Archived from the Tools In Action forum (Pub Talk). This thread is read-only.
What tool are you using right now, you obviously put it down to read this what was it?…..
124″ meat band saw but I think that beast just set me down lol
Jimbo
Sent from my iPhone using Tapatalk
M12 Fuel screwdriver, trimming out (installing the devices) in a full-gut reno.
Working evenings this week so slept in and just turned off the white noise machine: i.e., M18 job site fan haha.
Ryobi 6″ buffer
DeWALT handheld ratcheting screwdriver
DeWalt – DCN660 16 Gauge Finish Nailer 20v Max w/ 5.0 Battery – replacing/repairing moldings
JimboS1ice wrote:
8 hours ago, JimboS1ice said:124″ meat band saw but I think that beast just set me down lol
Jimbo
Sent from my iPhone using Tapatalk
I hated cleaning the cutting room every night. I HATE HATE HATE HATE HATE IT
also a screw driver for some new computer hardware.
pancing wrote:
48 minutes ago, pancing said:I hated cleaning the cutting room every night. I HATE HATE HATE HATE HATE IT
i only clean when someone calls off #journeymanproblems LOL
Milwaukee m12 drill, was taking the outer cabinet off a Marantz 4450 being dropped off at the shop. I didn’t want to risk damaging the wood cabinet by it being in the shop.
JimboS1ice wrote:
1 minute ago, JimboS1ice said:i only clean when someone calls off #journeymanproblems LOL
Tbh the only thing i liked about cleaning the cutting room was i could take all the ribeye caps home 😀
Mighty Seven 1/2″ impact. Just wrapped up a brake job on the Ole Dodge.
Sent from my SM-N900V using Tapatalk
Last thing before I called it a day was a new Bosch 12v impact driver my father in law bought, just for kicks I sunk a tapcon screw in the end of a treated 4×4. Then I grabbed my m12 impact and did the same just as a comparison. Then I went home
Sent from my XT1585 using Tapatalk
Milwaukee 12 volt tubing cutter, cutting in 2 new ball valves on my water main… Then My old B&D leaf hog blower to clean the gutters , then Of course the skimmer to clean the pool after cleaning the gutters,, lol
MikeyB wrote:
On 8/4/2016 at 4:56 PM, MikeyB said:Milwaukee 12 volt tubing cutter, cutting in 2 new ball valves on my water main… Then My old B&D leaf hog blower to clean the gutters , then Of course the skimmer to clean the pool after cleaning the gutters,, lol
Really depend on my m12 tubing cutter, really like it a lot, but I’m sure mine looks much dirtier ha
Ran into my boss just a bit ago and we were talking about “his Centipede the one i use” HAHA so I pulled it out and showed him how to set it up, he gives me pretty free range to buy on the company card with good judgment… anyone looking for a portable workstation or prep/paint/finish/ table, it’s an awesome thing to have! The folding legs and feet under the plywood is what is called the Centipede
..
Nice set up Knarly.
I picked up that Centipede at Lowes for $50.00, I love that thing.
KnarlyCarl wrote:
On 8/5/2016 at 11:54 PM, KnarlyCarl said:The folding legs and feet under the plywood is what is called the Centipede
Been saying for years that I really should set up something on the larger jobs, keep from working off the floor, but never have gotten around to it. My back and knees would probably thank me.
Using the Fuel High Torque under the truck, replacing various front end bushings.
Taking a break from riding the lawn tractor. That’s the tool I’m using right now.
Takes 6 hours to mow my lawn. A little more this time. Had to clean up the lawn from a 2 car crash that landed in my yard. This one had 2 fatalities.Fifth car crash at my corner in 2 months. Three of the five wrecks all of the cars landed in my yard??
I’m beginning to wonder if I ought to even mow at the corner.
Pay attention and drive safe everyone.
CXS, IDH182, Festool Level, Auriou ras. Putting up a handrail for the second floor because the buyers of our home need one for FHA
LarryS wrote:
2 hours ago, LarryS said:Taking a break from riding the lawn tractor. That’s the tool I’m using right now.
Takes 6 hours to mow my lawn. A little more this time. Had to clean up the lawn from a 2 car crash that landed in my yard. This one had 2 fatalities.Fifth car crash at my corner in 2 months. Three of the five wrecks all of the cars landed in my yard??
I’m beginning to wonder if I ought to even mow at the corner.
Pay attention and drive safe everyone.
Why so many accidents? That’s freaking insane that many accidents and fatalties
Aye you should petition the local DOT or State DOT if it’s a State owned highway for a guardrail? I would hate to have some jamoke, not paying attention or speeding or drunk or whatever mow through my yard with my family outside. They might put the rail up for you and that will also deflect cars and possibly save lives.
DR99 wrote:
2 hours ago, DR99 said:Why so many accidents? That’s freaking insane that many accidents and fatalties
I think they are just not paying attention. They have stop ahead signs way before the actual stop sign.
Seen a semi blow right by the stop sign before.
ChrisK wrote:
1 hour ago, ChrisK said:Aye you should petition the local DOT or State DOT if it’s a State owned highway for a guardrail? I would hate to have some jamoke, not paying attention or speeding or drunk or whatever mow through my yard with my family outside. They might put the rail up for you and that will also deflect cars and possibly save lives.
Never thought of something like that but we are about 300′ or more off of the road.They would have to get by some trees before they got to my house.
LarryS wrote:
15 minutes ago, LarryS said:I think they are just not paying attention. They have stop ahead signs way before the actual stop sign.
Seen a semi blow right by the stop sign before.
Never thought of something like that but we are about 300′ or more off of the road.They would have to get by some trees before they got to my house.
Glad to hear that Larry!
Ridgid shop vac
Logan p wrote:
1 hour ago, Logan p said:Ridgid shop vac
Same.
22 mm Pittsburgh impact socket on a Pittsburgh breaker bar, an oxyacytalene torch and the rhyming english and spanish swear dictionary. Well that was the last tools I held. Unless you count a JD 6R or a case 621D.
[External image (uploads.tapatalk-cdn.com), not copied] The old Benchmade Presidio auto-opener. The daughter turned 5 today and had a birthday party so dad is opening about 30 Barbie dolls.
Sent from my SM-N900V using Tapatalk