Home Depot

chrisk wrote:

Try Bessey K Body clamps too. Marked down, get em while you can.

Dammit chris!! ur twisting my arm man!! 😉

LastOfTheVee8s wrote:

image.jpeg

I’ve been wanting to buy this speaker and I’m glad I waited. Just happened to notice it at Home Depot today so I grabbed it. Can’t beat a $20 price drop.

Dude that’s a sweet deal!! its a nice lil radio to im always carrying mine with me.

chrisk wrote:

Try Bessey K Body clamps too. Marked down, get em while you can.

How much for the clamps?

Nice speaker, too bad I have the m12 speaker, need to get a full size job site radio, I like the look and sound of the tough system but I don’t have any tough system stacks. I like milwaukees big m18 unit or the Bosch power box.

Jimbo

Sent from my iPhone using Tapatalk

39 and under. 39 for the fifties. 35 for the 12s

A Depot by me has quite few Ridgid miter saw stands for 100 bucks, I’m thinking that price might drop? If it does I’m picking it up

MikeyB wrote:

A Depot by me has quite few Ridgid miter saw stands for 100 bucks, I’m thinking that price might drop? If it does I’m picking it up

$100 is a smoking deal on they stand. It’s no Bosch, but then again it’s a third the price. Honestly, the only real criticism that I have about it is that it’s a little hard to raise up with a heavy saw installed but not exceptionally so.

Sent from my iPhone using Tapatalk

Home Depot is dropping prices on special buys.

I just picked up the ridgid brushless hammer drill and circ saw plus two batteries for $149

It was $179 a couple weeks ago and $159 last week.

[External image (images.tapatalk-cdn.com), not copied]

Jimbo

Sent from my iPhone using Tapatalk

Came across this today.

99_XC600 wrote:

Came across this today.

You stamp your name on it? Or do a walk by TiA sticker slam?

Jimbo

Sent from my iPhone using Tapatalk

If I didn’t already have the 52″ Husky I would have strapped it to the roof of my car. Lol

My Home Depot didn’t even carry that mini blower by Dewalt. Had to go to Lowes.

[External image (images.tapatalk-cdn.com), not copied]

Confirmed sighting

99_XC600 wrote:

Came across this today.

The Dewalt 52″ tool boxes were a flop I think they were just too much money compared to the Husky boxes.

That price looks much better to.me. it’s tempting now.

Sent from my SM-N900V using Tapatalk

Jasonc wrote:

The Dewalt 52″ tool boxes were a flop I think they were just too much money compared to the Husky boxes.

I never really looked at them due to the pricing. But when I saw it today at the current price I really didn’t see that many differences to the 52″ Husky I picked up in the spring. The main difference was the automatic closure on the drawer slides.

Same here 99 I didn’t see or notice much that would make me regret buying the husky don’t get me wrong I love my Dewalt but no regrets here going with the husky for the price I got it for.

I had a feeling the Dewalt box would come down to compete with the Milwaukee…

I get the impression the Dewalt box is for people who want the Dewalt more than the Box.  They don’t seem to be around here, but I know some guys who practically worship Dewalt which I’ve never seen as much from other brands.  You know the sort of people who refuse to even buy hand tools from another brand.

Saw the Ryobi miter saw stand and saw on display at one of the local HD’s.

 

I don’t need one, but looks decent.

They’ve had them a while, the stack at my HD looks the same as it did on black friday

Jimbo

Sent from my iPhone using Tapatalk

The price for the stand is really good.

Bigmikez wrote:

The price for the stand is really good.

I paid $15 for mine earlier this year at my depot. They were clearances out. Rang up a penny but I didn’t know about the penny deals at the time and paid last price for it. For $15 I bought the last two. [emoji16]

Sent from my XT1254 using Tapatalk

Looks like Home Depot is clearing inventory of Quick-Tatch trowels.

 

http://www.homedepot.com/b/N-5yc1vZ7/Ntk-BrandSearch/Ntt-hart?Ntx=mode+matchall&NCNI-5

 

It’s a bit strange, but the kits they sell in store are not on sale.

I went into HD to pick up some of those Bessey clamps, they had just ran out earlier after talking to the tool manager. He mentioned that he was expecting some more of the same pack coming in at the same price…so if you’re looking for some and missed out, you may want to check again.

Definitly got my share of clamps this holiday season

Jimbo

Sent from my iPhone using Tapatalk

{\rtf1\ansi\ansicpg1252

{\fonttbl\f0\fnil\fcharset0 HelveticaNeue;}

{\colortbl;\red255\green255\blue255;\red51\green51\blue51;}

\deftab720

\pard\pardeftab720\qc\partightenfactor0

\f0\fs24 \cf2 \expnd0\expndtw0\kerning0

\outl0\strokewidth0 \strokec2 }

Home Depot got the Milwaukee Back Packs for 59:00 normally 99.00..

Jobsite Backpack

Model #48-22-8200

Was $99.00 Save 40%

$59.00 each

Remove from cart

MikeyB wrote:

{\rtf1\ansi\ansicpg1252

{\fonttbl\f0\fnil\fcharset0 HelveticaNeue;}

{\colortbl;\red255\green255\blue255;\red51\green51\blue51;}

\deftab720

\pard\pardeftab720\qc\partightenfactor0

\f0\fs24 \cf2 \expnd0\expndtw0\kerning0

\outl0\strokewidth0 \strokec2 }

Home Depot got the Milwaukee Back Packs for 59:00 normally 99.00..

Did you have a link or did your message have a stroke?

Sent from my SCH-I535 using Tapatalk

KnarlyCarl wrote:

Did you have a link or did your message have a stroke?

Sent from my SCH-I535 using Tapatalk

It’s like the Matrix man, you can see everything as computer code now!

Sent from my SM-N900V using Tapatalk

Sorry guys, I wasn’t able to post apic, but if you go to the home page then go to the power tool section click on the bottom for the Milwaukee page and scroll through till you see it..

Haha

[External image (uploads.tapatalk-cdn.com), not copied]

Still not the same as my VetoProPac! Man thats thw best bag I’ve ever had

Sent from my SCH-I535 using Tapatalk

[External image (images.tapatalk-cdn.com), not copied]

I’d be all over this if i didn’t win that ridgid Kit.

Jimbo

Sent from my iPhone using Tapatalk

Dude that’s a good deal

Jimbos1ice wrote:

[External image (images.tapatalk-cdn.com), not copied]

I’d be all over this if i didn’t win that ridgid Kit.

Jimbo

Sent from my iPhone using Tapatalk

Yup rub it in all right

That’s a great saw and a great deal. They have had a couple on the clearance rack at my Depot for $180.00 for a couple of months now. When I get back there if that saw is 115 dollars I’m buying another one and selling it to my brother for 200… Lol

I don’t need another cordless saw but I still want one of those just to try it out.

Sent from my SM-N900V using Tapatalk

kruton wrote:

I don’t need another cordless saw but I still want one of those just to try it out.

Sent from my SM-N900V using Tapatalk

Kruton, that saw is a Tiger, I don’t need another circular either, but I’m dying to get that Makita brushless cordless… Lol

MikeyB wrote:

Kruton, that saw is a Tiger, I don’t need another circular either, but I’m dying to get that Makita brushless cordless… Lol

I got a good deal on the brushless makita from Bishop tool so it was a no brainer. It’s a great saw man!

Sent from my SM-N900V using Tapatalk

http://www.homedepot.com/p/DEWALT-12-in-Clamps-and-16-ft-Tape-Measure-DWHT74987D/206292394

 

One thing about clamps and tape measures is you never seem to have enough.

They had a kit with the glue gun I picked up around that price too.

Jimbo

Sent from my iPad using Tapatalk

Jimbos1ice wrote:

They had a kit with the glue gun I picked up around that price too.

Jimbo

Sent from my iPad using Tapatalk

. I regret not picking the same deal up 🙁

Bigmikez wrote:

. I regret not picking the same deal up 🙁

 

kit with the glue gun is still available online for the same price:

 

http://www.homedepot.com/p/DEWALT-Rapid-Heat-Ceramic-Glue-Gun-Sticks-and-Clamps-Combo-DWHT74986D/206291530

Jump on it it’s a nice glue gun

Jimbo

Sent from my iPad using Tapatalk

Damnit, stop trying to make me spend money!

Let me know crew is this is a good deal? I found it on a deal app that I usually check out and they have this multi tool on sale supposedly but I even found it on amazon for same price so I’m just wondering if it’s this price all the time or not, Thanks crew! http://m.homedepot.com/p/Bosch-3-Amp-Multi-X-Corded-Oscillating-Tool-Kit-31-Piece-MX30EC-31/205673468?AID=11210757&PID=361116&SID=ebs2d4066077d8816d1452487327306sbe&cm_mmc=CJ-_-361116-_-11210757&cj=true

ankur wrote:

kit with the glue gun is still available online for the same price:

http://www.homedepot.com/p/DEWALT-Rapid-Heat-Ceramic-Glue-Gun-Sticks-and-Clamps-Combo-DWHT74986D/206291530

I’ve had really bad luck with the Dewalt promo special clamps. I bought a number of them last year and have had about a 50% failure rate. The just don’t clamp very tightly and the jaws slip instead of closing completely. One clamp I’ve got won’t even clamp hard enough to squash an orange.

I know in theory they have a lifetime warranty, but there’s nothing on Dewalt’s website that says what to do and they were part of a promo kit, so I can’t really even swap them out at the depot. I won’t buy any more yellow clamps that aren’t the heavy duty, individual ones anymore.

Sent from my iPhone using Tapatalk

Bigmikez wrote:

Let me know crew is this is a good deal? I found it on a deal app that I usually check out and they have this multi tool on sale supposedly but I even found it on amazon for same price so I’m just wondering if it’s this price all the time or not, Thanks crew! http://m.homedepot.com/p/Bosch-3-Amp-Multi-X-Corded-Oscillating-Tool-Kit-31-Piece-MX30EC-31/205673468?AID=11210757&PID=361116&SID=ebs2d4066077d8816d1452487327306sbe&cm_mmc=CJ-_-361116-_-11210757&cj=true

I think it’s a good deal. With the attachments that’s with it. I would say it’s normally around $140. I just bought the drimel for $69.00 but you have to use the wrench to loosen the screw but you don’t have to remove the screw. And it cuts fast and sands great as well. 10 speed settings and several blades samding pad and several different grit papers.

Millerz

Bigmikez wrote:

Let me know crew is this is a good deal? I found it on a deal app that I usually check out and they have this multi tool on sale supposedly but I even found it on amazon for same price so I’m just wondering if it’s this price all the time or not, Thanks crew! http://m.homedepot.com/p/Bosch-3-Amp-Multi-X-Corded-Oscillating-Tool-Kit-31-Piece-MX30EC-31/205673468?AID=11210757&PID=361116&SID=ebs2d4066077d8816d1452487327306sbe&cm_mmc=CJ-_-361116-_-11210757&cj=true

 

From a quick search it appears bosch and fein are going to switch interfaces on their multi-tools to have a better 3-D fit with their blades and to reduce the stress on the motors of the tools. 

 

http://www.toolsofthetrade.net/power-tools/bosch-and-fein-announce-changes-to-oscillating-tools_o.aspx

 

as if two types of connections weren’t enough.  

 

I guess what I am saying this is a good deal now but you are buying into old tech.

Shuutr wrote:

From a quick search it appears bosch and fein are going to switch interfaces on their multi-tools to have a better 3-D fit with their blades and to reduce the stress on the motors of the tools. 

 

http://www.toolsofthetrade.net/power-tools/bosch-and-fein-announce-changes-to-oscillating-tools_o.aspx

 

as if two types of connections weren’t enough.  

 

I guess what I am saying this is a good deal now but you are buying into old tech.

Normally I would agree, but not in this case.  I see starlock plus and max fizzling out first simply because people don’t want to waste shelf space on a blade that only fits a handful of tools.  Plain starlock will probably stick around for longer because they are compatible with OIS and Bosch will want to continue supporting its starlock tools.  The problem comes in with the tools they’re going to start selling that are only compatible with their select blades, and let’s remember blades are a big expense for OMTs.  The big problem with their blades is that the design is probably proprietary so you’re stuck with either overpriced blades or knockoffs from companies so shady they don’t care about the patent.  To make matters worse, they simply can’t produce starlock blades at the same price point as an OIS blade because of the 3D connection.  It requires more steps, metal, precision, space, and packaging.  No more bent, stamped piece of metal.  These require some real manufacturing.

 

The idea of better fitment is good, but OIS is solid enough that with a good tool and halfway decent blade you’re not losing power to the blade slipping.  If there was power loss this would be a great improvement, but you can’t magic more power back from nonexistent power loss.

 

I don’t see any reason to get a tool using starlock over one using OIS.  In fact I think it’s a good idea to buy a Bosch OMT now because they make good OMTs and I’d rather get an OIS one before they switch to starlock.

 

There’s one area where starlock could be useful, and that’s more powerful tools using larger blades or a larger sweep angle that would break the OIS interface.  The problem is that’s a whole different class of tool like comparing an impact wrench to impact driver.  I wouldn’t buy an impact driver with a 1/2 square head because bit sockets are complete overkill and overpriced for an impact driver’s job.

 

Sorry for the rant, but I was just getting happy about everything standardizing to toolless OIS interfaces when Bosch decided to throw a wrench in everything and announce starlock.