New Shop Underway….Part Deuce!

CATERPILLAR wrote:

Just now, CATERPILLAR said:

Very nice ? why is there  peg board behind the stud’s?

It was there when I bought the house and he drove tapcons in the wall. I just didn’t feel like patching 🙂

ChrisK wrote:

Just now, ChrisK said:

It was there when I bought the house and he drove tapcons in the wall. I just didn’t feel like patching 🙂

Oh that makes sense I thought u put it there ?

@ChrisK should I even ask how much the systainer boxes were?

Jronman wrote:

1 minute ago, Jronman said:

@ChrisK should I even ask how much the systainer boxes were?

Sure. Almost nothing, I’ve only bought maybe four. They  give them free when you buy tools 😉 

ChrisK wrote:

1 minute ago, ChrisK said:

Sure. Almost nothing, I’ve only bought maybe four. They  give them free when you buy tools 😉 

well then guess we shouldn’t ask how much the tools were haha. 

@ChrisK I love watching your shops evolve! One quick mention…looks like the 12/2 on the right side of the double box has the outer jacket stripped back to far. Might want to run a new wire and make sure the jacket gets all the way through the box for safety.

overanalyze wrote:

19 minutes ago, overanalyze said:

@ChrisK I love watching your shops evolve! One quick mention…looks like the 12/2 on the right side of the double box has the outer jacket stripped back to far. Might want to run a new wire and make sure the jacket gets all the way through the box for safety.

Thanks Andrew, I appreciate that sir! I ended up slicing too much of the jacket off but I might have the slack so I don’t have to run another 8′ of wire but moving the box. I will play with it in the morning but if it doesn’t work, I’ll have some extra Romex 😀

Jronman wrote:

3 hours ago, Jronman said:

well then guess we shouldn’t ask how much the tools were haha. 

Yeeeesh…..it’s like when you buy a really expensive car. You don’t fixate on the price, just the knowledge that it’s going to give a mind blowing experience. After you buy it is when you start to panic 🙂

I do not have an exact number but I’ve got the following tools….

TS55REQ

Kapex KS120

Domino DF500

MFK700

OF1010

OF1400

Carvex PS420EBQ

HKC55

RO90DX

Pro5 LTD

MIDI

MFT/3

MFT/Kapex

T18 Set

CXS Set

C15

LR32

Syslite

Multiple Rails for the TS and HKC

Im sure I’m missing some on the list but this was a crazy summer, fall and winter. Sold my home, stayed with inlaws. Bought a home. Had a healthy beautiful son…Who decided to come very early. Spent a month in the hospital with the cute little monster….and now I’m trying to get in gear!!!

ChrisK wrote:

Thanks Andrew, I appreciate that sir! I ended up slicing too much of the jacket off but I might have the slack so I don’t have to run another 8′ of wire but moving the box. I will play with it in the morning but if it doesn’t work, I’ll have some extra Romex [emoji3]

overanalyze wrote:

3 minutes ago, overanalyze said:

 

Been there before. Just want you and your family safe! Could always add another outlet between the two and only have to run a short run of wire that way.

 

Dude, I didn’t even think of that. THANK YOU!!!!! I’ve got my head all the way up my butt right now. That would make things a lot easier!

overanalyze wrote:

6 minutes ago, overanalyze said:

 

Been there before. Just want you and your family safe! Could always add another outlet between the two and only have to run a short run of wire that way.

 

True Dat !! You can never have too many outlets 

overanalyze wrote:

45 minutes ago, overanalyze said:

@ChrisK I love watching your shops evolve! One quick mention…looks like the 12/2 on the right side of the double box has the outer jacket stripped back to far. Might want to run a new wire and make sure the jacket gets all the way through the box for safety.

I shot an insulation staple into a wire. the electrician had to replace the whole wire. woops.

ChrisK wrote:

Yeeeesh…..it’s like when you buy a really expensive car. You don’t fixate on the price, just the knowledge that it’s going to give a mind blowing experience. After you buy it is when you start to panic [emoji4]

 

I do not have an exact number but I’ve got the following tools….

TS55REQ

Kapex KS120

Domino DF500

MFK700

OF1010

OF1400

Carvex PS420EBQ

HKC55

RO90DX

Pro5 LTD

MIDI

MFT/3

MFT/Kapex

T18 Set

CXS Set

C15

LR32

Syslite

Multiple Rails for the TS and HKC

 

Im sure I’m missing some on the list but this was a crazy summer, fall and winter. Sold my home, stayed with inlaws. Bought a home. Had a healthy beautiful son…Who decided to come very early. Spent a month in the hospital with the cute little monster….and now I’m trying to get in gear!!!

JimboS1ice wrote:

42 minutes ago, JimboS1ice said:

Chris you get your pro 5 yet?

Jimbo

sent from tapatalk
 

I did Jimbo. It’s working wonderfully, that was one of the missing systainers 🙂

ChrisK wrote:

I did Jimbo. It’s working wonderfully, that was one of the missing systainers [emoji4]

JimboS1ice wrote:

1 hour ago, JimboS1ice said:

Lucky you got one of the good ones!


Sent from my iPhone using Tapatalk

?

rrich1 wrote:

?

JimboS1ice wrote:

Just now, JimboS1ice said:

My pro 5 is going in for service, large bash has bad bearings and the sander skips and hops around, very unstable


Sent from my iPhone using Tapatalk

oh wow I didn’t hear about that. mine isn’t due until march.

rrich1 wrote:

oh wow I didn’t hear about that. mine isn’t due until march.

JimboS1ice wrote:

3 minutes ago, JimboS1ice said:

Couple guys on Instagram had videos of their possessed sanders lol


Sent from my iPhone using Tapatalk

nice, ill search them out

Jronman wrote:

21 hours ago, Jronman said:

well then guess we shouldn’t ask how much the tools were haha. 

Free when you buy the tools, That’s funny Chris. 

Nordraw wrote:

44 minutes ago, Nordraw said:

Free when you buy the tools, That’s funny Chris. 

Hehehehe

ChrisK wrote:

23 hours ago, ChrisK said:

Made a little more headway today. I wired in a junction and a 2 gang and a single, then headed to Mom in laws with my wife and son. Maybe some more tomorrow![External image (uploads.tapatalk-cdn.com), not copied][External image (uploads.tapatalk-cdn.com), not copied][External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPhone using Tapatalk

 Why drill out the studs to run the romex, you could have just hung it on the peg board? HA HA

SetBuilder wrote:

53 minutes ago, SetBuilder said:

 Why drill out the studs to run the romex, you could have just hung it on the peg board? HA HA

I have a DCD996! Why NOT?!?!?!?!?!? 

ChrisK wrote:

On January 11, 2017 at 10:12 PM, ChrisK said:

Well, I finally got to do some work downstairs. Not much, but I’m a busy dad now soooooo….[External image (uploads.tapatalk-cdn.com), not copied][External image (uploads.tapatalk-cdn.com), not copied][External image (uploads.tapatalk-cdn.com), not copied][External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

Hey Chris just curious.. Did you by any chance put a moisture barrier below your bottom plate? 

mike_dave wrote:

19 minutes ago, mike_dave said:

Hey Chris just curious.. Did you by any chance put a moisture barrier below your bottom plate? 

Actually no. I didn’t build the house but it is designed with a drainage syste, beneath the foundation that feeds out into the woods behind my house facing downslope. It’s really dry down there too. The family we bought our home from had some really expensive musical instruments and some furniture down there. They had throw not an area rug down and had a small den in place. Eventually, I will have a shop in an outbuilding and the framing I do will eventually continue and insulation will be added and the particle board walls will be replaced with sheet rock.

Gotcha ?? glad you had already thought about that ;D

Couple of more lights and a wall studded up!!

ChrisK wrote:

Couple of more lights and a wall studded up!!

I seeeeeeee   green !

rrmccabe wrote:

32 minutes ago, rrmccabe said:

I seeeeeeee   green !

 

A little. Not enough though. The 700 will be mine!!!!!!!

I would be surprised if the 700 ever makes it to my shop.  I just dont think I have enough use for it. The quick release tenons you can buy would be super cool though. Wish they could do that with 500 size tenons but as far as I know they cant.

And slowly….using all of its great strength….the Kraken slowly emerges….[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

ChrisK wrote:

And slowly….using all of its great strength….the Kraken slowly emerges….[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPad using Tapatalk

Foneguy wrote:

49 minutes ago, Foneguy said:

RELEASE THE KRAKEN !!!!
(Cool Bazinga cup)


Sent from my iPhone using Tapatalk

Why thank you sir!

ChrisK wrote:

Why thank you sir!

You’ve got a really good setup, keep it up chris! 😉

@ChrisK even has a festool level. Do you got a systainer for your level?

Oh wow the makita box connects to systainers.

Jronman wrote:

On 1/25/2017 at 10:50 AM, Jronman said:

@ChrisK even has a festool level. Do you got a systainer for your level?

 

Oh wow the makita box connects to systainers.

Ha, no, no systainer for the level. It’s a rebranded Stabilla lighted level as a limited edition Festool. I was at a local hardware store two years ago and they had the level leaned up against an old rack in the back of their Festool display. Awesome level too.

Jronman wrote:

On 1/14/2017 at 1:53 PM, Jronman said:

well then guess we shouldn’t ask how much the tools were haha. 

Free when you buy the tools, That’s funny Chris. 

Nordraw wrote:

4 hours ago, Nordraw said:

Free when you buy the tools, That’s funny Chris. 

Thanks Nordraw 😉

I ended up getting my sawstop assembled, tuned and calibrated and added the Incra fence. Tuning that friggin thing was a PITA. I also sheathed one 4′ section of wall but slow going. 

When I bought my Jet table saw I did not have a truck at the time. I paid one of the dealers employees to deliver the saw and set it up, so glad I did.

SetBuilder wrote:

48 minutes ago, SetBuilder said:

When I bought my Jet table saw I did not have a truck at the time. I paid one of the dealers employees to deliver the saw and set it up, so glad I did.

Oh I’ve got a truck 🙂

We sold our home this summer and bought a new home, a town up, moving in at the very end of September. We were here for a month and half with my tools in storage. Then my son was born and we spent a month at the hospital. My sawstop spent quite a while (from July actually) disassembled and covered in tools and dust after I moved it from my last shop. This girl needed to be built from the table on up and recalibrated. I don’t mind though, it’s like seeing an old friend come back and taking the time to re calibrate everything makes me quite happy!

Here is the girl looking all assembled and tuned up! Oh…and she’s having a cappuccino….[External image (uploads.tapatalk-cdn.com), not copied]
[External image (uploads.tapatalk-cdn.com), not copied]

And Will just slapped daddy down….
[External image (uploads.tapatalk-cdn.com), not copied]


Sent from my iPhone using Tapatalk

Annnnnnnd…..just ignore the small gap by the switch….. 😉[External image (uploads.tapatalk-cdn.com), not copied]

That is one side completed. I won’t be “walling in” the whole basement. Just sections for the shop. Eventually the shop will be in an out building.


Sent from my iPhone using Tapatalk

I will be trimming that wall and painting at some point but I’m still laying out this thing!!


Sent from my iPhone using Tapatalk

ChrisK wrote:

Annnnnnnd…..just ignore the small gap by the switch….. [emoji6][External image (uploads.tapatalk-cdn.com), not copied]

That is one side completed. I won’t be “walling in” the whole basement. Just sections for the shop. Eventually the shop will be in an out building.


Sent from my iPhone using Tapatalk

 

I will be trimming that wall and painting at some point but I’m still laying out this thing!!


Sent from my iPhone using Tapatalk

Paint?  Wipe on poly. Looks like a million dollar wood shop!

rrmccabe wrote:

49 minutes ago, rrmccabe said:

Paint?  Wipe on poly. Looks like a million dollar wood shop!

 

I actually though about that. Problem will be the screws securing the panels. Can go with putty over them. Not sure I want to cover the screws with putty because eventually the walls will come down when the shop gets moved out and I build a family room down there. Any ideas?

ChrisK wrote:

1 minute ago, ChrisK said:

I actually though about that. Problem will be the screws securing the panels. Can go with putty over them. Not sure I want to cover the screws with putty because eventually the walls will come down when the shop gets moved out and I build a family room down there. Any ideas?

Fastcap power head screws and flush cutting bit. Cover with Fast Cap wood adhesive caps which are real wood and finish as well.

You can see bit and screws here.

http://www.fastcap.com/estore/pc/viewPrd.asp?idproduct=15&idcategory=0

Fancy saws … Drinking their fancy coffee !!!???

Looks like your son went the full :08 seconds …. wore you out !!!!!!!!!

FANTASTIC !!! ?????