Archived from the Tools In Action forum (Dewalt). This thread is read-only.
well this might be a thing. Portable power station meets tough system.
Very cool……why did they not come out with this first?
I’m not sure but it is in a new insights survey.
Dewalt might ask us to remove this as this was part of a confidential survey
First rule of fight club…… Shhhhhh
How do you get to do surveys like that??
Sent from my iPhone using Tapatalk
It wants to know what could be improved or changed. This is a hard one. Also appears to have faster charging than the other power station. 4 4.0’s in 1 hours seems faster I think.
Kaman wrote:
Just now, Kaman said:How do you get to do surveys like that??
Sent from my iPhone using Tapatalk
you have to sign up for DeWALT Insights.
Jronman wrote:
30 minutes ago, Jronman said:you have to sign up for DeWALT Insights.
AND AGREE TO NOT DISCLOSE ANYTHING YOU SEE OR ANSWER QUESTIONS ON….
Grumpy MSG wrote:
24 minutes ago, Grumpy MSG said:AND AGREE TO NOT DISCLOSE ANYTHING YOU SEE OR ANSWER QUESTIONS ON….
I guess I missed this. Should I takes this down?
Jronman wrote:
15 minutes ago, Jronman said:I guess I missed this. Should I takes this down?
My recommendation is, if you want to continue to participate in the surveys, follow the disclosure agreement and don’t disclose anything. It is not like DeWALT doesn’t look at sites like this and ask the moderators to remove content they don’t want out there before it is ready for the public. That said, they probably wouldn’t have to tough a time in finding out your Email and removing you from the insights program.
Just a thought…
I signed up for this a few months ago and never heard anything back, felt like I made a pretty compelling case but the pages are blank under the surveys pages.
=-/
There was another post from the insights thing about a DeWalt mower
KnarlyCarl wrote:
2 minutes ago, KnarlyCarl said:There was another post from the insights thing about a DeWalt mower
IIRC, that even had a screenshot with a picture of it and that wasn’t taken down immediately if at all.
Jronman wrote:
50 minutes ago, Jronman said:I guess I missed this. Should I takes this down?
To quote Grump, I agree. No need to take it down on our end yet but if you want to participate they could raise a stink. In the past, and Dewalt does sponsor, we had a serious issue come up and the post had to be taken down. The OP didn’t do anything wrong but we had to remove it. As far as now, we don’t have any reason to redact the post though 🙂
No pic showing anymore…but I did qualify and sign up for Dewalt Insights! Thanks for the tip!
Sent from my SM-T310 using Tapatalk
ChrisK wrote:
13 hours ago, ChrisK said:To quote Grump, I agree. No need to take it down on our end yet but if you want to participate they could raise a stink. In the past, and Dewalt does sponsor, we had a serious issue come up and the post had to be taken down. The OP didn’t do anything wrong but we had to remove it. As far as now, we don’t have any reason to redact the post though 🙂
I removed the screenshot but left the post. Hopefully it should be less of an issue now.
Jronman wrote:
Just now, Jronman said:I removed the screenshot but left the post. Hopefully it should be less of an issue now.
No prob bro. In all fairness we have had company call in a tizzy because a member reposted something or other that got leaked. Hard to get down on a guy reposting something that he sees on the internet!
ChrisK wrote:
1 minute ago, ChrisK said:No prob bro. In all fairness we have had company call in a tizzy because a member reposted something or other that got leaked. Hard to get down on a guy reposting something that he sees on the internet!
It was an easy mistake on my part. I wont post anything insights stuff again. We can just talk about the stuff after they come out.
Powers station and tough system should be cool
Sweet….thing is Dewalt should say something like …” we are working on these future items and we’ll keep you posted” to the general tool companies and let them advertise it……because a lot of people /companies (myself included) spend Enormous amounts of money on their tools and we should know what’s available and upcoming before wasting money on current options ,when better ones are months away……I will say this forum has saved me money by guys reviewing tools positively or negatively and allowing me to make an educated choice….I really appreciate it….and jronman ,thanks
I just joined insights too,,,I’m in…thanks , didn’t even know it existed. I hope I/we can influence Dewalt to improve tools where needed and make tools we need …also to take care of loyal customers first ,,like preorders…..love TIA forum
@Framer joe insight isn’t “hey random person, check out this secret product coming out next month, keep it to yourself!”. I believe it’s more like “hey random person, hypothetically, if we were to make this cool imaginary product we are showing you right now, how cool would that be? Cool enough to spend money on? How much money? Lots of money?” 😆
Take it your on insights @Bremon ? I’ll be more then happy to try to influence Dewalt into making quality professional cordless tools, I’ll give brutally honest opinions and recommendations on how to improve what they show me and what to develop…..at least I have a voice now representing framers/ construction guys …although a small voice….price to me doesn’t matter…Quality does..long lasting quality tools….
I wish they’d do more R&D based off of existing tools as much as new ones. Imagine if they’d listen to us about how to tweak or improve refresh tools to make them as perfect as they could be. Seems like every tool has that one little thing that just kills the potential that would be so simple to change, yet every version made from then on is practically exactly the same on the exterior.
Take the premium drill line for instance, why the hell are we still messing with those shit gear shifters that barely function when they’ve already produced tools with electronic ones that are sooooooooo much better? (3 speed impact, 3 speed impact wrench, etc…) I’d pay like $30 more bare tool without question.
I’m with you on that…ya it’s like I watch this (ave) on yt…companies will spend a lot on good components,then use a cheap shit piece where it matters…just build quality …we will pay …there are plenty of DIY companies…make professional tools last or improve what you already have ….good point