Hope Dewalt has something like this in aug

Makita 10″ cordless,brushless  double bevel..mitre saw with Bluetooth,,auto vacuum when trigger is pulled….XSL06 ….sorry don’t know how to get a screen pic…….Cmon Dewalt 

i like how the rails are more compact.  thats my one gripe with the dewalt 12″ miter saws.  the rails are long and makes the saw a bit big.

[External image (i.imgur.com), not copied]

Hell I’d just like to see a 10″ like the rest of the world gets

[External image (www.dewalt.co.uk), not copied]

Should they go bluetooth route like Makita or go vibration route like Metabo?

Cr8ondt wrote:

1 hour ago, Cr8ondt said:

Hell I’d just like to see a 10″ like the rest of the world gets

 

[External image (www.dewalt.co.uk), not copied]

i just dont understand the appeal of that saw.

I like the dial for degrees up front and so compact….I don’t about if it’s powerful or if that rail set is sturdy but I like the set up on that Makita………the eu Dewalt 10″ a saw a vid on and it’s very interesting…

The 10 is appealing to me, because my 7 1/4″ 20v won’t cut through a 4×4 in one pass- you have to rotate the post twice, for a total of 3 cuts, kind of a pain.


Sent from my iPhone using Tapatalk

the small flexvolt saw is almost a waste of time in my opinion as it only bevels one way. I will never buy a saw that only bevels on way it is to much of a pain you end up cutting things upside down and all sorts

I like the 7 1/4 mitre from Dewalt it’s a nice saw..ya I wish it was dbl bevel ,but still nice…..I am waiting for a 10″ version only because my 7 1/4 cordless won’t cut azek rails which I use every weekend…and the 12″ cordless is big…

Framer joe wrote:

3 hours ago, Framer joe said:

I like the 7 1/4 mitre from Dewalt it’s a nice saw..ya I wish it was dbl bevel ,but still nice…..I am waiting for a 10″ version only because my 7 1/4 cordless won’t cut azek rails which I use every weekend…and the 12″ cordless is big…

yes, a 10″ slider would be nice.  the 12″ are just so big to haul around.

The 12″ is big and heavy.  Played with it at the store.  7 1/4″ is nice and light, but sacrifice some cut.  Seems like a 10 would fit the bill nicely.

Then maybe bump the table saw up to a 10?  Either way, I’ll be getting the table saw.

Table saw supposedly is getting bumped to a 10″ 120v max hybrid solution. I’d be shocked if we don’t see it revealed next month. Supposedly based on the DWE7491RS. 

Bremon wrote:

7 hours ago, Bremon said:

Table saw supposedly is getting bumped to a 10″ 120v max hybrid solution. I’d be shocked if we don’t see it revealed next month. Supposedly based on the DWE7491RS. 

@Bremon, hopefully it’s as nice as the 120V max miter saw that you own?

If the improvement for this saw off of the 7491 is the same refinement that the DHS790 has over the 780 it’s hard to imagine anyone being disappointed ??

Bremon wrote:

2 hours ago, Bremon said:

If the improvement for this saw off of the 7491 is the same refinement that the DHS790 has over the 780 it’s hard to imagine anyone being disappointed ??

Changes I see are grey metal, brushless motor, and option for battery or cord. Would be cool to see an innovative and useful new feature on this saw but I’m not sure what haha.

@Jronman Option for battery or cord I agree with, which is why I like their miter saw so much.

FrosBros82 wrote:

13 hours ago, FrosBros82 said:

@Jronman Option for battery or cord I agree with, which is why I like their miter saw so much.

It’s not common on corded tools but crushless motor is nice.

No sneak peaks of the new 10″ Dewalt chop saw ????

well its almost august so almost event time.

Ya….can’t wait . Not many sneak peaks compared to last year before the event. …Dewalt must have tightened the reigns a little…..I’m thinking there is a big announcement again this year…..not just new tools

Framer joe wrote:

8 hours ago, Framer joe said:

Ya….can’t wait . Not many sneak peaks compared to last year before the event. …Dewalt must have tightened the reigns a little…..I’m thinking there is a big announcement again this year…..not just new tools

I’m guessing demos of tool connect tools will be a thing then maybe we will see a lot of new vac stuff and more pluming and electrical stuff if the recent announcements of the cable stripper tool and pex tool are any hints.

I can’t wait.  Wish I had a ticket. Wish I knew who gives the tickets out, cause there are many people who shouldn’t be there and others who should be

So is there a certain event going on in August? 

let´s try to bring a bit stucture to this topic and write down what we know or to suspect

please try to keep the structure of this post and only add in new tools

… the next 4-5 posts nothing like: oh, great listing , didn´t know this was coming,, .. or thanks for listing, great idea ….)

(already known or even shipping: tracksaw, several cordless nailers)

anyone know the exact day of event ? / one or two day event / any agenda ?

1)

corded tools:

nothing known

from several posts some type of corded/cordless vac is suspected

no model number known

2)

flexvolt tools:

dcd996 X1

not really a new flexvolt tool, just an existing drill bundled with flexvolt battery (Europe)

dual port table saw ? / just rumors

single port ac adaptor / just rumors (some say canceled, some say in the making)

3)

cordless tools (20max):

• DCE511 fan
• DCCS620B Compact Chainsaw
• DE400 PEX expander
• DCS577 worm style circ. saw
• xxxxx concrete nailer
• DCG405 grinder, brushless
• xxxx jigsaw; just rumors, no pic, just assumption
• dcd997 bluetooth hammer drill (already on web site)
• dcd797 bluetooth hammer drill (already on web site)
• dcd792 bluetooth drill (already on web site)
• dcf888 bluetooth impact driver (already on web site)
• dcd777 compact brushless drill (already on web site)
• dcd778 compact brushless hammer drill (already on web site)
• dcf885 compact impact driver (already on web site)
• dce151 wire stripper

tool connect:

• DCB205BT 5,0Ah battery (already on web site)

one secret

please add in !

chers

midogrumpy

surprise !

now, I must add the Flexvolt Kompressor

DCC2560

That looks interesting, wonder what the run time on the battery is like.

On the rigid ,2 / 5ah will last me all day ..(1200 nails per specs) …the new Flex specs say (1220 nails ) on 1/ Flex 2ah/6ah ….so that should be all day, definitely on 1 ..3ah/9ah flex battery .. and with a 2.5 gal tank , you should be able to fire many more nails vs the rigid ,,before the compressor comes back on……..I just hope it runs quiet like the compact Dewalt 200psi trim compressor I have, it’s almost silent..

Speaking about rigid, my electrician bought a rigid cordless set a while ago because they advertised lifetime warranty on batteries. He went to home depot to get replacement batteries to find out those batteries weren’t made any more. And couldn’t be bought online. He raised a stink and got all his money back years later. Lol

Ya I bought into rigid for the cordless trim router ,sander, then got that small compressor which works fine for small trim jobs and hanger nails….of course Dewalt comes out with one now ! ……..

Framer joe wrote:

1 hour ago, Framer joe said:

Ya I bought into rigid for the cordless trim router ,sander, then got that small compressor which works fine for small trim jobs and hanger nails….of course Dewalt comes out with one now ! ……..

that moment when a DeWALT cordless sander is announced next week then a cordless router the week after..

For real @Jronman  those are coming ? Btw nice new symbol 

New dewalt drain augers on there website now

Framer joe wrote:

4 hours ago, Framer joe said:

For real @Jronman  those are coming ? Btw nice new symbol 

I’m hoping a cordless rear handle ros or ros/geared sander.  Maybe a cordless router that accepts 1/2 in collet. thanks my best friend is a graphic designer and wanted to help me design a logo. It’s not final but close to the final logo design

You do know DeWALT (and you might) have a cordless router in 20V already, you can run small 1/4 router bits in the DCS551 drywall tool. At 26,000 RPM it is a hair slower than the compact router’s top speed of 27,000. The base is smaller and would limit the diameter of bits available to you, but would probably work great with laminate trimming bits and small radius roundover bits. As for power I don’t think the little bit of wood or laminate would work it any harder than cutting 5/8″ drywall.

Grumpy MSG wrote:

13 minutes ago, Grumpy MSG said:

You do know DeWALT (and you might) have a cordless router in 20V already, you can run small 1/4 router bits in the DCS551 drywall tool. At 26,000 RPM it is a hair slower than the compact router’s top speed of 27,000. The base is smaller and would limit the diameter of bits available to you, but would probably work great with laminate trimming bits and small radius roundover bits. As for power I don’t think the little bit of wood or laminate would work it any harder than cutting 5/8″ drywall.

 

 

would depend on the wood but Im sure for softer woods it would work great.

I tried that set up…the base is tin like …really not made for that,,,it really doesn’t work at all….completely different then say my cordless Ridgid trim router…..trust me I wish it did…

I will repost this now;

some guys had to add in comments and we all lost track !

let´s try to add to the list first

let´t tray to add the date of the event and whoever knows or has an invite

a 1 or 2 day event ?

did you get some kind of agenda ?

let´s try to bring a bit stucture to this topic and write down what we know or to suspect

please try to keep the structure of this post and only add in new tools

… the next 4-5 posts nothing like: oh, great listing , didn´t know this was coming,, .. or thanks for listing, great idea ….)

(already known or even shipping: tracksaw, several cordless nailers)

anyone know the exact day of event ? / one or two day event / any agenda ?

1)

corded tools:

nothing known

from several posts some type of corded/cordless vac is suspected

no model number known

2)

flexvolt tools:

dcd996 X1

not really a new flexvolt tool, just an existing drill bundled with flexvolt battery (Europe)

dual port table saw ? / just rumors

single port ac adaptor / just rumors (some say canceled, some say in the making)

3)

cordless tools (20max):

• DCE511 fan
• DCCS620B Compact Chainsaw
• DE400 PEX expander
• DCS577 worm style circ. saw
• xxxxx concrete nailer
• DCG405 grinder, brushless
• xxxx jigsaw; just rumors, no pic, just assumption
• dcd997 bluetooth hammer drill (already on web site)
• dcd797 bluetooth hammer drill (already on web site)
• dcd792 bluetooth drill (already on web site)
• dcf888 bluetooth impact driver (already on web site)
• dcd777 compact brushless drill (already on web site)
• dcd778 compact brushless hammer drill (already on web site)
• dcf885 compact impact driver (already on web site)
• dce151 wire stripper

tool connect:

• DCB205BT 5,0Ah battery (already on web site)

please add in !

cheeeeers

midogrumpy

just to add-into the list

@midogrumpy In regards to the grinders there is rumored to be multiple models including at least 1 flexvolt. Also the jigsaw may or may not be coming in both d handle and barrel grips.

Dcc2560t1 cordless compressor……I really can’t wait for the event

mentioned above; did u all see this

DRAIN AUGER

DCD200B

no comments yet !

just list newproducts you have heard / rumored !!

This is why the Crew rocks, you guys know more before anyone else.  I love it.  

yeah, look at my list above (2 posts higher)

BUT there are also secrets !!!!

I see you have the dcf885 impact driver listed which is an old brushless model just curious if its a typo and theres a new impact driver or if you just mis read it as new? 

I know I sound like a broken record, but is there any word on any impact wrenches coming out?  Compact Brushless 1/2″ or I’ve seen pictures of something that looks like it might be a mid torque? 

@Biggie I have not heard anything about a mid torque, but I would assume that they would come out with something that is a little smaller, similar to what Milwaukee did earlier this year. 

midogrumpy wrote:

7 hours ago, midogrumpy said:

yeah, look at my list above (2 posts higher)

 

BUT there are also secrets !!!!

Think we’ll see these secrets in august? 

Yea there was a picture of what was maybe a mid torque or a redesign of a high torque on here a few months ago but it was hard to tell just what it was from the picture and the topic was deleted shortly after the picture got posted.

Maybe it will work. But that auger looks cheesy…….can’t wait for the event

Biggie wrote:

6 hours ago, Biggie said:

I see you have the dcf885 impact driver listed which is an old brushless model just curious if its a typo and theres a new impact driver or if you just mis read it as new? 

 

I know I sound like a broken record, but is there any word on any impact wrenches coming out?  Compact Brushless 1/2″ or I’ve seen pictures of something that looks like it might be a mid torque? 

the dcf888 is new and should be available soon if not already. It’s the 887 except includes tool connect.

On another note I guess my statement about DeWALT trying to play catch up with Milwaukee is actually becoming a thing. With all these tools from the E/P/HVACR/M trades coming out.

midogrumpy wrote:

On 7/30/2017 at 5:34 AM, midogrumpy said:

DCS577

…so is this friggin’ thing 20v or 60v?! I’m hearing both and I’m confused.