Lithium ion power packs

I recently purchased a Ryobi weed eater and a Dewalt leaf bower.  Both run on Lithium ion packs. The Dewalt pack (20v/ 5ah) gets pretty warm, warmer than I would like, when charging in the supplied DCB115 charger,  Probably due to its fast charge capability.  After doing some research, I have noticed that when a pack fails, it is always due to one or two bad cells in the pack.  I am wondering if these chargers  use cell balancing when charging.  It is leading me to beleive that these chargers are just charging and not minitoring or balancing each cell so that they all get the same charge. Does anyone have any input on how these chargers operate and your experiences?

Thanks

The dewalt battery packs are sealed and don’t let the heat out as good as other brands like the Bosch coolpack batteries but you’ve nothing to worry about as the charger you mentioned isn’t a fast charger it’s only 4 amp which is not fast like the Bosch 8 amp or makita 9 amp chargers !
This is due to the sealed packs they can’t be charged as fast as they don’t vent the heat , don’t worry about it they will be fine


Sent from my iPhone using Tapatalk

The 115 and 101 are faster charging then the 112..,but the flex fan cooled charger can and will charge a 5ah in half the time and be cooler

@Framer joe is right, the 118 really is awesome. I was very disappointed the OPE comes with a 115. 

jay1028 wrote:

5 hours ago, jay1028 said:

I recently purchased a Ryobi weed eater and a Dewalt leaf bower.  Both run on Lithium ion packs. The Dewalt pack (20v/ 5ah) gets pretty warm, warmer than I would like, when charging in the supplied DCB115 charger,  Probably due to its fast charge capability.  After doing some research, I have noticed that when a pack fails, it is always due to one or two bad cells in the pack.  I am wondering if these chargers  use cell balancing when charging.  It is leading me to beleive that these chargers are just charging and not minitoring or balancing each cell so that they all get the same charge. Does anyone have any input on how these chargers operate and your experiences?

Thanks

DeWalt employs balance charging in all their chargers, hence the multiple pin layout.  DeWalt batteries (20v and 12v) are “dumb” batteries only having a temp sensor built in, relying on the tools and chargers. The Ryobi batteries have the charge controllers built in.  Cost to manufacture is in DeWalt’s favor doing it this way(and they enjoy NOT passing the savings on to us).

Craigh9916 wrote:

The dewalt battery packs are sealed and don’t let the heat out as good as other brands like the Bosch coolpack batteries but you’ve nothing to worry about as the charger you mentioned isn’t a fast charger it’s only 4 amp which is not fast like the Bosch 8 amp or makita 9 amp chargers !
This is due to the sealed packs they can’t be charged as fast as they don’t vent the heat , don’t worry about it they will be fine


Sent from my iPhone using Tapatalk

Only packs I’ve been able to overheat are Milwaukee. No teal or yellow. 

@Cr8ondt Dewalt batteries are noticeably more affordable here than red or teal, so I would argue they do pass along some savings. 

@The.Handyman…naw never had a Dewalt pact overheat or get hot…warm ya…hot no….really never had a problem with a slide pack ever…I don’t remember when they came out but mine all still work fine…

The only tool I’ve ever heard them over heat on is the brushed grinder, but it was so rare to over heat because it usually ate a pack before it had a chance to over heat

Just not use to a high capacity pack.  It got warmer than I was confortable with but not hot that it couldn’t be held.  More like 35c. When I charge li-ion packs with an RC charger, you can charge at 1/2c and they never even get warm and they get charged to 4.2v. per cell and are all balanced. 

Bremon wrote:

1 hour ago, Bremon said:

Only packs I’ve been able to overheat are Milwaukee. No teal or yellow. 

 

@Cr8ondt Dewalt batteries are noticeably more affordable here than red or teal, so I would argue they do pass along some savings. 

I was implying comparing DeWalt to Ryobi battery pricing, take a street price(us) 2 pack of 4ah each, Yellow $130, Lime Green $100, yellow batteries are little more than a plastic box with 10 cells in em while lime green are 10 cells and a balance charge controller, so my point, lower cost to manufacture + higher retail = larger profit margin.  I’m not exactly hating on DeWalt, I’m just pointing out a fact….. And before we get all High end vs low end I’m only talking about the batteries, TTI and SBD volume buy their cells from the same (or VERY similar) OEM’s(IE Samsung, LG, Panasonic) and pay those OEM’s the same per cell price. 

No one can beat that Ryobi 2 pact deal….sometimes it’s 69$ after a holiday….seems like Ryobi doesn’t make money on the battery just the tool ,which is inexpensive…..other companies make money on the battery and will give you a tool,free….

Bremon wrote:

4 hours ago, Bremon said:

@Framer joe is right, the 118 really is awesome. I was very disappointed the OPE comes with a 115. 

the flexvolt ope doesn’t come with a fast charger or are you talking about 20v ope?

FlexVolt OPE comes with the crappy 115 charger, not the fan-cooled 118 (yes, really). 

Got into the Ryobi  pack out of curiousity.  Looks like they are stepping up their game.

jay1028 wrote:

3 hours ago, jay1028 said:

Got into the Ryobi  pack out of curiousity.  Looks like they are stepping up their game.

I wasn’t making it up….  Pop open a Ridgid battery and you’ll see almost the exact same thing, chip for chip part number for part number identical, just laid out different due to form factor.

I find the Ryobi tools a bit hit and miss, but their cells seem pretty good. 

Tug wrote:

4 hours ago, Tug said:

I find the Ryobi tools a bit hit and miss, but their cells seem pretty good. 

I absolutely agree, my primary cordless stuff is DeWalt, but have a bunch of Ryobi odds and ends to supplement my “lesser” tool needs, example, DeWalt’s caulk gun is $200 I have a hard time justifying that because I don’t run caulk every day, while Ryobi is only $40, so that was a no brainier for me.

Cr8ondt wrote:

1 hour ago, Cr8ondt said:

I absolutely agree, my primary cordless stuff is DeWalt, but have a bunch of Ryobi odds and ends to supplement my “lesser” tool needs, example, DeWalt’s caulk gun is $200 I have a hard time justifying that because I don’t run caulk every day, while Ryobi is only $40, so that was a no brainier for me.

Almost exactly what I’m doing! My entire inventory was stolen last year, so now I carry cheap tools that I don’t worry about being stolen, but all my big guns are red and yellow. These don’t leave my sight, they only leave my home if I know I’m definitely gonna need them. 

@Tug Are they framing homes in London?

Framer joe wrote:

8 hours ago, Framer joe said:

@Tug Are they framing homes in London?

Sorry, don’t understand the question. Could you be more specific? 

Tug wrote:

5 hours ago, Tug said:

 

Sorry, don’t understand the question. Could you be more specific? 

Framing is building the skeleton of the home or more broadly new construction:

 [External image (upload.wikimedia.org), not copied]

@Framer joe is probably asking because (we assume)most of the building space is used in the UK.

Yup yup…..as a framer we build the frame,install windows,doors,exterior trim,roof,siding and interior walls….we call it..”weather tight” …plaster ready…

No, we like our homes wind proof. Ha ha, I’m kidding, still mostly brick built, but with methods being tweaked year on year. I can’t stand new-builds, bloody awful things! Chipboard floors upstairs, concrete floors downstairs, pre-fabricated loft spaces etc. This all adds up to buildings that’re very awkward to rewire. The best homes in the UK were built by the Victorians, fantastic engineers! Nowadays? All crap! 

All crap in U.K. ? Not here….problem is in the USA,different codes by state.. if all building codes adapted cape cod standard there would be no house blown over ever …..ever here of a house on cape being blown apart ? No,..toughest codes in the US…..Arizona watches houses blow around ,Florida same thing ……quality lasts like Italian architecture or Greek….or cape cod…lol but true

The builders aren’t crap, but it’s a tough market, so cheaper methods are used. Compliance is key, get the boxes ticked for the lowest outlay and they’re laughing. 

Framer joe wrote:

6 hours ago, Framer joe said:

All crap in U.K. ? Not here….problem is in the USA,different codes by state.. if all building codes adapted cape cod standard there would be no house blown over ever …..ever here of a house on cape being blown apart ? No,..toughest codes in the US…..Arizona watches houses blow around ,Florida same thing ……quality lasts like Italian architecture or Greek….or cape cod…lol but true

I have heard of hurricanes hitting the Cape, but I have never heard of tornadoes there. They may be whole lot smaller in area covered, but I think they are a whole lot meaner. I have never heard of a hurricane picking up a farm tractor, but tornadoes have destroyed more than a few 5 ton + tractors picking them up and throwing them like an egg on pavement.

To have code from one town be the code all towns have to follow wouldn’t make sense. Each town has different conditions. Different soils, temperatures, weather, etc.

No Jman create a building code for the worse case scenario……how  is it working now ? It’s not people die……when you pour a slab with no crawl space then bolt a frame on it ,that is not structurally sound….when you have 8′ poured foundations with embedded metal straps like we do here ,,,there is no chance of up lift….HDU  are bolted floor to floor with rods connecting them….it’s  engineered to survive ….it’s all about technique..not soil ,or temp….codes are state wide not by town…..

………Never been in a tornado they are extreme..but the cape has wind force that strong plenty of times…it will send a yacht the next street over……ocean front homes survive it all the time…….

        ….earthquakes create more havoc yet proper engineering will save a building….windows used ocean front can take a 2×4 shot out a canon at 200mph and not break……..sorry I went of course …..more POWA!!!