Archived from the Tools In Action forum (Woodworking). This thread is read-only.
Started the scrapbook station today, but what I’m calling the paper tower.
[External image (uploads.tapatalk-cdn.com), not copied]
Jimbo
Sent from my iPhone using Tapatalk
Looks good Jimbo, you going to be done by Valentine’s Day? What are you using for the dividers. Hardboard?
John, Sent from my iPad using Tapatalk[emoji848]
Looks great thus far, I bet the Kreg jig is going to get a workout on this project.
Yea I went with hard board for the paper shelvesGlasseyi wrote:
Looks good Jimbo, you going to be done by Valentine’s Day? What are you using for the dividers. Hardboard?
John, Sent from my iPad using Tapatalk[emoji848]
Jimbo
Sent from my iPhone using Tapatalk
Didn’t know u scrapbook jimbo. Looks good
That’s my other secret addiction!
Jimbo
Sent from my iPhone using Tapatalk
looking good jimbo, are those hardboard trays gonna hold up with a bunch of paper on them, guess you could run a 1″x1″ across the middle about half way in the shelf if they start to bend…..
comp56 wrote:
looking good jimbo, are those hardboard trays gonna hold up with a bunch of paper on them, guess you could run a 1″x1″ across the middle about half way in the shelf if they start to bend…..
Yes she won’t have a whole lot of paper other than individual sheets on the shelves, all the heavier paper pads will be on the bottom, if she listens…
Jimbo
Sent from my iPhone using Tapatalk
looking good bro
Do they really ever listen
Looking good Jimbo!
chadlanthier wrote:
Do they really ever listen
Only after they break it, you fix it, they break it again, you fix it, they break it again, and you can’t fix it, so you buy a new one, they break it, you fix it… ah shit your right…
Looking great Jimbo. I liked the video with the Bosch colt cutting the slots for the shelves.
Your preaching the gospel of women, jimboslice.
Jimbos1ice wrote:
Only after they break it, you fix it, they break it again, you fix it, they break it again, and you can’t fix it, so you buy a new one, they break it, you fix it… ah shit your right…
and yet they have the gull to start questioning your ability somewhere in the middle of the 5 and 6th fix too…..
years ago when we first got married we had a bunch of plants on a shelf above the TV, told the wife 50 times to move them but nooooooooooo…….wait til she over waters them and smokes the TV ……..then we will move them…..
looking good bro,I really need to get a Kreg jig setup.
Looking good!
Fazzman wrote:
looking good bro,I really need to get a Kreg jig setup.
Have a look at the Porter Cable Jig, I think it’s a ton better. I hope to do a review of it soon. I just bought another one, has I gave my old one to friend. They just adopted a baby, and he has a ton of projects he wants to make for her nursery.
I’ve heard a lot good about it, never seen it in stores though
Jimbo
Sent from my iPhone using Tapatalk
Yeah same hear Jim, I hear everyone loves it over the Kreg, but I have never used it.Jimbos1ice wrote:
I’ve heard a lot good about it, never seen it in stores though
Jimbo
Sent from my iPhone using Tapatalk
John, Sent from my iPad using Tapatalk[emoji848]
Nice job Jimbo, looking pretty cool. She will love it!
[External image (uploads.tapatalk-cdn.com), not copied]
Remember way back when when I started this?? Sometimes we all know things get pushed aside, back in action on it, finally got some paint picked out, interior will be that light blue exterior will be the gray, got the wood for the work surface and main storage.
Jimbo
Sent from my iPhone using Tapatalk
[External image (uploads.tapatalk-cdn.com), not copied]
Jimbo
Sent from my iPhone using Tapatalk
Looks great so far brotha!
Nice choice in paint colors. Can’t wait to see your scrapbook projects.
Mondo1310 wrote:
Nice choice in paint colors. Can’t wait to see your scrapbook projects.
You mean his fiancé’s ha… maybe she’ll coax him in to doing some if it requires power tools!
Sent from my SCH-I535 using Tapatalk
KnarlyCarl wrote:
Just now, KnarlyCarl said:You mean his fiancé’s ha… maybe she’ll coax him in to doing some if it requires power tools!
Sent from my SCH-I535 using Tapatalk
Sure it is for the “fiancé”.
She did pick out the paint colors!! The only thing I could scrap book is dirty magazines…
Jimbo
Sent from my iPhone using Tapatalk
JimboS1ice wrote:
9 minutes ago, JimboS1ice said:She did pick out the paint colors!! The only thing I could scrap book is dirty magazines…
Jimbo
Sent from my iPhone using Tapatalk
Old HD ads
Mondo1310 wrote:
13 hours ago, Mondo1310 said:Old HD ads
JimboS1ice wrote:
13 hours ago, JimboS1ice said:She did pick out the paint colors!! The only thing I could scrap book is dirty magazines…
Jimbo
Sent from my iPhone using Tapatalk
Careful, or Eric might make a “Scrap Booking” section on the TIA Forum lol..
[External image (uploads.tapatalk-cdn.com), not copied]
Jimbo
Sent from my iPhone using Tapatalk
JimboS1ice wrote:
6 hours ago, JimboS1ice said:
Someone scored some brownie points.
Mondo1310 wrote:
Someone scored some brownie points.
Hopefully he scored more than just brownie points!
Sent from my SM-N900V using Tapatalk
[External image (uploads.tapatalk-cdn.com), not copied]
Jimbo
Sent from my iPhone using Tapatalk
You know, the more I think about it, I might make one of those tall paper holder thingie for my Scroll Saw Patterns and Woodworking plans for current projects.
WigWagWorkshop wrote:
You know, the more I think about it, I might make one of those tall paper holder thingie for my Scroll Saw Patterns and Woodworking plans for current projects.
Would fit sandpaper great too to mount on the wall
nice, good job….
Awesome work Jimbo, that’d be awesome for my wife in Stampin’ Up. Great idea dude, thanks!
Fiancé did a great job on the painting it.
Mondo1310 wrote:
Fiancé did a great job on the painting it.
I painted this one! Still painting too… Don’t have. A picture but the outsides all grey and the work surface will get chevrons with that blue color.
JimboS1ice wrote:
I painted this one! Still painting too… Don’t have. A picture but the outsides all grey and the work surface will get chevrons with that blue color.
You could have just left us believing it was her, then if someone didn’t like it you could just blame her lol
Sent from my SCH-I535 using Tapatalk
KnarlyCarl wrote:
2 hours ago, KnarlyCarl said:You could have just left us believing it was her, then if someone didn’t like it you could just blame her lol
Sent from my SCH-I535 using Tapatalk
Can still blame her!!
[External image (uploads.tapatalk-cdn.com), not copied]
FYI frog tape chevron is awesome but tedious as shit!
Jimbo
Sent from my iPhone using Tapatalk
PVC useful for so many things, that thing looks nice! Are shelves going in that larger square portion of the case?
Sent from my SCH-I535 using Tapatalk
KnarlyCarl wrote:
PVC useful for so many things, that thing looks nice! Are shelves going in that larger square portion of the case?Sent from my SCH-I535 using Tapatalk
Yes sir! Not sure on the configuration yet, I have one shelf that’ll run the whole length
That looks amazing!
great job Jimbo!
[External image (uploads.tapatalk-cdn.com), not copied]
Finally done!!
Jimbo
Sent from my iPhone using Tapatalk
Nice work Jimbo,,,,
Great Job!!
What is she going to use the tubes (PVC) for in the top?