Install D-Rings on a Trailer – Hobart Adapter Cord

3

 

Recently I installed some D-rings on the PJ trailer.  I needed to use 230V for my Miller 211 Auto-set,   but my house is not wired for 230V.  So I needed to use a generator and to do that I needed an adapter cord.  I looked high and low for the right adapter.  Hobart had just the one I needed.  It is made from 1.5’ heavy duty 8/3 STW cord so it will last forever and not short out.  The receptacle lights up when it is powered so you know that you are live.

hobart adapter

I was looking for quite a while for a solution to run my welder from my generator.  I even contemplated  making my own adapter which was not cost effective or safe.  Hobart has pretty much everything you need when it comes to welding.  Check out Hobartwelders.com

hobart adapter 2

hobart adapter 5

Buy From Amazonamazon

3 COMMENTS

  1. Nice one Dan ! You could use a piece of lether to avoid burning the wood and do a chanfrin on the piece your welding for full penetration 30 to 45 degee chanfrin on half the thikness . Its a realy good welder i like it alot !

  2. Has anyone ever used the DeWalt DWS535 worm drive saw, if so could you let me know what you thought about it, I am 99 percent positive that that is the one I want to get.

LEAVE A REPLY

Please enter your comment!
Please enter your name here