Tool of the day is my [External image (images.tapatalk-cdn.com), not copied]
Sent from my iPhone using Tapatalk
Great tool.. That thing is a beast, makes all the cuts i need and don’t have to pull the cord out.[emoji3]rees332 wrote:
Tool of the day is my [External image (images.tapatalk-cdn.com), not copied]
Sent from my iPhone using Tapatalk
Sent from my VS985 4G using Tapatalk
swaglosrevival wrote:
I feel the same way. And def if the the material is more than 1 1/2 material. They eat through batteries. Prolly need a 5 or 6ah to get any good results out of cordless
A 9ah will do.lol
its is a very nice toolPROTOOLNUT wrote:
Nice one Reese, love that Milwaukee too sexyness! 😛
Sent from my iPhone using Tapatalk
My tools of the day today were an Oxy/Acetylene torch and a 10ton jack & ram. Unfortunately I can’t take pictures at work or else I would have made a really cool video of how they were used to bend some steel back into shape.
nice ChrisChris wrote:
My tools of the day today were an Oxy/Acetylene torch and a 10ton jack & ram. Unfortunately I can’t take pictures at work or else I would have made a really cool video of how they were used to bend some steel back into shape.
Sent from my iPhone using Tapatalk
[External image (images.tapatalk-cdn.com), not copied][External image (images.tapatalk-cdn.com), not copied]
Installing a sump pump. This thing is very old and used well. It’s my trusty
nice drill that is my friendswaglosrevival wrote:
[External image (images.tapatalk-cdn.com), not copied][External image (images.tapatalk-cdn.com), not copied]
Installing a sump pump. This thing is very old and used well. It’s my trusty
Sent from my iPad using Tapatalk
Thanks mane!rees332 wrote:
nice drill that is my friend
Sent from my iPad using Tapatalk
My tool of the day is my Dewalt impact driver
nice tool Logan its look a well worked toolLogan p wrote:
My tool of the day is my Dewalt impact driver
Sent from my iPhone using Tapatalk
swaglosrevival wrote:
Installing a sump pump. This thing is very old and used well. It’s my trusty
That’s an oldie but a goodie, I have an old Bosch that’s about the same size but doesn’t work :/
Sorry to hear that. Could it be a problem with the cord?
No everything works and makes the right noises but it has no power when chipping or drilling, I changed the brushes thinking that was the problem but it didn’t fix it :/
Oh dang that sucks
swaglosrevival wrote:
Oh dang that sucks
I have had quite a few Bosch failures :/
I’m not surprised. I have a small bosch d handle sds. Did some demo on a bathroom tile. That old mud floor subway tile, and it burnt out on me.
R.I.P (Rest In Pieces) Bosch
Tool of the day today is [External image (images.tapatalk-cdn.com), not copied]
Sent from my iPhone using Tapatalk
I decided to snap a few shots of the work today, mainly just tinning out my forest alot of work left to do plus the humid weather doesn’t help either with chainsaw pants. Tools is Stihl 362
[External image (i.imgur.com), not copied]
[External image (i.imgur.com), not copied]
[External image (i.imgur.com), not copied]
PROTOOLNUT wrote:
Nice chainsaw, Stihl is a good brand and they make a good saw. This ones the perfect size for doing small stuff, when you don’t want to lug around a 30 pound chainsaw. Good deal! 🙂
Very true, I gave her a deep clean Friday evening she was caked in Sika Spruce sap like the one in the photo, a very thick sticky sap. I do however have a massive itch and its called a 661 magnum local dealer might give me a deal on it.
Today’s “Tools” of the day were my Dewalt 20v Framing Nailer and Circular Saw!erformed admirably as usual. I have to admit, my 20v Dewalt saw is way better than my old M18 saw which I never took a liking to. I’ll eventually get the Makita brushless but this brushed saw cuts through OSB and PT no problem. Uses hardly any battery juice. Unlike my Dewalt framer which killed a 3.0 in no time!
. Man Bro every time I’m in HD I pass by that nailer and and just hold it for a couple seconds lol! And I agree on the circular saw from Dewalt bro it’s a workhorse for being brushed I haven’t had any issues with it and by the way the shops lookin nice brotha!ChrisK1970 wrote:
Today’s “Tools” of the day were my Dewalt 20v Framing Nailer and Circular Saw!erformed admirably as usual. I have to admit, my 20v Dewalt saw is way better than my old M18 saw which I never took a liking to. I’ll eventually get the Makita brushless but this brushed saw cuts through OSB and PT no problem. Uses hardly any battery juice. Unlike my Dewalt framer which killed a 3.0 in no time!
Does this count as Tool of the day? Sman3 Manifold
Totally a tool, nice little unit. How do you like it and have you tried the test 550? If you have, how does it compare?Justin Hernandez wrote:
Does this count as Tool of the day? Sman3 Manifold
Sent from my LG-V410 using Tapatalk
Ok what is that? (Pardon my ignorance)Justin Hernandez wrote:
Does this count as Tool of the day? Sman3 Manifold
I’m looking into this gun my Sherwin Williams rep faithful throws it in my face. How long can it run on a charge? Does it have any clog issues?mtnkid85 wrote:
This was my tool of the day yesterday! Finishing up an exterior and had to shoot two doors and two shutters, the perfect proshot project.image.jpg
jrsalas wrote:
Totally a tool, nice little unit. How do you like it and have you tried the test 550? If you have, how does it compare?
Sent from my LG-V410 using Tapatalk
It sounds like you know your stuff have you done any A/C work before? I like it haven’t had any problems with it, so much easier than analog gauges, a lot of YouTube guys swear by the 550’s. Not to many people even have digital gauges here, that’s why I mentioned YouTube theirs some good techs on there. The A/c guys here are a joke. Everything is hoseless and wireless now I’m looking to upgrade soon
swaglosrevival wrote:
Ok what is that? (Pardon my ignorance)
Just because you don’t know doesn’t make you ignorant 🙂 Its an Air Conditioning manifold for checking the system pressures
mtnkid85 wrote:
This was my tool of the day yesterday! Finishing up an exterior and had to shoot two doors and two shutters, the perfect proshot project.image.jpg
I wish I did more painting to justify purchasing one, How do you like it??
Oh ok lolJustin Hernandez wrote:
Just because you don’t know doesn’t make you ignorant 🙂 Its an Air Conditioning manifold for checking the system pressures
I know refrigeration, but basically the same concept: refrigerant(r22, r507 and ammonia i work with), and 4 main component’s – compressor, condenser expansion valve, and evaporator. The ac at my facility office broke down and found the copasitator had taken a dump so replaced it and installed a new fan motor to go with it. Just wished i had a gadget like yours, seems a lot more simple than the gauges. Other then that, no have never done ac work, id like to though.Justin Hernandez wrote:
It sounds like you know your stuff have you done any A/C work before? I like it haven’t had any problems with it, so much easier than analog gauges, a lot of YouTube guys swear by the 550’s. Not to many people even have digital gauges here, that’s why I mentioned YouTube theirs some good techs on there. The A/c guys here are a joke. Everything is hoseless and wireless now I’m looking to upgrade soon
Sent from my VS985 4G using Tapatalk
jrsalas wrote:
I know refrigeration, but basically the same concept: refrigerant(r22, r507 and ammonia i work with), and 4 main component’s – compressor, condenser expansion valve, and evaporator. The ac at my facility office broke down and found the copasitator had taken a dump so replaced it and installed a new fan motor to go with it. Just wished i had a gadget like yours, seems a lot more simple than the gauges. Other then that, no have never done ac work, id like to though.
Sent from my VS985 4G using Tapatalk
Cool, it seems like refrigeration and A/C work is two different guys but some people do both its more or less the same thing. Those damn capacitors are the biggest problem there always going bad. You should give ac work a try
swaglosrevival wrote:
I’m looking into this gun my Sherwin Williams rep faithful throws it in my face. How long can it run on a charge? Does it have any clog issues?
Justin Hernandez wrote:
I wish I did more painting to justify purchasing one, How do you like it??
It is a love/hate relationship. When it works it is fantastic, the idea of it is fantastic, however in practice it is… not fantastic. I really wish Graco would team up with ANY other tool company with a well established cordless line. Because its biggest down fall is the batteries. They are only 2.4Ah packs that are the same size as all the other companies 5.0Ah packs and in the three years Ive owned it Ive killed two batteries. Oh yea and theyre $100 a pop and so far Ive gotten no warranty support.
The sprayer really needs to be babied along, at times it wont spray, it just “stalls out” as if the batteries don’t have enough “umph” to get the motor started, but it will prime itself so with a certain degree of trickery I can usually get it to come back on and finish out spraying.
It is without a doubt my most babied tool as well, I treat the thing like gold.
The Good side of it is, it is convenient. If you’ve got less than a gallon to spray, then the Proshot is the fastest/easiest way to do it. I certainly would not suggest it as your only sprayer, I own three other sprayers so the Proshot only sees limited/specialized use.
So like a said, it is without a doubt my favorite piece of S**T tool I own! It could be so good…
Sorry to hear that I seen a lot of good reviews on it on YouTube, but maybe they got the tool for free or being paid to review it. I would use it mainly for doors and maybe some trim. I see a lot of good tools but when the company teams up with another company it becomes junk, are the batteries made by Graco?
Lol ok so summary less than a gallon is cool. Which is all I’m looking for. Thanks a lot for your review! I think I will wait for the tech to advance a little more. I see other companies working on cordless sprayers.mtnkid85 wrote:
It is a love/hate relationship. When it works it is fantastic, the idea of it is fantastic, however in practice it is… not fantastic. I really wish Graco would team up with ANY other tool company with a well established cordless line. Because its biggest down fall is the batteries. They are only 2.4Ah packs that are the same size as all the other companies 5.0Ah packs and in the three years Ive owned it Ive killed two batteries. Oh yea and theyre $100 a pop and so far Ive gotten no warranty support.
The sprayer really needs to be babied along, at times it wont spray, it just “stalls out” as if the batteries don’t have enough “umph” to get the motor started, but it will prime itself so with a certain degree of trickery I can usually get it to come back on and finish out spraying.
It is without a doubt my most babied tool as well, I treat the thing like gold.
The Good side of it is, it is convenient. If you’ve got less than a gallon to spray, then the Proshot is the fastest/easiest way to do it. I certainly would not suggest it as your only sprayer, I own three other sprayers so the Proshot only sees limited/specialized use.
So like a said, it is without a doubt my favorite piece of S**T tool I own! It could be so good…
