BMack37 wrote:
1 hour ago, BMack37 said:
More of these listed: http://www.ebay.com/itm/Fluke-27-FM-Digital-Multimeter-DMM-POWER-TESTED-/291940994627
Grabbed two.
Stercorarius wrote:
10 hours ago, Stercorarius said:Grabbed two.
I’m thinking of getting a second myself hmmmmm
20% off coupon, covers a lot of stuff: http://www.ebay.com/rpp/early-holiday-coupon/
Fluke 87V with case and leads for $155. 18 seller feedback and a couple bad feedback. Paypal should take care of you if you have an issue but buy at your own risk. This is a very good deal on one of the best DMMs on the market: http://www.ebay.com/itm/Fluke-87V-True-RMS-Multimeter-With-2-Probes-/282261894671
Decent deal: Fluke 87 III for $130 + shipping($9.45 to Tampa): http://www.ebay.com/itm/FLUKE-87-III-True-RMS-Multimeter-comes-w-new-test-leads-meter-voltmeter-tester-/252657075152?hash=item3ad38903d0:g:exkAAOSwB09YO6Je
Very good DMM. This one is either the late serial number or been upgraded to the LED backlight. The LED kit is like $30. The only things I don’t like about this meter compared to the 87V is lack of temperature, diode check doesn’t beep unless shorted(other Flukes do a short beep to let you know the diode is working) and the capacitance range is a lot lower. For $140 it’s a pretty good deal, these trade for $150-$170 or more…those generally are without probes and the old style backlight.
[External image (uploads.tapatalk-cdn.com), not copied]
https://www.ebay.com/itm/192039459208
Sent from my iPad using Tapatalk
BMack37 wrote:
On 11/10/2016 at 0:29 AM, BMack37 said:Fluke 27/FM used, untested for $15 shipped. http://www.ebay.com/itm/302134020629
These are relatively old meters, made in the USA. EXTREMELY robust, probably military surplus. It will likely still be in spec because Fluke generally doesn’t float out of spec. These normally sell used for $50+. 9 available, I doubt any will be available past Thursday.
I’m looking fairly often, but if you see any more of these for this price or any T5-600s let us know.
Fluke 87V with a Fluke case and the TL175 Chinese market probes. for $175: http://www.ebay.com/itm/Fluke-87-V-True-RMS-Multimeter-With-Case-And-Leads-/152350772824
Looks like the meter has a calibration sticker on it. Basically $175 is a really good price for the 87v, most selling for $200 or more for meters this clean without case and with well-used leads. The case is $30-50, leads are $15-30 for the Chinese market, ($28-35 is for the USA version). If I wasn’t broke and didn’t have two 87Vs, I’d have already bought this.
Gedore torx screwddriver set for $20 + $6.50 shipping(to Tampa) http://www.ebay.com/itm/Gedore-2163BTX-05-5-Piece-Torx-Screwdriver-Set-T10-T15-T20-T25-T30-/331914938032
CC: @JimboS1ice
BMack37 wrote:
Gedore torx screwddriver set for $20 + $6.50 shipping(to Tampa) http://www.ebay.com/itm/Gedore-2163BTX-05-5-Piece-Torx-Screwdriver-Set-T10-T15-T20-T25-T30-/331914938032
CC: @JimboS1ice
Dude! I just ordered a wiha torx set paid maybe less I don’t remember too much on that order to remember ha ha
Sent from my iPhone using Tapatalk
JimboS1ice wrote:
1 minute ago, JimboS1ice said:
Dude! I just ordered a wiha torx set paid maybe less I don’t remember too much on that order to remember ha ha
Sent from my iPhone using Tapatalk
I knew you were looking for a set, I would have bought this if I didn’t just buy the Felos.
BMack37 wrote:
I knew you were looking for a set, I would have bought this if I didn’t just buy the Felos.
Thanks bud yea I bought a bunch of stuff on kc the other day and had a sale in wiha set so it pushed me over for free shipping
Sent from my iPhone using Tapatalk
Dewalt 20v Max Grease Gun 137.89 free shipping
https://www.ebay.com/itm/222342045101
Sent from my iPhone using Tapatalk
Used proto 1/2″ ratchet s-400
$15.00 plus 6.80 shipping
https://www.ebay.com/itm/182383958346
Sent from my iPad using Tapatalk
Sweet deal.
DRIVE RATCHET 20″ Proto Professional 3/4″ Drive ratchet TOOL #5649 20 inch 39.99 + 15.99 shipping
Proto Professional 5685 3/4″ Drive Sliding T Handle Breaker Bar 20″ long 20.00 + 18.75 shipping
PROTO 6064-5 3/8″ DRIVE DIRECTIONAL INCH-POUND TORQUE WRENCH 40-200″ LBS 55.00 + 7.00 shipping
Genuine Proto J4749 Pear head 1/4″ Drive Ratchet. – 16.75 + 4.40 shipping
Wera Zyklop 8789 A T-Handle Square drive 1/4″ Head x 110mm T-Handle 17.76 + free shipping
Every time Jimbo posts killer deals…
NicolasRamos wrote:
Lol
Sent from my iPhone using Tapatalk
JimboS1ice wrote:
Just now, JimboS1ice said:
Lol
Sent from my iPhone using Tapatalk
I feel like the woman getting pelted with fliers! Also I may be buying that Proto 1/4″…
NicolasRamos wrote:
I feel like the woman getting pelted with fliers! Also I may be buying that Proto 1/4″…
Jump before its gone
Jimbo
sent from tapatalk
JimboS1ice wrote:
On 1/4/2017 at 6:38 PM, JimboS1ice said:
PROTO 6064-5 3/8″ DRIVE DIRECTIONAL INCH-POUND TORQUE WRENCH 40-200″ LBS 55.00 + 7.00 shipping
Mine cost like triple this. Jump on it you buffoons.
JimboS1ice wrote:
On 1/4/2017 at 6:37 PM, JimboS1ice said:
Proto Professional 5685 3/4″ Drive Sliding T Handle Breaker Bar 20″ long 20.00 + 18.75 shipping
Only $9 less than new
Stercorarius wrote:
5 minutes ago, Stercorarius said:Mine cost like triple this. Jump on it you buffoons.
On second thought used torque wrenches are questionable. I’d have to get it calibrated.
Stercorarius wrote:
22 hours ago, Stercorarius said:Only $9 less than new
shipping was stupid on it
GEDORE Combination Pliers 8215-180 Austria 7 inch 22.50 + 3.40 shipping – NEW
Gedore 8210-180 JC Combination Pliers 180 mm 2 Component Handle Austria 18.00 + 4.00 shipping – NEW
Gedore 8132-140 JC Telephone Pliers Needle Nose 140mm Austria 16.00 + 4.75 shipping – NEW
JimboS1ice wrote:
3 hours ago, JimboS1ice said:
GEDORE Combination Pliers 8215-180 Austria 7 inch 22.50 + 3.40 shipping – NEW
Thanks bud, I bit on these, considering the needle nose
BMack37 wrote:
Thanks bud, I bit on these, considering the needle nose
Pretty good deals
Sent from my iPhone using Tapatalk
JimboS1ice wrote:
9 hours ago, JimboS1ice said:
Gedore 8132-140 JC Telephone Pliers Needle Nose 140mm Austria 16.00 + 4.75 shipping – NEW
Thanks Jimbo, just bought these ones. Will go nice with the set I bought from LC plus my only other needle nose pliers (NWS) are awesome but they have a straight flat nose.
Fluke 110 Plus for $40 with free shipping: http://www.ebay.com/itm/Fluke-Digital-Multimeter-110-Plus-/272518800087?hash=item3f7362e2d7:g:MtEAAOSwA3dYdp3T
I believe the 110 Plus is a SMU for Lowe’s. It is one of the Chinese line of meters but it is still very good quality. Lowe’s sells it for about $140, it frequents $80 on eBay.
Seller relisted the Fluke 27/FMs for $25. Normally these old meters sell for $50. They are bulletproof and quite accurate, made in the USA, True RMS. http://www.ebay.com/itm/Fluke-27-FM-Digital-Multimeter-POWER-TESTED-/292006401195?hash=item43fcf014ab:g:ebEAAOSwmfhX7ZwM
BMack37 wrote:
52 minutes ago, BMack37 said:Seller relisted the Fluke 27/FMs for $25. Normally these old meters sell for $50. They are bulletproof and quite accurate, made in the USA, True RMS. http://www.ebay.com/itm/Fluke-27-FM-Digital-Multimeter-POWER-TESTED-/292006401195?hash=item43fcf014ab:g:ebEAAOSwmfhX7ZwM
Yeah. These things are hands down the best automotive meter I’ve ever used. I picked up two more and some leads. Grab them guys. They beautiful beautiful machines. I’ve never once thought: “boy I’m sure glad I don’t have a meter right now”
Milwaukee M12 12V Li-Ion 3/8″ Right Angle Drill Driver 2415-20 – 84.45 + Free shipping (Comes with 1 XC pack)
MILWAUKEE M18 REDLITHIUM HIGH DEMAND 9.0 BATTERY PACK 48-11-1890 FACTORY SEALED – 132.99 + Free Shipping
Milwaukee 2750-20 M18 Brushless 1/4″ Hex Impact Driver – 53.99 + Free Shipping
Metabo GP400 Die Grinder – 110 + Free Shipping
METABO W18LTX115 W 18 LTX 115 4-1/2″ CORDLESS ANGLE GRINDER-BARE TOOL 18V – 100 + free shipping
KNIPEX Tools Knipex 8801250E 10-Inch Alligator Pliers – 31.96 + Free Shipping
JimboS1ice wrote:
17 minutes ago, JimboS1ice said:
KNIPEX Tools Knipex 8801250E 10-Inch Alligator Pliers – 31.96 + Free Shipping
Alligator pliers, same price as KC 😉 I imagine you were thinking Cobra or Chrome Alligator
BMack37 wrote:
2 minutes ago, BMack37 said:
Alligator pliers, same price as KC 😉 I imagine you were thinking Cobra or Chrome Alligator
whoops wrong one, take 2
26.87 + free shipping
I did some saw dust sniffing today, thats my excuse and I’m sticking to it!
Used Fluke 87V, no probes. $180 + $3 shipping(To Tampa): http://www.ebay.com/itm/FLUKE-87-V-87V-INDUSTRIAL-TRUE-RMS-DIGITAL-MULTIMETER-TEMPERATURE-/282337356683?hash=item41bc9e2b8b:g:jpwAAOSw241Yh9~h
Fluke 87V for $135. Missing the case and small cracks on screen but still a great deal http://www.ebay.com/itm/Fluke-87V-multimeter-true-RMS-fair-condition-/272540505384?hash=item3f74ae1528:g:umEAAOSwUKxYkB6z
wera ratcheting screwdriver kraftform 27 ra $30.00 + 7.60 shipping
Dewalt DCK277C2 refurb $100 free shipping use coupon C20PRESDAY