3 SharkBite Plumbing Tools You Never Knew Existed

We may earn a commission from links on this page. Affiliate disclosure

Man holding a yellow SharkBite deburring and depth gauge tool, and the same tool next to a short piece of copper pipe

Disclosure: SharkBite sponsors the Tools In Action channel. Our opinions are our own.

SharkBite is famous for its fittings, but the brand also makes a set of small hand tools. These tools take care of the steps that decide whether a connection lasts. In this short we run through three of them: a pipe deburring and depth tool, the SharkBite removal tool, and a PEX cutter.

Tool 1: Pipe Deburring and Depth Tool

What it is: A small yellow tool that does two jobs. It cleans up the cut end of the pipe, and it shows you exactly where to mark the insertion depth.

SharkBite’s current version is the SharkBite Max Depth & Deburr Tool. On sharkbite.com, SharkBite lists it as SKU UR702A for 1/2 in., 3/4 in. and 1 in. pipe. It’s yellow, made of nylon, compatible with SharkBite 1st Gen and SharkBite Max fittings, and works on PEX, copper, CPVC and PE-RT pipe. SharkBite also lists an orange UXLG03 for 1-1/4 in. to 2 in. pipe.

What the video shows: We take a copper pipe and use the 1/2 in. side of the tool. A few spins, and the pipe is nicely deburred. Then, with the tool still on the pipe, we take a Sharpie and mark where the SharkBite fitting needs to go.

Why it matters: As we say in the video, getting the proper depth is very important when you’re installing SharkBite fittings. SharkBite says a rough pipe end can damage the O-ring, and a pipe that isn’t pushed in far enough only makes a partial seal. SharkBite’s instructions are to rotate the tool clockwise at least ten times, then mark the depth.

Tool 2: The SharkBite Removal Tool

What it is: A squeeze-style tool for releasing a SharkBite push-to-connect fitting from the pipe. SharkBite sells this style as Disconnect Tongs, in 1/2 in., 3/4 in. and 1 in. sizes (U711A, U713A and U715A). They’re stainless steel, color coordinated by size, and made for one-handed use in tight spaces.

What the video shows: We’ve shown this tool before, and we still think it’s ingenious. SharkBite fittings don’t come apart easily, and that’s the point. Put the tool on, squeeze gently, and you can pull the fitting off with no damage. The fitting can be reused. We put it right back on the pipe, and it’s tight again.

Tool 3: PEX Cutter

What it is: A cutter made for PEX pipe. SharkBite’s PRO PEX Cutter (SKU 25880 on sharkbite.com) cuts 1/4 in. to 1 in. PEX and PE-RT. It has a replaceable V-shaped blade, and SharkBite says flats on the cutting cavity keep the pipe straight while you cut.

What the video shows: What we like about this cutter is that you get straight cuts every time. With a lot of cutters you have to eyeball the pipe to keep it square. This one more or less aligns itself, so you can fly through the work.

Takeaways From the Video

What we liked:

  • All three are small hand tools that fix the most common causes of a bad connection: burrs, wrong depth and crooked cuts.
  • The deburr tool does two jobs in one.
  • The removal tool lets you fix a mistake without cutting the fitting out.
  • The PEX cutter makes square cuts without fussing.

Things to keep in mind:

  • Depth marks are different for SharkBite Max and 1st generation fittings. Use the correct side of the tool for the fitting you’re installing.
  • Removal tools are sized. Match the tool to the fitting.
  • A PEX cutter is for PEX and similar plastic pipe. Use a tubing cutter for copper.

Who It’s For

If you install SharkBite fittings, even occasionally, these three tools belong in your bag. Homeowners will get more reliable repairs, and pros will move faster with fewer callbacks. Most SharkBite failures come down to installation, and these tools are built to prevent the usual mistakes.

Watch the short above and tell us in the comments: which tool do you like best?

Where to buy: SharkBite Max Depth & Deburr Tool | SharkBite PRO PEX Cutter

Leave a Reply

Your email address will not be published. Required fields are marked * First-time comments are reviewed before they appear.

Comment on FacebookJoin the conversation on our Facebook page.

You are the influencer. Post it to 4.4 million followers.

Hit record. We’ll handle the rest.

Upload your review