Disclosure: SharkBite sponsors the Tools In Action channel. Our opinions are our own.
PEX expansion connections look like magic the first time you see one. You stretch the pipe, push in a fitting, and a few moments later it’s locked on tight. In this short we walk through how expansion works, and at the end we reveal whose fittings we’re using. (Spoiler: it’s in the title.)
What It Is
Expansion is a method of joining PEX-A pipe. An expansion sleeve goes over the end of the pipe. Then an expansion tool stretches the pipe and sleeve so the fitting can slide in. Then the PEX shrinks back down around the fitting and makes a tight connection.
The sleeves in this video are clearly labeled on the bag: SharkBite PEX-A Expansion Sleeve, UA23102, 1/2 in., Qty: 50 pcs.
On sharkbite.com, SharkBite describes its Expansion Sleeves as follows:
- Used to connect PEX-A pipe to brass and poly expansion fittings.
- A chamfer makes for easy insertion, and the sleeve’s stop positions the ring on the pipe.
- An interior cross hatch stops the ring from sliding off the pipe.
- Minimum working temperature/pressure: 33°F @ 160 psi. Maximum: 200°F @ 80 psi.
- Approvals: ASTM F1960 and ASTM F877.
- For use with PEX-A or PE-RT pipe, in potable water and hydronic heating systems.
SharkBite lists UA23102 as the 1/2 in. size, with UA23103 (3/4 in.) and UA23104 (1 in.) for larger pipe.
What the Video Shows
- Sleeve on. Put the expansion sleeve on the end of the PEX.
- Expand. Put the expansion tool in and let it work. As we say in the video, “We’re expanding, we’re stretching.” That opens up the pipe so the fitting can go in.
- Insert the fitting. Push the fitting all the way in while the pipe is still expanded.
- Let it sit. Over time, the PEX shrinks down onto the fitting, and you’ve got a solid connection.
We repeat it for the other connections on the fitting. Right after you insert it, you can still move the fitting a little while the pipe is shrinking and tightening. Once it’s tight, you’ve got a watertight connection.
Then the reveal: who makes these connections? SharkBite. As we put it in the video, they make complete plumbing connections, “everything from press to expansion.”
Takeaways From the Video
What we liked:
- No torch, no glue. It’s a mechanical connection made by the pipe itself.
- It’s forgiving for a few seconds. You can still adjust the fitting a little right after you insert it.
- It’s satisfying. As we say in the video, the sound of plumbing tools is like ASMR.
- One brand for the whole system. Sleeves, fittings and tools all come from SharkBite.
Things to keep in mind:
- PEX-A only. SharkBite says its expansion sleeves are for PEX-A or PE-RT pipe. Don’t use expansion on PEX-B unless the manufacturer says it’s compatible.
- Match the sleeve to the pipe size. UA23102 is 1/2 in.
- You need an expansion tool. SharkBite sells a PEX-A Expansion Tool Kit (more below), and battery tools are also available.
- Give it time. SharkBite’s expansion tool instructions say the pipe takes a few seconds to a few minutes to contract, depending on temperature and tubing size.
About the SharkBite PEX-A Expansion Tool Kit
The YouTube description for this video points to the SharkBite PEX-A Expansion Tool Kit. According to its retail listing, it includes a ratcheting manual expansion tool, three interchangeable expansion heads (1/2 in., 3/4 in. and 1 in.), lubricant and a carrying case. It’s made for the F1960 PEX expansion system and is intended for PEX-A tubing only. If you’re getting into expansion and don’t want a battery tool, it’s a manual option from the same brand as the sleeves and fittings.
Who It’s For
This video is for anybody plumbing with PEX-A, from DIYers finishing a basement to pros running a whole house. If you’ve only used crimp or push-to-connect fittings, expansion is worth learning. It’s fast, it doesn’t need heat, and the connection gets tighter as the pipe recovers.
Watch the short above and tell us: did you guess who makes the fittings?
Where to buy: SharkBite PEX-A Expansion Sleeve


Leave a Reply