angled finish nail gun and the nails are readily available for it. The Dewalt DC628 is a 15ga angled nail gun and uses the same nails as Senco. These are two from the old xrp line.
here is more tease saw this when looking on HD site. Seems to be a couple different version but no true photos.
K.C wrote:
here is more tease saw this when looking on HD site. Seems to be a couple different version but no true photos.
Interesting. I did a search just now on HD and it also shows a pic of a roofing nailer, but none of them look cordless.
Looks like they just put stock pics of their air nailers until they get the real deal in
Sent from my SCH-I535 using Tapatalk
Yea I was going to say those all look like pnumatics
Jimbo
Sent from my iPad using Tapatalk
Cpomilwaukee.com has a category with a nailer as the picture, but when you click it only has 4 items, none of which are the nailers.
K.C wrote:
here is more tease saw this when looking on HD site. Seems to be a couple different version but no true photos.
Price is a little higher than I had hoped. For that price you’d think they would come with a fat pack and not the slims. But I’m sure I’ll end up getting one anyway [emoji12] thanks for the info!
Sent from my iPhone using Tapatalk
Yea, they are just stock photos of old discontinued Milwaukee pneumatic nailers. The Milwaukee pneumatic nail guns didn’t last long.
So what are we thinking the price is gunna be?? And are these verified prices or speculation??
Even if the bare tools are $100 cheaper, that’s still a lot of $$$$$ if those end up being the real prices.
that seems insane but like everything else if that is the price they will sell them……
The Dewalt 20v nailer is around $299
Jasonc wrote:
The Dewalt 20v nailer is around $299
It’s $399 (although cheaper with something like a Zoro 30% off), but it’s also a framing nailer. These finish nailers should be quite a bit cheaper than a framing nailer.
Wow, Dewalt’s site is a mess. Not listed here: http://www.dewalt.com/tool-categories/20v-max-nailers.aspxJasonc wrote:
But is listed here: http://www.dewalt.com/tool-categories/cordless-nailers.aspx
Either way, I’ll still have to wait for the HD $150 promo in November or something equivalent to get one of these.
rocket1420 wrote:
Wow, Dewalt’s site is a mess. Not listed here: http://www.dewalt.com/tool-categories/20v-max-nailers.aspxBut is listed here: http://www.dewalt.com/tool-categories/cordless-nailers.aspx Either way, I’ll still have to wait for the HD $150 promo in November or something equivalent to get one of these.
Yea definitely gunna have to wait for some kind of promo to get one!!
Guess the ole air strike ryobi is gunna have to get me through!! (Lol first world problems)
TTI’s budget line is Ryobi. Next up is Ridgid and on top of the price heap is Milwaukee. You probably ought not to expect that the new Milwaukee Fuel nailers would be cheap.
Milwaukee prices all of their tools higher than a lot of the competition because they knew that people will pay for them, simple as that. Are they worth the price? That’s a personal decision between you and your tool budget, but it’s the same conversation whether your buying Festool green, Dewalt yellow or Woodpecker “shiny OMG I just have to have a $200 square” anodized red.
Sent from my iPhone using Tapatalk
Well said, kdv
Sent from my SCH-I535 using Tapatalk