DeWALT new Toughsystem/TSTAK adapter for their new dust extractor

Archived from the Tools In Action forum (Accessories). This thread is read-only.

AltanMember since Nov 2011

Photo from the original forum

AltanMember since Nov 2011

You can see that the adapter has two yellow plastic latches next to each other on both sides. Unfortunately not an adapter that you can use to connect TSTAK to Toughsystem cases. 

Hugh JassMember since Feb 2015

What is that on top of it?

AltanMember since Nov 2011

Hugh Jass wrote:

13 minutes ago, Hugh Jass said:

What is that on top of it?

Looks like a nail gun to me, concrete nail gun, I know they had/have some with strange batteries.

AltanMember since Nov 2011

DeWALT has new Toughsystem 2.0 cases in yellow colour, I think they have been designed for accessories (bottom right) and next to that you can see Toughsystem 2.0 DS100 with another one with similar size with side handles. Also they have added side handles to almost all new toolboxes. You can see a Toughsystem cooler(?) in yellow colour with wheels. They have an extra large Wheeled Toughsystem 2.0 (bottom left).

Photo from the original forum

AltanMember since Nov 2011

Toughsystem 2.0 3 Drawers Box

Photo from the original forum

Photo from the original forum

jslskerMember since Jan 2015

Also saw this new box on reddit

 

 

 

AltanMember since Nov 2011

jslsker wrote:

20 hours ago, jslsker said:

Also saw this new box on reddit

 

 

 

I have seen this, too. There are some nice things that are compatible with this.

AltanMember since Nov 2011

Photo from the original forum

AltanMember since Nov 2011

Photo from the original forum

AltanMember since Nov 2011

Photo from the original forum

AltanMember since Nov 2011

Photo from the original forum

AltanMember since Nov 2011

Photo from the original forum

JronmanMember since May 2016

Nice to see DeWALT coming out with more Tough System 2.0 products. They were kinda slow at releasing stuff for OG Tough System. There was a 3 drawer unit in the OG system but it did not make it to the states. Maybe this one will actually make it here. I am kinda disappointed that the DS Carrier isn’t fully compatible with 2.0 since 2.0 removed the locking bracket on the back of the boxes. I think the boxes can still be attached to the carrier but can’t be locked to it. Also there are a few 2.0 boxes not including the half width boxes that do not fit on the brackets for the van/wall/carrier brackets. I might have to pickup one of the 3 drawer units if it comes here. I wonder if the box is the same height as the 2 drawer unit meaning shorter drawers or if the box is taller meaning the same height drawers but 3 of them.

JronmanMember since May 2016

Altan wrote:

On 1/16/2023 at 10:20 AM, Altan said:

DeWALT has new Toughsystem 2.0 cases in yellow colour, I think they have been designed for accessories (bottom right) and next to that you can see Toughsystem 2.0 DS100 with another one with similar size with side handles. Also they have added side handles to almost all new toolboxes. You can see a Toughsystem cooler(?) in yellow colour with wheels. They have an extra large Wheeled Toughsystem 2.0 (bottom left).

Photo from the original forum

I just noticed the big open box middle right has a green ligh on it and a regular color light shining into the box. Also looks like something on each side of the light. Maybe a battery? The yellow case on the right bottom has a different front handle that looks to not hinge.

AltanMember since Nov 2011

Jronman wrote:

On 2/6/2023 at 11:53 PM, Jronman said:

I just noticed the big open box middle right has a green ligh on it and a regular color light shining into the box. Also looks like something on each side of the light. Maybe a battery? The yellow case on the right bottom has a different front handle that looks to not hinge.

Yea, you are right, they are batteries, that is the full size Toughsystem charger, I heard a few weeks ago that it is coming soon also. 

AltanMember since Nov 2011

Jronman wrote:

On 2/6/2023 at 11:48 PM, Jronman said:

Nice to see DeWALT coming out with more Tough System 2.0 products. They were kinda slow at releasing stuff for OG Tough System. There was a 3 drawer unit in the OG system but it did not make it to the states. Maybe this one will actually make it here. I am kinda disappointed that the DS Carrier isn’t fully compatible with 2.0 since 2.0 removed the locking bracket on the back of the boxes. I think the boxes can still be attached to the carrier but can’t be locked to it. Also there are a few 2.0 boxes not including the half width boxes that do not fit on the brackets for the van/wall/carrier brackets. I might have to pickup one of the 3 drawer units if it comes here. I wonder if the box is the same height as the 2 drawer unit meaning shorter drawers or if the box is taller meaning the same height drawers but 3 of them.

In Toughsystem 1.0 two drawer box was DS290 (290mm), and three drawer box was DS295 (295mm) so 5mm difference in height, it might be the same with the new ones. 

You are the influencer. Post it to 4.4 million followers.

Hit record. We’ll handle the rest.

Upload your review