DeWALT TSTAK Storage Boxes – Review

11

If you have been following us you know that DeWALT makes the toughest storage solutions on the market with the Tough System.  The Tough System is great but what if you need a smaller option?  Luckily the TSTAK came along to fill that void, think Tupperware for men.  The TSTAK was designed from the ground up for the user, not just some rebranded existing storage system.  The TSTAK system is innovative, tough and is perfect for almost any task.  Unlike the Tough System,  there is no rubber seal on the TSTAKs to prevent moisture from getting in.  Right now there are 4 boxes available and a cart is coming soon. All of the boxes have areas where you can insert a a label and metal rust proof latches. All boxes are covered by a limited lifetime warranty.   None of the boxes are the same and each have a unique key feature which I will explain below.

tstak1

TSTAK I – DWST17808 

Dimensions: 17.3″ L / 7.3″ W / 13″ H

This is the top box, it has a big handle that allows you to pick up the entire system when the other boxes are attached to it.  You can carry the box individually using the side handle also.  It weights 5.57lbs and holds up to 66 lbs.  The box has a 2 lids, one opens to reveal 7 compartments that are fixed and the bottom lid opens to reveal a big storage area.  All of the TSTAK boxes can be stacked on top and bottom except for this one, it has to be the top box.

TSTAK II

TSTAK II – DWST17807

Dimensions: 17.25″ L / 6.375″ W / 13″ H

This TSTAK closely resembles the TSTAK I only it has no compartments and is a big storage box.  You can stack and lock other boxes on the top and bottom of this box.  It is great for power tools and big items like chargers and batteries.  It weighs 3.96 lbs and holds 66 lbs.

Tstak III

TSTAK III – DWST17803

Dimensions: 17.25″ L / 6.875″ W / 12.25″ H

This box is great, it has a pull out drawer that is on ball bearing slides.  It also locks shut via 2 plastic tabs on either side of the drawer.  Inside the drawer is a variety of enclosed plastic boxes to better manage your parts or screws.  You just pull the box out and take it to the job.  I could see using these to organize my shop.  It weighs 8.4 lbs and holds up to 16.5 lbs.

TSTAK IV

TSTAK IV – DWST17804

Dimensions: 17.25″ L / 6.875″ W / 12.25″ H

2 drawers separate this TSTAK from the rest of the boxes.  Like the III it has ball bearing slides to make the drawers open and close smoothly. It has the same locks as the TSTAK III.  Each drawer has dividers that can be custom configured.  The great thing about the drawers is that you don’t have to un-click other boxes to access your items.

 

Rugged, tough and priced right.  TSTAKs are the best all around storage system on the market today.  You cant go wrong with this storage system and rumor has it that a cart is on the way.  I would choose these over an Lboxx any day.  Lboxxs have no warranty while the TSTAK has a lifetime warranty.  The TSTAKS are also easier on your pocket book than the Lboxx.  If you are looking for a more sealed dust and waterproof system check out the the Tough System.

 

[pptgtool]KDvz1A3S_4g[/pptgtool]

[pptgtool]v-nvp1KY-tI[/pptgtool]

Check out Tool Skools in-depth video of the TSTAK

[pptgtool]brQUMj4mbjk[/pptgtool]

 

11 COMMENTS

  1. I just bought the DEWALT DEEP PRO ORGANIZER for $20.00 which I thought was an
    excellent deal at our local Orchard Supply and Hardware store.
    The double stack boxes were stacked together and I only paid 20 bucks for both.
    Now I am waiting for someone to bust my bubble and tell me that is what they sell
    for as a set, cause I am thinking that I got a good deal both for $20 bucks.
    Bar code is on both boxes, but you wouldn’t know that unless you took them apart.
    The gal at the register didn’t know it either.

  2. that would be perfect for impact and hammer drills for concrete/construction, there are so many ways to organize screws and wood and masonry bits and driver bits.

  3. Nice boxes but moving them when full is a chore. How you are able to get at the tools and use them is more important. OTLVISE tool carrier with adjustable shelves can move all types of tool boxes and allot more. Battery pack, halogen light etc makes it very useful and more. Check out website and you can see how easy it all is. Custom features as well.

  4. Stanley is doing some thing similar to the tstack , and they have a nice rolling tool bin with some space for level ,saw ,ect. And a telescopic handle . I hope dewalt gone have one for the tstack . Go look YouTube : Stanley modular rolling workshop

Leave a Reply to Jeth Cancel reply

Please enter your comment!
Please enter your name here