Archived from the Tools In Action forum (Power Tools). This thread is read-only.
Instead of posting threads every time we buy something awesome for ourselves why not have it here?
So to start off I got tired of my average ryobi jig saw and picked up a Bosch js572ebl from HD. With purchases over 125 you get 25 off. For 250 I got the saw kit with the L-boxx 2. Can’t wait to outfit to work!
Jimbo
Sent from my iPad using Tapatalk
No tools, but I did buy Star Wars Ep 4.5 and 6 to get my daughter up to speed before episode 7 comes out.
Great jigsaw Jimbo!
I bought a mobile base for my Rikon 10-325 and a some more Bessey K Body clamps.
And…….The Ultimate Dust Deputy for the Festool CT Dust Collectors. I should hopefully have it Wednesday and can assemble it that day. It comes with a systainer base to lock onto my Midi. Pretty stoked.
You know Jimbo, that Bosch is one of the top line jig saws and I ended up getting the Carvex. I will say, had I not had the DC unit I may have gone with the Bosch. That really is a great jigsaw.
chrisk wrote:
You know Jimbo, that Bosch is one of the top line jig saws and I ended up getting the Carvex. I will say, had I not had the DC unit I may have gone with the Bosch. That really is a great jigsaw.
Yea I did some research and looked at a Carvex but I don’t know if my finances can handle a festool yet because one just won’t be enough lol, but I like a lot of the features in the Bosch, so I’ll treat it good.
Jimbo
Sent from my iPhone using Tapatalk
Nice set there. Every time I look at dremel bits I want to buy some, but remember I already have pretty much every bit they make. Those little diamond points can take care of some tough problems.
Came close to buying one of the $100 M18 impact driver kits or a 2763 bare tool, but I just can’t bring myself to buy anything for mysel this time of year. I ended up with a couple of LED replacement bulbs for the wall lights in the stairs. Yay.
You already have the 3/8 m18 fuel don’t you? If you do I would highly recommend the 2763. I’ve had mine for about a month and I still smile every time I use it.BK13 wrote:
Came close to buying one of the $100 M18 impact driver kits or a 2763 bare tool, but I just can’t bring myself to buy anything for mysel this time of year. I ended up with a couple of LED replacement bulbs for the wall lights in the stairs. Yay.
kornomaniac wrote:
Got myself something new !
Refurbished model from out of our Makita representative demonstration van.IMG_20151214_111250.jpg
Nice buy, at the FIre a department we use Husqavarna saws. Funny we call them either a K12 or a Partners saw even though those are other brands. Really awesome saw but those things are beasts.
Jimbo
Sent from my iPhone using Tapatalk
looks like a Beast!! nice buy!
NicholasShetley wrote:
You already have the 3/8 m18 fuel don’t you? If you do I would highly recommend the 2763. I’ve had mine for about a month and I still smile every time I use it.
NicholasShetley wrote:
You already have the 3/8 m18 fuel don’t you? If you do I would highly recommend the 2763. I’ve had mine for about a month and I still smile every time I use it.
Yup. Just a bad time of the year for buying new toys for myself. I’ll eventually get one, and a 2655b, just not right now.
After shooting the video the mystery part was the smaller Allen key!
Jimbo
Sent from my iPhone using Tapatalk
jimboslice wrote:
Nice buy, at the FIre a department we use Husqavarna saws. Funny we call them either a K12 or a Partners saw even though those are other brands. Really awesome saw but those things are beasts.
Jimbo
Sent from my iPhone using Tapatalk
Bigmikez wrote:
looks like a Beast!! nice buy!
Yeah i really like these powerfull machines 😀
Makita/dolmars start easy !
Dont mind all the dust 😀 Wasnt using water and not windy enough ! =p
I wanted to get a couple batteries for my 18v Ridgid stuff (fan, radio, drills, drivers, circ saw, recipe saw) and for $50 more than I was going to spend I upgraded a couple of my collection and I got this Brushless set:
Already used the compact drill, very nice.
[External image (images.tapatalk-cdn.com), not copied]
Shuutr wrote:
I wanted to get a couple batteries for my 18v Ridgid stuff (fan, radio, drills, drivers, circ saw, recipe saw) and for $50 more than I was going to spend I upgraded a couple of my collection and I got this Brushless set:
Already used the compact drill, very nice.
[External image (images.tapatalk-cdn.com), not copied]
Nice let us now how that saw is, what is the blade size?
Jimbo
Sent from my iPhone using Tapatalk
Its 7 1/4″ blade.
No tool per se, but bought another dewalt tough system box.
Haven’t gotten it yet but it is coming for Xmas can’t wait [External image (images.tapatalk-cdn.com), not copied][External image (images.tapatalk-cdn.com), not copied]
Sent from my SCH-I545 using Tapatalk
I bought a new Master force router combo. And built a router to go with it. Really like this router
Sent from my iPhone using Tapatalk
Well I didn’t buy this but it was bought for me by my bro, he called me this morning and asked if I had one already and said that some lady at a yard sale was selling it for $75 he offered $60 she took it and gave it to me a lil while ago it’s still brand freakin new I don’t think it was used not one time. Thanks bro!!
I picked up the Milwaukee two screwdriver special at HD.
It included the stubby with multiple bits and the ratcheting full size for $14.
DiverDn wrote:
I picked up the Milwaukee two screwdriver special at HD.
It included the stubby with multiple bits and the ratcheting full size for $14.
How are they? I walk past them and think about them every time I run in there
Jimbo
Sent from my iPhone using Tapatalk
I picked up the Channellock 426 6-1/2″ Tounge and Groove Pliers. These pliers are small yet big enough to work. Useful everywhere. Fits nicely on my back pocket or tool belt without adding too much weight. I have a set of the larger pliers however this set is lighter and can take care of most tasks.
dropkickguy wrote:
I picked up the Channellock 426 6-1/2″ Tounge and Groove Pliers. These pliers are small yet big enough to work. Useful everywhere. Fits nicely on my back pocket or tool belt without adding too much weight. I have a set of the larger pliers however this set is lighter and can take care of most tasks.
I have a Milwaukee tongue and grove pliers around that size I keep in my electrical bag.
Jimbo
Sent from my iPhone using Tapatalk
. How u like thise Jimbo? I’ve been so close to picking those up?jimboslice wrote:
I have a Milwaukee tongue and grove pliers around that size I keep in my electrical bag.
Jimbo
Sent from my iPhone using Tapatalk
Bigmikez wrote:
. How u like thise Jimbo? I’ve been so close to picking those up?
They’re not too bad, pretty solid quality, work good as a knock out and reaming tool for junction boxes.
Jimbo
Sent from my iPhone using Tapatalk
Bought some nails for the finish nailer. 🙂
I was contemplating that kit. Either that one or the Bosch colt with plunge base. Do you feel the size will keep you from getting into certain spots?ryanjbutler1 wrote:
I bought a new Master force router combo. And built a router to go with it. Really like this router
Sent from my iPhone using Tapatalk
Sent from my XT1254 using Tapatalk
jimboslice wrote:
How are they? I walk past them and think about them every time I run in there
Jimbo
Sent from my iPhone using Tapatalk
Feels solid enough. The stubby is not ratcheting, but the full size is.
Good variety of bits and the full size has a good grip on it.
I think it will prove to be a decent buy.
I’m hoping they go lower than 14 my store has a bunch
Jimbo
Sent from my iPhone using Tapatalk
I’m going to buy something one of these days, my buying days are on hold until further notice…….this memo issued from “The Comp56 bank of wife”
I’m a cabinet installer and I was tired of using some really REALLY OLD hand me down tools that barely worked…so i took advantage of the Black Friday deals that just passed…picked up some decent stuff 😉 😉
pepin wrote:
I’m a cabinet installer and I was tired of using some really REALLY OLD hand me down tools that barely worked…so i took advantage of the Black Friday deals that just passed…picked up some decent stuff 😉 😉
Wow, you cleaned house with the tool deals Pepin!!
Pepin glad to see u back man!! And nice haul u got there!!
Nice haul
Jimbo
Sent from my iPhone using Tapatalk
didn’t buy any tools today, but i did return $77 dollars worth of stuff at lowes so now its time to spend it!
I bought this set of Carlyle sockets for my dad as a Christmas present. His set of 3/8 metric deep sockets weren’t nearly as big and were 12 point so I felt an upgrade was needed.
Nice haul! I want that table saw…and the miter saw!
Real nice haul Pepin
Didn’t get these today but my screwdrivers finally came in from kctoolco and very impressed with the weras so far. I also picked up a few things from HD last week. Spring clamps, clamps, and husky t handle hex.
Sent from my XT1254 using Tapatalk
I have those same Lenox holesaws,they are pretty good.
I bought the same lenox set from Menard’s as a black Friday deal.
Sent from my XT1254 using Tapatalk
Edit…never mind
No I have not ran into any trouble with it yet. It is a little but the for the price and what you get you cant beat it. I have it set up in my router table most of the time. It allows you with the kreg insert plate to adjust everything from the top. You do have go unlatch it so move up and down but you can change the bits from above without pulling out the router.rrich1 wrote:
I was contemplating that kit. Either that one or the Bosch colt with plunge base. Do you feel the size will keep you from getting into certain spots?
Sent from my XT1254 using Tapatalk
Sent from my iPhone using Tapatalk
Kornomaniac that saw is sick! As for me I’m trying so hard to not buy any new tools until after Xmas. I want to see what red and yellow come out with in January 16 !!
Thanksryanjbutler1 wrote:
No I have not ran into any trouble with it yet. It is a little but the for the price and what you get you cant beat it. I have it set up in my router table most of the time. It allows you with the kreg insert plate to adjust everything from the top. You do have go unlatch it so move up and down but you can change the bits from above without pulling out the router.
Sent from my iPhone using Tapatalk
Sent from my XT1254 using Tapatalk
