Dewalt 20V Cordless Nailer DCN690 Review

18

Today is finally here, something you guys have been asking for us to review for a long time, the Dewalt DCN690 review.  This is Dewalt’s new 20V Nailers, so let’s see how it stacks up and what it has to offer.

Before we start I have to admit before using this nailer I was a huge fan of the Paslode Framing Nailer.  The issue I had with the Paslode is the expense of fuel.  I know some people complain about the smell, but that never really bothered me.  It really came down to cost and the fact that without fuel, I am down.  So if for some reason my fuel was old, I forgot it or misplaced it, I was down.  With the Dewalt, you don’t have to worry about fuel.  That is because Dewalt runs straight from their 20V battery platform.  When I first heard about this I was a little skeptical in regards to run time and performance.  I know Dewalt makes great tools, but still you never know.  I can say that after using this nailer, all my worries are put to rest.

Not only did Dewalt create a great nailer without the worries of fuel, but they included some great features.  First, this nailer uses a brushless motor which we know can be better than a brushed motor.   My biggest feature of this nailer I love is the ability to use this nailer in bump or sequential mode.  My Paslode, I have to put the nose piece on the work, then pull the trigger.  With the Dewalt, I can just pull the trigger and start firing.  Now before I go on, I just want to let you know while this nailer is fast, it will not keep up with a pnematic nailer in speed.

Not a huge deal, but it would be nice to see this nailer utilize a method for tool free jams.  Currently you need a hex wrench (Stored on the tool) to remove a jam.  Not a huge deal because most don’t offer this with a framer.  On the front you have the ability to turn a wheel and adjust the depth.  I have to say this does a very good job and stays true shot after shot.  Dewalt also implemented a trigger lock feature so when not in use, you can lock the trigger.

On the handle is a rafter hook which hides nicely when not in use.  The hook is made from an ABS plastic, so it should hold up under rough conditions.  On the top of the nailer, there is a lever.  This lever resets the driver blade if the tool stalls or after clearing a jam.  We only had to use this lever one time and it worked as indicated.

Now I heard some people aren’t sure what nails to use with this gun, but you can use a common framing nail which pretty much any store has.  The magazine is a lock and load system with s 33° and holds 55 nails.  The nail gauge is from .113 to .131 gauge and can drive nails from 2″ to 3-1/2″ nails.

While the balance of the nailer could be a little better, it’s not really bad, but just wanted to note it.  The nailer weighs in at 9.1 lbs. so it is a little heavier than the Paslode.  This one was hard to find, but it looks like you can shoot about 600 nails per charge with cleaning after 50,000 nails.  I have to say Dewalt hit a home run with this nailer.  The ability to lose the fuel and run straight from a battery is a huge money saver.  The nailer fired great time after time never seeming like it was struggling.   The ability to move quickly from bump to sequential is a great feature. Having a grip styled after the 20V drills makes this a tool that is easy to work with all day long.  Bottom line if you are looking for speed, this won’t replace a pneumatic nailer.  If you’re looking to get away from loud air compressors and fuel, the Dewalt is a great alternative.

 

 

18 COMMENTS

  1. Great review Eric. I have the Paslode and I like it but you are right about the fuel . It is a pain in the ass when you in the middle of a job and you run out or your fuel has expired. Now you have me thinking about selling my Paslode and moving over the the DeWalt.

  2. Great Writeup Eric, This really seems like a great nailer, I wonder why it took so long for production here in the states. I really wish Milwaukee would give a cordless nailer a shot, its great not to have to deal with the hoses and noise of an air compressor!! Keep up the great reviews!

  3. This is one tough looking monster. I’ve always used the Bostich finish nailers with a compressor. I’m not familiar with the actual heavy duty nailers for framing. Do you know if Dewalt will be venturing in smaller cordless nailers. I would love to have something more mobile to shot brands inside workspaces without worrying about hoses. Also, its tough logging a compressor plus the nailers. Dreaming of a nailer like this one that shoots small nails would be ideal. Maybe I should stop crying. What I have is better than a hammer and bag of nails. Laters TIA

  4. You made me really want one! I’m still drooling. Dewalt IS innovative!! Slick Slick!

    On a side note, Love your new Author Description, paper folder…diverse background in what we don’t know…shredded cheese organization. LOL!! Funny! Love it!!

  5. I’ve had this nailer for two months and I love it, it will pay for itself in no time. I recon $12 a day Is being saved using this nailer over a Paslode. If you are looking to get a new nailer, put your money down on this nailer, you won’t be disappointed. The video is exactly the way the nailer performs.

  6. Hi Juan F. Dewalt does have a cordless brad and finish nailer but they are the old 18v NiCd platform, the DC628k is a 1 1/4″ to 2 1/2″ 15 gauge 34 degree angled finish nailer and the DC608K is a 2″ 18 gauge brad nailer. they also have a 20 degree 16 gauge finish nailer model DC618K. Thanks for another good video and write up Dan and Eric.

  7. Brody, thanks for this info. I do have the 18v platform, so this is good. I’ll go ahead & do a little research to see if they are affordable now that 20v line up is increasing. Maybe I’ll stick to my Bostitch nailers if cost is high. It would be good not to carry a compressor everywhere. Thanks again

  8. I have just been told by a company, that sells them, that they have a very high break down rate. You have to replace an expensive spring them often, so the amount you would save on gas is spent on springs and maintenance.
    Maybe you should add this to your review?

Leave a Reply to Eric Jopp Cancel reply

Please enter your comment!
Please enter your name here