Today we shared the Werner ATS-72 6 ft. Pop-up Telescoping Scaffold in an Instagram reel, tagging @wernersafetyaboveall (affiliate, we may earn a commission). Here is the clip.
View this post on Instagram
What Is the ATS-72?
The ATS-72 is Werner’s 6-foot aluminum pop-up telescoping scaffold. Werner’s ATS-72 sell sheet (GM8870, ©2025 Werner Co.) describes a unit that packs down and rolls, then sets up for one person and telescopes to a working height. Werner recommends it for indoor use.
What Werner Lists
On the sell sheet, Werner lists these points for the ATS-72:
- A 500 lb load capacity for the combined weight of the user and materials, evenly distributed
- Five platform heights: 6 ft 6 in, 5 ft 8 in, 5 ft 1 in, 4 ft 3 in, and 3 ft 7 in
- An average reach height of up to 13 ft 1 in, which Werner figures for a 5 ft 7 in person with a 12 in vertical reach
- A 39-inch guardrail and toe board system
- A non-slip work platform with an extra-large trap door
- Built-in casters, adjustable outriggers, and a bubble level
- Pinch-resistant sections and color-coded labels for assembly
- Aluminum construction, with an approximate product weight of 132 lb
Werner’s user instructions for the ATS-72 also describe it as a single-user scaffold tested to the requirements of ANSI/SAIA A11.1. Those instructions, and the ATS-72 sell sheet (PDF), are the place to read current limits, setup, and indoor-use guidance. We have not put this scaffold through a hands-on performance review.
An Introduction, Not a Performance Review
This article introduces the product from our Instagram post and from Werner’s published information. It is not a claim about how the scaffold performs on a jobsite. Watch the clip and check Werner’s information before deciding whether it suits your work.
Where to Get It
The ATS-72 is listed at Home Depot (affiliate, we may earn a commission): Werner ATS-72 at Home Depot. Check that page for current pricing and availability.


Leave a Reply