SharkBite PEX Press Hand Tool: Pro Connections Without an Expensive Tool

We may earn a commission from links on this page. Affiliate disclosure

PEX press fitting held in a hand, then pressed onto red PEX pipe on a metal table

Disclosure: SharkBite sponsors the Tools In Action channel. Our opinions are our own.

https://www.instagram.com/reel/DY45EU5o5GJ/

Press connections have always been a pro thing. The fittings are fast and reliable, but the battery press tools you see on jobsites usually cost a couple thousand dollars or more. In this reel we show that you can make the same kind of connection with SharkBite’s new PEX Press fittings and a hand tool.

What It Is

SharkBite PEX Press is SharkBite’s press fitting system for PEX-a and PEX-b pipe. As we say in the video, it covers everything from manifolds to couplings to swivel adapters. SharkBite’s PEX Press brochure highlights three features on every fitting:

  • A pre-attached stainless-steel sleeve that stays locked on, so there are no loose rings.
  • Three viewing windows that show the pipe is fully inserted before you press.
  • A built-in locator ridge that lines the tool up for a consistent press.

The tool in this video is SharkBite’s PEX Press hand tool. SharkBite sells it as the PEX Press Hand Tool Kit. On sharkbite.com, SharkBite describes it as a lightweight, all-in-one tool for 1/2 in., 3/4 in. and 1 in. PEX Press fittings. It has quick-change press heads, composite handles to reduce fatigue, and a GO/NO-GO gauge to verify every connection. SharkBite’s brochure lists it as SKU 33478Z, “1/2 in., 3/4 in., 1 in. Multi-Head Hand Tool.”

What the Video Shows

We start with a bag full of PEX Press couplings. The first thing we point out is that the metal rings are captured. Pick one up, and both rings are still in place. You won’t be digging around in the bottom of a bucket for a lost sleeve.

Then Eric makes a connection. He slides the red PEX into the coupling, and you can see the red pipe through the viewing holes, so he knows it’s all the way in. He sets the hand tool on the fitting, and it lines up automatically on the ridges. One press, and it’s done.

We pull the tool off and take a look at the crimp. It’s clean and even, and the pipe is still showing red in the windows. As we say in the video, as long as you see red, you know you’re good to go. The other ring is still captured on the opposite end, ready for the next connection.

The punch line: professional results, and you didn’t need a $3,000 tool to get them.

Takeaways From the Video

What we liked:

  • No big tool required. The hand tool brings press connections within reach of homeowners and small shops.
  • No lost rings. Captured sleeves make the job cleaner and faster.
  • Visual confirmation. Seeing the pipe color in the windows takes away the “is it in all the way?” worry.
  • Self-aligning. The locator ridge does the lining up for you.

Things to keep in mind:

  • Check your presses. SharkBite includes a GO/NO-GO gauge with the hand tool kit. Its instructions recommend checking calibration daily, at least on the first and last presses of the day.
  • Don’t double-press. SharkBite’s install instructions say not to interrupt the press cycle and not to press a connection more than once.
  • Cut square. SharkBite says to use a PEX cutter for a square, clean cut, not a saw.
  • Hand vs. battery. A hand tool takes more effort per press than a battery tool. That’s fine for repairs and small projects, but on a big job it adds up.
  • SharkBite also says PEX Press fittings work with tools specified for ASTM F3347 and F3348 fittings, so if you already own a compatible press tool, you can use it.

Who It’s For

The SharkBite PEX Press Hand Tool Kit is a great fit for homeowners and DIYers who want pro-style PEX connections on a basement, bar or bathroom project without buying a battery press tool. It’s also a smart backup for plumbers who want a press option on the truck that doesn’t need a charged battery.

Watch the reel above, and check out our full SharkBite PEX Press review on YouTube for a longer look at the system.

Where to buy: SharkBite PEX Press Hand Tool Kit | SharkBite PEX Press fittings

Leave a Reply

Your email address will not be published. Required fields are marked * First-time comments are reviewed before they appear.

Comment on FacebookJoin the conversation on our Facebook page.

You are the influencer. Post it to 4.4 million followers.

Hit record. We’ll handle the rest.

Upload your review